Plywood, floors, furniture, doors, musical instruments and ornaments, agelin pedra, amapa, cedro rosa, cerejera, curupixa, figueira, freijo, goiabao escuro, goiabao claro, imbuia, jequitiba, jatoba, marfim, marupa, sucupira, taunari and pau-ferro (santos palessander).
Softwood plywood, hardwood plywood, fancy plywood, film faced plywood, decking, rough sawn lumber, flooring, doors.
Wood, timber, decking, doors, flooring, plywood.
Plywood, lumber, hardwood decking, hardwood flooring, pine lumber, pine panels, sliced cut veneers, rotary cut veneers, finger jointed components, film faced plywood, teak lumber and special lumber items.
1) Goods: PALO SANTO / LIGNUM VITAE CYLINDERS - Info about Palo Santo / Lignum vitae (Bulnesia sarmientoi): Heartwood is greenish and It is often beautifully figured with blackish green fine veins. This specie has smell (good and pleasant smell) - Characteristics of the product: Logs freshly cut. Cylinders not very shapely; without Bark or maximum of 10% of bark on surface; and without sapwood or a maximum of 25% of sapwood on the surface. Each Cylinder is sealed by wax on all Surface and on both Tops also. - Quality: A-grade and better (oiled wood and with smell). - Sizes: . Diameters = from 200mm up to 450mm and up. . Lengths = 1,000mm and longer. * Note: These goods are raw material are much more suitable for Customers who want to have good quality in Lumber, as well as, who want to have a good and high yield in the production of the end products, such as: Rough sawn timber, Planed lumber (S4S) to produce Flooring (solid wood and engineered); Furniture (home & office); Interior home stair (planking & banister); Furniture and Interior decoration for Yacht;. As well as to produce: Stern tube bearings (Bearing or Bushing blocks lining of the stern tubes of propeller shafts of steamships). Attention: The great strength and tenacity of this wood, combined with the self-lubrificating properties due to the oil content, make this wood especially adapted for products under water. It is raw material to produce: Pencil vase, Carvings, Bowling balls, etc. - Capacity of loading = about 26 Tons in each 40â??CNTR. If you have a question, please, donâ??t hesitate to contact to us on: supplylumber at terra.com.br, and so, we will send to you other Details and Photos relating to this product made by our Company. Henry Chavez
1) Goods: WALNUT LOGS - Info about Walnut (Juglans australis): The heartwood is chocolate-brown and generally darker than the North American black walnut (Juglans nigra), sometimes with a purplish cast. - Characteristics of the product: Logs freshly cut. The Logs have Heartwood and the sapwood and bark. The Bark and Sapwood remain on logs to avoid cracks on Surface. Each log is sealed by wax at both ends to prevent cracks on the tops during transit time from port of loading to port of destination. - Quality: A-grade and better. - Sizes: a) Diameters = 40cm and up. b) Lengths = 240cm and longer. - Capacity of loading = about 26 Tons in each 40â??CNTR. - Uses: These goods are much more suitable raw materials for Customers who want to have good quality in Logs, as well as, customers who want to have a good and high yield in the production of Rough Sawn Wood, Planed Wood (S4S) when their objective is the production of final products, such as: Furniture (home & office); Cabinet work; Desks; Interior decoration (products and items of high class); Furniture and Interior decoration for Yacht; Musical instruments & parts of the musical instruments; Interior joinery; Cabinetry; Gunstocks, Cables of knives and cutlery; Decorative fittings and other high-class wooden products. As well as, Decorative veneer; Sliced veneer; Table tops and Wood slabs. If you have a question, please, donâ??t hesitate to contact to us on: supplylumber at terra.com.br, and so, we will send to you other Details and Photos relating to this product made by our Company. Henry Chavez
Balsa Furniture Wood Board /Solid Wood Panel Grade AB Usage House decorative(wall, floor, door, window),furniture(drawer, cabinet, table,),coffin, arts Size Length&width &Thickness: as your requires Features 1. 40% lighter than other wood 2. Smooth face and back, sanded 3. Bi-components environmental friendly waterproof adhesive 4. Moisture below 12%
Product Description :- Edge Glued Panels produced with pine wood, utilized for construction purposes, carpentry or DIY projects. Price of product ( USD price or FOB price) :- Under consult according to specs provided. Product origin :- Brazil Key Specifications/Special Features :- Standard dimensions: 18 x 200/300/400/500/600 x 2000 mm with or without fingerjoint. For different measures please advise. FSC Certification available. Qualities available: Clear, Rustic, Knotty and others. Quality guidelines to be provided by final customer or can be developed alongside with Index-IBL. Port of Loading: Itajai/Navegantes or Itapoa Lead Time: 30 days plus shipping Minimum Order Size and Packaging details :- MOQ: 1 x 40' HC Packaging: Palletized and strapped, for different packaging specs, please advise.
Product Description :- Pine doors with different finishes available. Can be offered pre hang, flush doors, moulded doors, primed or raw finish. Availability for both interior and exterior. Price of product ( USD price or FOB price) :- Under consult according to specs provided. Product origin :- South America Key Specifications/Special Features :- Components designed under the clients specs with many options of milling available as tenons, round cuts, and CNC routing. Port of loading: Itajai/Navegantes or Itapoa Lead Time: 45 days plus shipping Minimum Order Size and Packaging details :- MOQ: 1 x 40' HC Packaging: Palletized, strapped and cardboard protectors, for different packaging specs, please advise.
FSC and non FSC pine wood timber, panels, moldings, door components and furniture components.
