An eye bolt is a bolt with a loop at one end. They are used to firmly attach a securing eye to a structure, so that ropes or cables may then be tied to it. Eye bolts can be used as a connection point for rigging, anchoring, pulling, pushing, or hoisting applications. Size: M10 to M100
A stud bolt is a mechanical fastener having external threads without a head. The external thread is either for the full length of the stud or partially threaded from each end. It uses at least two nuts, one on each side for assembly connection. Stud bolts are available in various sizes, types, and threading patterns. Size: M3 to M30
A U-bolt is a bolt in the shape of the letter U with screw threads on both ends. U-bolts have primarily been used to support pipework, pipes through which fluids and gasses pass. As such, U-bolts were measured using pipe-work engineering speak. A U-bolt would be described by the size of pipe it was supporting. U-bolts are also used to hold ropes together. Size: M6 to M20
Hex bolts are a type of threaded bolt, characterized by their six-sided hexagonal-shaped head. Hex bolts can be either fully threaded or partially threaded (featuring a clear shank along part of the body) and are suitable for use in a wide range of applications, typically machinery and construction. Size: M4 to M80 Grade: 10.9 Dimensional Specification: ISO 4017 (Full Thread) ISO 4014 (Half Thread) Material Specification: ASTM F879 304 Tensile Strength: 1040N/mm min
Cross counter sunk self drilling bolt / screws Finish: zinc coated Head style: cross recessed countersunk Length: 13 mm, 16mm, 19 mm, 25 mm, 32 mm, 38 mm, 50 mm, etc.. Materail: stainless steel, steel
ZB6741-8 Name stainless steel eye bolt Material stainless steel 304 Suface finish Mirror polishing MOQ 1 PC Technqiue investment casting Packing opp bag+ carton Brand Richwits Speficication of stainless steel eye bolt This eye bolt is casted by precision casting in material stainless steel 304 . The size is M8. The overall length is 36 mm. Surface is polished The surface is mirror polished . Good material and excellent polishing quality make it has good performance on anti-rust and corrosion resistance . Stainless Steel 316 eye boltWhen chain , shackle or belt strap goes through this eye bolt , it will not slip widely. It brings you more comfortable feeling when you use swing...1 sizes are available for you ï¼?M8 If there is no size you need, please feel free to let us know. Zhibo is a professional manufacturer of stainless steel marine hardware and rigging hardware. In our factory , you can get anchors, hinges , deck fillers, fishing rod holders , eye plates , eye botls, shackles , turnbuckles, thimbles, carabiners and soon. Most of them can be supplied from stock. Low MOQ is acceptable. Contact us now for more details!
ZB6740-8 this eye bolt is casted by precision casting in material stainless steel 304 . The size is M8. The overall length is 48 mm. Surface is polished When chain , shackle or belt strap goes through this eye bolt , it will not slip widely. It brings you more comfortable feelingwhen you use swing... Wudi Zhibo Metals Co., LTD is meanly engaged in the metal products. Our business is a system includes the designing, production, machining and selling. Our products are camlock coupling, rigging hardware, marine hardware, auto accessories ,as well as the machine parts .According to the standards of API ANSI BS DIN JIS, the products are made to pretty , rational construction, superior performance. The material of our products is kinds of stainless steel ,such as 304\316\316L ;aluminum; brass; pp; nylon and carbon steel. The products are used in many area covering the marine transport, petrochemical industry, Pharmaceutical papermaking, food industry ,electricity industry and so on. Our products are exported to America England, France, Canada, Australia, Holland, Japan and Korea, and the domestic market is vast too,which gain many trust and favorable receptions home and abroad.
Tower Bolt
SS Tower Bolt
Tower Bolt
Swivel Sheetb Metal With Eye Bolt
Finish: Plain, Polish, Passivation Material: Stainless steel, Stainless steel Model Number: GXPR01 Name: full thread hex bolt size: M24 M30 M36 Certificate: ISO9001 Grade: A2-70 A4-70 A4-80 Type: hex head Color: Silver
Hex Bolt DIN 933 Full thread DIN 934 Half thread Grade 8.8, 10.9 Finish Black, Zinc, HDG all types of coating available.
Anti-corrosion Mechanism Duplex coating is a combination of hot-dip galvanizing and epoxy coating. Firstly, product is hot-dip galvanized, and then epoxy powder is sprayed on the surface. The anchor bolt has better anti-corrosion performance and longer service life after two kinds of anti-corrosion processes. It can not only resist ordinary chemical corrosion, but also work in acidic environment and electrochemical corrosion with stray currents. Product Standard Duplex coating combines all the performance parameters of hot-dip galvanizing and epoxy coating. Hot-dip galvanizing meets the requirements of the table below. Epoxy products are mainly based on EN 13438 Paints and varnishes - Powder organic coatings for hot dip galvanized or sherardized steel products for construction purposes, with a minimum coating thickness of 60um. Bending performance of epoxy coating complies with ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel). Impact performance meets ASTM D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact). Adhesion conforms to ISO 2409 Paints and varnishes -Cross-cut test. Featurs and Advantages Excellent anti-corrosion properties: As zinc is an active metal, after coating surface is damaged, it will protect the steel by battery effect. Long service life: Zinc layer is consumed very slowly in the atmosphere, so its service life far exceeds that of any other coatings. Full protection: As immersed into hot-dip galvanizing bath�¯�¼?products are fully protected and anti-corrosion effect is better. Lower price: In most cases, the hot-dip galvanizing cost is lower. Zinc coating is more durable than others, and does not require maintenance in the future. High processing efficiency: Hot-dip galvanizing bath is simple and efficiency is higher than other coatings. After curing, the coating material will not melt even if it is heated again. It has high chemical stability. The formed coating has high adhesion to metal, low drying shrinkage and high ductility. In the case of the coating is not damaged during operation, it can effectively block corrosive substances. Service Life The service life of duplex coating anchor bolt is usually much longer than single anti-corrosion treatment, which is a synergistic effect. In most environments, the service life of duplex coating anchor bolt can reach 100 years without maintenance; the first maintenance service life of duplex coating anchor bolt in a severely corrosive environment is nearly double that of hot-dip galvanizing anchor bolt. Application Duplex coating anchor bolt is generally used in the permanent support of hydro-projects, underwater tunnels, subway tunnels and some important buildings affected by groundwater for a long time. And it is also widely used in harbors, wharfs, offshore buildings which are corroded by seawater.
Shape Eyebolts Size M8 M10 M12 M16 M20 M24 M30 M36 M42 M48M52 M56 M64 M72M80M90M100 Thread type Metric Material Steel, alloy steel,Stainless steel Grade 4.8, 8.8,10.9,12.9,A2,A4 Standard DIN3266 EN3266 ISO3266,GB /T27696,UNI2947,DIN580,DIN444 Coating Zinc
ASTM A325/A490 Heavy Hex Structural Bolts Finish Hot Galvanizing Sample Contact with Us Transport Package 25kg/Carton, 36carton/Pallet Specification M6-M48 Origin HANDAN, China Production Capacity 800t
Product Description: 1. Steel Grade: S45C 2. Wire Size: 3.0~24.0mm 3. Standard: JIS G3507 4. Technical Process: PASAIP 5. Certification: ISO9001, SGS,CTI
Stainless steel self drilling anchor bolt is made of stainless steel materials. It is an alloy steel self drilling anchor bolt which can resist corrosion in air or chemical corrosion conditions. Functions: Owning to its good welding performance & inoxidizability, stainless steel rock bolt are mainly used in the permanent support of large initial stress of surrounding rock, or other projects which have special requirement for corrosion resistance, such as sub-sea tunnel, seaport, seawall and some projects in the industrial pollution area. Conditions: It applied to marine environment and chloride corrosion. It is also used to chemical industry and infrastructures of important equipment which requires high anti-corrosion quality. It widely used in bay, pier, pile foundation, breakwater and mooring system. Features and advantages: 1. Good anti-corrosion quality and antioxidant activity. 2. High temperature oxidation resistance, resisting fire at a certain extent. 3. Stainless steel has good strength and high wear resistance. 4. Its anti-corrosion and resistance to chloride is prior to other coating re-bars due to its repairing oxide layer. Cases: Stainless steel self-drilling anchor bolt system is mainly used for tunnel and underground engineering, slope engineering, ground and foundation engineering. It can be used for pre-construction support and can effectively enhance the stability of soil and rock mass.
Anti-corrosion Mechanism Immerse the derusted anchor bar and accessories in liquid zinc for a certain time, so that the atoms can penetrate and diffuse each other, thereby forming an iron-zinc alloy layer, which is dense, uniform, firmly bonded, bright and corrosion resistant. Zinc is an amphoteric metal. In thermodynamics, zinc has a stable area. Hot-dip galvanizing is an electrochemical anti-corrosion method, which hinder further corrosion through insoluble chemical substances produced by interaction between zinc and concrete solution. Product Standard Sinorock has formulated the standard for galvanized products coatings in accordance with ISO 1461 " Hot dip galvanized coatings on fabricated iron and steel articles Specifications and test methods". The coating thickness of main products is as follows: Featurs and Advantages Excellent anti-corrosion properties: As zinc is an active metal, after coating surface is damaged, it will protect the steel by battery effect. Long service life: Zinc layer is consumed very slowly in the atmosphere, so its service life far exceeds that of any other coatings. Full protection: As immersed into hot-dip galvanizing bath, products are fully protected and anti-corrosion effect is better. Lower price: In most cases, the hot-dip galvanizing cost is lower. Zinc coating is more durable than others, and does not require maintenance in the future. High processing efficiency: Hot-dip galvanizing bath is simple and efficiency is higher than other coatings. Not affect steel performance: Hot-dip galvanizing is carried out in an environment of more than 400 �¢??, and will not affect the performance and toughness of steel. Service Life Generally, the service life of hot-dip galvanized products is more than 50 years in most environments, and it will be different according to corrosion level of the environment. According to ISO 12944-2 "Paints and varnishes- Corrosion protection of steel structures by protective paint systems-Part 2: Environmental classification" (equivalent to GB/T 30790.2), The table below lists the reference rates for different atmospheric-corrosivity environment categories.
We Produce DIN931 Full threaded bolts of all qualities, 4.8,5.6,5.8,6.8,8.8,10.9,12.9 and facilitate with modern coatings like HDG, MAGNI, GEOMET etc.
