SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Product Brands: ABC, ABC Alkaline. Available Variants: AAA, AA, C, D, 9V Product of Indonesia
Energizer E91 AA Model No.: E91 Size: AA Nominal Voltage: 1.5V Nominal IR: 150 to 300millionhms Operating Temp: -18â?? to 55â?? Typical Weight: 23.0 gram Shelf Life: 10 years Energizer E92 AAA Model No.: E92 Size: AAA Nominal Voltage: 1.5V Nominal IR: 150 to 300millionhms Operating Temp: -18â?? to 55â?? Typical Weight: 11.5 gram Shelf Life: 10 years
1. Voltage: 3.0v 2. Capacity: 210mAh 3. End voltage: 2.0v 4. Package: blister card packing(5pcs/card) or bulk packing.
PSL60S. Floor-type 3-phase 5-line DC ev charger. It is applicable to US, EU, JP, UK and other international electrical standards of 380V - 15%, 60KW commercial type 2 electric vehicle intelligent charging station. technical parameter: Input rating: 380V ± 15%; Rated power: 60KW; Output voltage range: 150-1000VDC; Output current range: 0-250A; Connector type: NEMA 6-20P / 5-15P, NEMA 6-50P / 14-50P; Support communication: APP, RFID Card, Button; External Communication 3G\4G LAN(RJ-45) and WIFI Connector: 2 sets; Cable length: random standard with 5m. Support to purchase 10m, 15m; Operating temperature: -25C~ + 50C; Operating humidity: 5%~98%; Key surface index: charging time, real-time current / voltage / power supply / connection / charging / fault; 7-inch highlight color LCD screen; Working life of connector machinery: 10000 times (no-load plugging); Quality assurance: 12 months; Waterproof grade: IP54; Product certification: 3C, CE, ROHS, REACH, cULus. Commodity features: Smart charger product 3-phase; DC 380V± 15%; DC / ac smart charger covers byd, nio, xping, ideal car, aion, ZEEKR, audi, BMW, Chevrolet, Mercedes, porsche, Volkswagen, Volvo, Tesla, Citroen, fish, ford, mitsubishi, nissan, Peugeot, Renault, Smith, tower, Toyota, Honda, prius, chery, walker most countries such as electric car market family (residential) and commercial purposes; Safety design / multiple protection: underpower protection, overvoltage protection, overload protection, overcurrent protection, overwet protection, leakage protection, grounding protection, lightning protection, electrostatic protection, flame retardant protection; Waterproof grade: IP54; Noise control: 60dB; Human-machine interface: 7-inch LCD color display screen touch screen, LED indicator light; OLED screen: display the charging current, voltage, output energy, charging time, status information, fault information, etc.; Body materials: metal; Quality assurance: 12 months; Device selection: support OEM customization. Step Price (FOB): 1. Sample unit price,USD27825.00 2. 200set, USD16695.00 3. 400set, USD15025.50 4. 600set, USD13523.00 5. 800set, USD12170.70
Small size and lightweight, convenient to carry, Easy and safe to use, no sparking 6 LED displays, clearly present the alternator and battery state. Two testing clips for safe and easy operation. Suitable for 12V lead-acid batteries, hardtop batteries, discharge batteries, and maintenance-free batteries heavy duty insulated clamps. Multiple functions- Alternator state check, battery state check, Battery overload display With a good chip inside, not easy to get hot on the surface, suitable for cars, motorcycles, etc.
Small size and lightweight, convenient to carry, Easy and safe to use, no sparking 6 LED displays, clearly present the alternator and battery state. Two testing clips for safe and easy operation. Suitable for 12V lead-acid batteries, hardtop batteries, discharge batteries, and maintenance-free batteries heavy duty insulated clamps. Multiple functions- Alternator state check, battery state check, Battery overload display With a good chip inside, not easy to get hot on the surface, suitable for cars, motorcycles, etc.
Battery Tester Checker Universal Battery Tester Monitor (BT01) Quick Sense(BT01): Battery Tester Checker Universal Battery Tester Monitor for AA AAA C D 9V 1.5V Button Cell Batteries Easily check if the batteries are good or bad. It can test different types of batteries, even rechargeable ones. Fit For: AA/AAA/C/D/9V/1.5V Button Cell Battery (Batteries not included) This will keep you from wasting good batteries by throwing out good ones. Small and practical - Simple but effective little battery tester checker(BT-168), compact size and lightweight, easy to carry.
Digital Battery Tester Household Battery Checker Tester for Small Batteries Button Cell BT-168D Digital Battery Tester for AAA AA C D 9V 1.5V, Household Battery Checker Tester for Small Batteries Button Cell (Model: BT-168D) Get accurate readings on AA, AAA, C, D, and 1.5V 9V batteries Easy-to-read, digit indicates power level Check power level of 9V and 1.5V battery Quickly test the capacity of your battery Lightweight and compact design measures 11Ã?? 6Ã?? 2.5 cm Never again get caught with a dead household battery. This handy digital battery tester makes it easy for you to get the most out of your batteries and lets you know when it is time to get a new one.
Item N135 car battery rated capacity 135AH size 511*189*225MM Nominal voltage: 12V Type: lead-acid Separator: PP separator Brand name: your own-brand name available AMP(at-18â??): 860 Flame retardant container: plastic Own brand: Largestar, TNT, Booster Employee: over 400 Applications: starting battery for cars, buses, trucks and other vehicles Certificates: ISO9001, ISO14001, CE, SASO, SONCAP etc Dimension: custom-made special dimension Advantages: 1. High temperature resistant 2. Greater vibration resistance 3. Low self-discharge 4. More 30% service battery life 5. Warranty Typical applications 1. Starting battery for cars 2. Buses trucks golf cart 3. Tractor 4. Mine vehicle and other vehicles Features: 1. Applications: starting battery for gasoline engine tricycles and cars, motorboats, motorcycles, ATVs, buses, trucks golf cart, tractor, mine vehicle and other vehicles. 2. Delivery: within 30 days after signing contract and receiving 30% deposit 3. Packing: cartons with pallet 4. Deliver from Shanghai, China 5. Certifications: ISO 9001: 2000, ISO 14001, ISO/TS 16949, CE, SONCAP 6. Custom-made special dimension (even provide brand and carton design) 7. Enhanced safety, excellent starting performance at cold temperature, low self-discharge and water consumption
Battery Rmf 2.5lc
Roots Ignite Battery Rmf 5 Lb
Roots Ignite Battery Rmf 7b
Roots Ignite Battery Rmf 9b
Roots Ignite Battery Rmf Z4
Roots Ignite Battery Rmf Z5
Hi, My name is Darcy Huang and I am the Sales Manager of PLB. PLB is a high-tech enterprise and specializes in R&D, manufacturing 26650 lithium ion battery in Dongguan China. Our factory has been working since Feb 10th, If interested to acquire please let me know, I would love to provide more information on this. Thank you. Darcy@plb.com.cn
12 V MAINTENANCE FREE CAR BATTERY
Product description 1. Model: 9.6v 2/3a1400mah ni-mh high power rechargeable battery pack for airsoft gun (8s of fh-2/3a1400p). 2. Un, rohs, ce approved ni-mh battery pack. 3. Ni-mh battery pack oem orders are welcomed. 4. Ni-mh battery pack is widely used to consumer portable equipments, information devices, miner lamps, power tools, remote control toys, medical devices, vacuum cleaner, cordless phone, etc. 5. Bulk pack, blister card are available. 6. For ni-mh high power series 2/3a size other capacity are available from 900mah to 1600mah. 7. Customizes shapes, capacity, and voltage are accepted. 8. Individual cells can be assembled in parallel or series into stacks as required by customers. 9. No memory effect, high voltage, high energy density, long cycle life. 10. Eco-friendly. Cell:Ni-mh Model:8s of fh-2/3a1400p Nominal voltage:9.6v Nominal capacity:1400mah Minimal capacity:1300mah Charge current:Standard charge : 0.1c(140ma) Rapid charge : 0.5c(700ma) Charging time:Standard charge : 16.0 hours (ref.) Rapid charge : 2.4 hours (ref.) Continuous discharge current:10c (14a), discharge average voltage:1.13v per sigle cell Cut-off discharge voltage:6.4v Dimensions(t*w*l):Approx.: 18.5mm* 36mm * 122mm Weight:Approx. 200g Operating temperature:Charge : 0 ~ 45 ºc Discharge: -10 ~ 60 ºc Storage temperature:At -5 ~ 35 ºc recommend(25±5 ºc) Control required 1) -?v: 0 ~ 5mv 2) d t / d t: 0.8 ºc/ min 3) t co: 40 ~ 45 ºc NoteStorage capacity should be 40%~50% full charge capacity.
Product description 1. Model: ni-mh battery 14.4v d9000mah rechargeable battery pack(12s of fh-d9000). 2. Un, rohs, ce approved ni-mh battery pack. 3. Ni-mh battery pack oem orders are welcomed. 4. Ni-mh battery pack is widely used to consumer portable equipments, information devices, miner lamps, power tools, remote control toys, medical devices, vacuum cleaner, cordless phone, etc. 5. Bulk pack, blister card are available. 6. For ni-mh standard industrial series d size, other capacity are availabe from 2500mah to 10000mah. 7. Customizes shapes, capacity, and voltage are accepted. 8. Individual cells can be assembled in parallel or series into stacks as required by customers. 9. No memory effect, high voltage, high energy density, long cycle life. 10. Eco-friendly. Ni-mh 12v d9000mah rechargeable battery pack(10s of fh-d9000) CellNi-mh Model12s of fh-d9000 Nominal voltage14.4v Nominal capacity9000mah Minimal capacity8800mah Standard charge900 ma, 16 hrs Rapid charge: 4500 ma, 2.2 hrs (control required) Continuous discharge Less than 9000 ma Final discharge voltage1.0 v (less than 1.0c) Service life =500 cycles (iec61951-2-2003) Dimension(w*l*h) 65mm*198mm*65 Weight Approx. 1960 g Ambient temperature:Standard charge: 0~45 ºc Rapid charge: 10~40 ºc Discharge: -20~50 ºc Store (65+20% rh)Less than 360 day: -20~30 ºc Less than 30 day: -20~40 ºc Notes: 1."c" behind the model no. Refers to normal consumer series ; 2. Capacity obtained after charge at 0.1c for 16 hrs and discharge at 0.2c to 1.0v at 25 ºc; 3. Control required: 1) -?v: 0 ~ 5mv 2) d t / d t: 0.8 ºc/ min 3) t co: 40 ~ 45 ºc
