Type:Li-Ion, Li-polymer Capacity 6000mah Voltage 22.2v Discharge rate 100c Max discharge rateï¼?200c Size:155*49*68 mm Weight: 999.6g Pack resistence: 24m Plug XT60 XT90, EC5, or customized Applicationï¼?Racing drone ï¼?uav ï¼?rc helicopterï¼?model aircraft ï¼?rc plane
Capacity� 5000mah Voltage�22.2v Discharge rate: 80c Max discharge rate :160c Size:155*49*54.6mm Weight:825.8g Pack resistence:16mΩ Plug�XT60,XT90,EC5 or customized Application:Racing drone,uav,rc car, rc helicopter
Super tank Polymer Concrete Electrolytic Cells are designed, built and installed to satisfy the most stringent requirements requested by tank house operators worldwide. In most case their main request is to guarantee full operating availability throughout the plant' s lifespan, maximizing production of high-purity metal (copper, zinc, nickel, cobalt, lead or other) with absolute safety for people and the environment. Additionally, Polymer Concrete Electrolytic Cells must accommodate changes for continuous improvement of electrolytic process, integrating efficiently with upgrades of complementary equipment such as anodes, cathodes, cap boards, overhead crane, electrolyte agitation systems, acid mist control devices, thermal insulation, among many others. Super tank electrolytic cells are cast monolithically based on a patented, three stratum composite material system. the internal stratum is a monolithic tank made with multiple layers of fiber-reinforced vinyl ester resin (FRP) complying with chemical barrier international norms that assure long term impermeability and corrosion resistance. the intermediate stratum is the structural core made with Hyperbonded Polymer Concrete, with a patented formulation to achieve a low coefficient of thermal expansion, providing long term structural integrity with low thermally-induced stresses. the external stratum is a standard seal layer of FRP that further protects the structural core from electrolyte splashes and spills. Optionally, this external seal may be specified with multi-layered oriented fiber reinforcements to guarantee trouble-free operation in unusually extreme operating environments.
Super tank Polymer Concrete Electrolytic Cells are designed, built and installed to satisfy the most stringent requirements requested by tank house operators worldwide. In most case their main request is to guarantee full operating availability throughout the plant' s lifespan, maximizing production of high-purity metal (copper, zinc, nickel, cobalt, lead or other) with absolute safety for people and the environment. Additionally, Polymer Concrete Electrolytic Cells must accommodate changes for continuous improvement of electrolytic process, integrating efficiently with upgrades of complementary equipment such as anodes, cathodes, cap boards, overhead crane, electrolyte agitation systems, acid mist control devices, thermal insulation, among many others. Super tank electrolytic cells are cast monolithically based on a patented, three stratum composite material system. the internal stratum is a monolithic tank made with multiple layers of fiber-reinforced vinyl ester resin (FRP) complying with chemical barrier international norms that assure long term impermeability and corrosion resistance. the intermediate stratum is the structural core made with Hyperbonded Polymer Concrete, with a patented formulation to achieve a low coefficient of thermal expansion, providing long term structural integrity with low thermally-induced stresses. the external stratum is a standard seal layer of FRP that further protects the structural core from electrolyte splashes and spills. Optionally, this external seal may be specified with multi-layered oriented fiber reinforcements to guarantee trouble-free operation in unusually extreme operating environments.
Super tank Polymer Concrete Electrolytic Cells are designed, built and installed to satisfy the most stringent requirements requested by tank house operators worldwide. In most case their main request is to guarantee full operating availability throughout the plant' s lifespan, maximizing production of high-purity metal (copper, zinc, nickel, cobalt, lead or other) with absolute safety for people and the environment. Additionally, Polymer Concrete Electrolytic Cells must accommodate changes for continuous improvement of electrolytic process, integrating efficiently with upgrades of complementary equipment such as anodes, cathodes, cap boards, overhead crane, electrolyte agitation systems, acid mist control devices, thermal insulation, among many others. Super tank electrolytic cells are cast monolithically based on a patented, three stratum composite material system. the internal stratum is a monolithic tank made with multiple layers of fiber-reinforced vinyl ester resin (FRP) complying with chemical barrier international norms that assure long term impermeability and corrosion resistance. the intermediate stratum is the structural core made with Hyperbonded Polymer Concrete, with a patented formulation to achieve a low coefficient of thermal expansion, providing long term structural integrity with low thermally-induced stresses. the external stratum is a standard seal layer of FRP that further protects the structural core from electrolyte splashes and spills. Optionally, this external seal may be specified with multi-layered oriented fiber reinforcements to guarantee trouble-free operation in unusually extreme operating environments.
We are Shengshi Wireless Charging technology (Foshan, China) Co., Ltd. We are a manufacturing factory of hidden wireless chargers for furniture and Consumer electronics. The brand of our products is ZeePower. A new stable long-distance wireless charger designed to charge the mobile device through desks, tabletops, and thick cases.No need to dig holes, no need to damage the design of the furniture surface. This charger can be perfectly mounted under any surface except metal. We use the 115-140mhz low-frequency magnetic resonance wireless charging technology to perfectly match the QI wireless charging standard. We have exceeded the QI standard limit to 45 mm. Our product shell is a high standard ABS, the transmitting coil is a double or single side pure copper coil, and the bottom of the coil is a ferrite with a magnetic permeability of 3000. Our core host chip and power management chip are both 20nm process, including the hardware program inside, which makes us the world's first mass-produced long-range wireless charger manufacturer.
Brand: ZeePower Company: Shengshi Wireless Charging Technology Advantages: hidden under the desktop to charge, no need to dig holes, do not damage the furniture design Product use scene: tea table, coffee table, office table, hot pot table, computer table, bedside table, cabinet case, shoe cabinet, smart furniture Wireless charging standard: Qi-BPP Input voltage / current: 19V / 2A Output voltage / current: 5V / 1A Effective charging distance: 20mm-45mm Effective charging :Ï?20mm Typical charging efficiency: 72%@25mm (IPHONE8P) The horizontal offset :plus or minus 10MM Working frequency: 115k-140kHz Protection function: FOD, OTP, OVP Support for charging devices: all QI wireless charging device Product Certification: FCC/CE/ROHS/EMC Coil type: long distance coil module
Model Number: HP100S Outdoor Power Brand Name: OEM Origin: China (mainland) Key Specifications/Special Features: DaWei HP100S offers the most affordable and lightweight portable power station that can charge from USB Type-C, USB, DC and AC outlet. Featured with rechargeable lithium-ion batteries providing 133 watt-hours of energy storage. Reliable portable power for multiple recharge of mainstream electronics and small appliances, perfect for hiking, camping, and outdoor photography. Capacity: 36,000mah/ 133Wh Battery: 3.7V Lithium-ion Rechargeable Cell battery Output AC power: 100W modify pure sine wave, 60Hz 120V DC Output: 2*DC output 5.5 12V/8A(MAX) 2*USB output QC3.0 5V/3.1A 9V/2A 1*USB Type C 5V/3.1A 9V/2A 12V/1.5A (Cable) AC Output: 110V-240V, VAC ± 5% LED display charging in/out, faulty DaWei HP100S offers the most affordable and lightweight portable power station that can charge from USB Type-C, USB, DC and AC outlet. Featured with rechargeable lithium-ion batteries providing 133 watt-hours of energy storage. Reliable portable power for multiple recharge of mainstream electronics and small appliances, perfect for hiking, camping, and outdoor photography. Capacity: 36,000mah/ 133Wh Battery: 3.7V Lithium-ion Rechargeable Cell battery Output AC power: 100W modify pure sine wave, 60Hz 120V DC Output: 2*DC output 5.5 12V/8A(MAX) 2*USB output QC3.0 5V/3.1A 9V/2A 1*USB Type C 5V/3.1A 9V/2A 12V/1.5A (Cable) AC Output: 110V-240V, VAC ± 5% LED display charging in/out, faulty Lighting: dipped lighting about 166 hours Output Frequency: 50/60 Hz ± 5% Adapter: 15V/2.4A Charging Mode: CC/CV Charging Time: about 6 hours Solar Panel Input: DC18V/2.5A Max Storage Time: 6 months Operating Temperature: -10~40°C Available Color: Black, Silver Packing Info Item Size: 16 x 15 x 7.5cm Item N.W.: 1.3kg 1pc in 1 gift box 4 boxes in 1 carton Gift Box Size: 25 x 19 x 9.5 mm G.W.: 1.5kg Carton: 51.3 x 40.2 x 25.5 cm G.W.: 10kg Package includes: Portable Power Station x 1 User Manual x 1 Wall Charger(15V/2.4A) x 1 USBA-USBC cable
Model Number: BP200 230Wh AC Power station Brand Name: OEM Origin: China (mainland) Key Specifications/Special Features: DaWei BP200 offers the most affordable and lightweight portable power station that can charge from USB Type-C, USB, DC, AC outlet and nice environment light. Featured with rechargeable lithium-ion batteries providing 230 watt-hours of energy storage. Reliable portable power for multiple recharge of mainstream electronics and small appliances, perfect for hiking, camping, and outdoor photography. Capacity: 62500mah/ 230Wh Battery: 3.7V Lithium-ion Rechargeable Cell battery Output AC power: 200W pure sine wave, 60Hz 120V DC Output: 2*DC output 5.5 12V/8A(MAX) 2*USB output: 5V/3.1A 1*USB output QC3.0 5V/3.1A 9V/2A 12V 1.5A 1*USB Type C 5V/3.1A 9V/2A 12V 1.5A LCD screen display: wattage in/out DaWei BP200 offers the most affordable and lightweight portable power station that can charge from USB Type-C, USB, DC, AC outlet and nice environment light. Featured with rechargeable lithium-ion batteries providing 230 watt-hours of energy storage. Reliable portable power for multiple recharge of mainstream electronics and small appliances, perfect for hiking, camping, and outdoor photography. Capacity: 62500mah/ 230Wh Battery: 3.7V Lithium-ion Rechargeable Cell battery Output AC power: 200W pure sine wave, 60Hz 120V DC Output: 2*DC output 5.5 12V/8A(MAX) 2*USB output: 5V/3.1A 1*USB output QC3.0 5V/3.1A 9V/2A 12V 1.5A 1*USB Type C 5V/3.1A 9V/2A 12V 1.5A LCD screen display: wattage in/out Light: environment light with changeable color AC Output: 110V-240V, VAC ± 5% Output Frequency: 50/60 Hz ± 5% Adapter: 15V/2.4A Charging Mode: CC/CV Charging Time: 6-7 hours Solar Panel Input: DC18V/2.5A Max Storage Time: 6 months Operating Temperature: -10~40°C Available Color: Blue, Silver Packing Info Item Size: 125 x 125 x 170mm Item N.W.: 2.6kg 1pc in 1 gift box 4 boxes in 1 carton Gift Box Size: 166 x 166 x 253 mm G.W.: 3kg Carton: 38 x 37 x 21 cm G.W.: 12kg Package includes: Portable Power Station x 1 User Manual x 1 Wall Charger(15V/2.4A) x 1
Key Specifications/Special Features: DaWei BP100 offers the most affordable and lightweight portable power station that can charge from USB-C, USB, DC, AC outlet. Featured with rechargeable lithium-ion batteries providing 148 watt-hours of energy storage. Its technology and modern charging features perfect recharge of laptop mainstream electronics and small appliances. Capacity: 40,000mah/ 148Wh Battery: 3.7V Lithium-ion Rechargeable Cell battery Output AC power: 100W modify pure sine wave, 60Hz 120V DC Output: 2*USB output: 5V/3.1A 1*USB output QC3.0 5V/3.1A 9V/2A 12V 1.5A 1*USB Type C PD45W LCD screen display: wattage in/out DaWei BP100 offers the most affordable and lightweight portable power station that can charge from USB-C, USB, DC, AC outlet. Featured with rechargeable lithium-ion batteries providing 148 watt-hours of energy storage. Its technology and modern charging features perfect recharge of laptop mainstream electronics and small appliances. Capacity: 40,000mah/ 148Wh Battery: 3.7V Lithium-ion Rechargeable Cell battery Output AC power: 100W modify pure sine wave, 60Hz 120V DC Output: 2*USB output: 5V/3.1A 1*USB output QC3.0 5V/3.1A 9V/2A 12V 1.5A 1*USB Type C PD45W LCD screen display: wattage in/out Input: TYPE C PD45W Charging Time: about 4 hours Solar Panel Input: DC18V/2.5A Max Storage Time: 6 months Operating Temperature: -10~40°C Available Color: Black, Silver Packing Info Item Size: 189 x 129 x 45mm Item N.W.: 1.3kg 1pc in 1 gift box 4 boxes in 1 carton Gift Box Size: 166 x 166 x 253 mm G.W.: 1.5kg Carton: 38 x 37 x 21 cm G.W.: 10kg Package includes: Portable Power Station x 1 User Manual x 1 USB-C cable
Item Value Model No GLC-6S Light source one main light two auxiliary lights Rated voltage 3.7V Main light current 400mA - 530mA - 1000mA Power of main light 2.96W Illuminous 385lum Brightness 9000lux - 14000lux - 18000lux Battery Capacity 6.8Ah Battery cycles 1200 Working time 17hrs - 13hrs - 6hrs Weight 245g Water-proof grade IP68 Protection grade Ex ia
DELL PRO2X DOCKING STATIONS NO WIRES AVAILABLE QUANTITY 80 EA.
[QI WIRELESS CHARGING]: No need to bother with cords or plug into the wall; just slip your wireless headset charging case into wireless headset case cover/skin and lay on a Qi wireless charging pad/mat to completely powered and keep your earbuds fully charged. [FULL COMPATIBILITY]: Compatible with all Qi standard wireless charging pad/mat.wireless headset charging case perfectly fits into wireless charging case cover. [EASY OPERATION]: Install and remove at ease. Simply put wireless headset charging case into the wireless charging case cover, lay it on a Qi charging pad/mat with its Bluetooth button facing upwards for a fast and efficient charge. [BEST PROTECTION]: Durable rubber coated hard shell protects wireless headset charging case from dust, scratches, accidental drops; overheating and overcharging protection also featured [WHAT'S IN THE BOX]: 1 x Qi wireless charging wireless headset case cover/skin, 1 x User Manual. *Note: wireless headset and its charging case are NOT included in the kit. Specifications Model: LA-008 Input: 5v/1.5a Output: 5v/700ma-800ma Material: PC Size: 55*65*29.5mm Color: Black/White/Red/Green
ZHUOJUN redispersible polymer powders are manufactured by spray drying macromolecular copolymer dispersions under carefully defined conditions. They are mainly used improve cohesion, adhesion and flexibility in constructions especially in drymix mortar. Composition: Polymer Resin It is the main ingredient of dispersion particle and a key part for redispersible polymer powders to come into play. Additives (interior) It plays a role of modified resin with polymer resin. Protective Colloid A layer of hydrophilic material will be coated on the surface of the redispersible polymer powder. The protective colloid of most redispersible polymer powder is polyvinyl alcohol. Additives (exterior) The anti-caking agents and super-fined mineral additives are incorporated to make sure that powder properties are maintained during storage and processing.
1) 5 Ports charger station+ wireless charger: 2) Material: ABS+PC refractory material 3)USB portï¼?5 USB+1 wireless charger , two in one 4) Input parameterï¼?~100-240V, 50/60Hz(Wide voltage broadband, global application) 5) Total parameterï¼?DC5Vï¼?7A Total 6) Wireless charging powerï¼?5W 7)Rated powerï¼? 35W 8) Charging rateï¼?no less than 85%ï¼?High conversion rate, small heat, similar product 9) charging rate usually less than 80% 10) With EMC, EMI anti-electromagnetic interference module: avoid interference 11) phenomenon when charging. 12) Overcurrent protection: ensure safe and reliable charging 13) Smart ID chip: compatible with all ios, android and other USB charging devices. Adopt ETL certified power cord, produced by professional factory. 14) warranty: one year (free replenishment if quality problem occurs within one year).This product has passed QI, CE, Rohs certification and ilac ul60950-1 certification test 15) Colorï¼?Black/ white
* 5 Ports charger station+ wireless charger. * Material: ABS+PC refractory material. * USB portï¼?6 portsï¼?It can charge 6 devices at the same time. *Input parameterï¼?~100-240V, 50/60Hz(Wide voltage broadband, global application). * Total parameterï¼?DC5Vï¼?7A Total. * Wireless charging powerï¼?5W. * Rated powerï¼? 40W. * Charging rateï¼?no less than 85%ï¼?High conversion rate, small heat, similar product charging rate usually less than 80%. * With EMC, EMI anti-electromagnetic interference module: avoid interference phenomenon when charging. * Overcurrent protection: ensure safe and reliable charging. * Smart ID chip: compatible with all ios, android and other USB charging devices. Adopt ETL certified power cord, produced by professional factory. * Warranty: one year (free replenishment if quality problem occurs within one year).This product has passed QI, CE. Rohs certification and ilac ul60950-1 certification test. * Colorï¼?Black/ white.
12V 7AH, 2.35KG,151*65*97mm High Corrosion Resistant Performance: Pb-Ca multi-alloy grid High Energy Density and Power Density Excellent Charge Acceptance Ability Strong High and Low Temperature Performance Optimized Capability of instant High-current Discharging Low self-discharge rate Excellent Deep Discharge Cycle Life The Designed Life is 5 Years
Characteristic of 2200mAh Li-ion cylindrical battery Without special instructions, the following tests should be done under the condition of : temperature(23±3), atmospheric pressure (86KPaï½?106KPa), relative humidity (45%ï½?85%), and the tests should be done within two weeks after receiving the products. the definitions of some nomenclatures of this specification standard Charge: Charge with current 0.2C5A to limit charge voltage under the condition of23±3 surrounding temperature, then change to charge with constant voltage till the current less than or equal to 0.02C5A. Electrical Characteristic for Cylindrical Rechargeable Electric vehicle li-ion Battery NO. Item Standard Test Method 1 Discharge rate capabilities Aï¼?1 C5A â?¥97% Bï¼?5 C5A â?¥95% Standard charged under the condition of normal atmospheric pressure and the environmental temperature of 23±3 and45%ï½?85%RH, then rest for 30mins and discharge at1C5Aã??5 C5Aã??10 C5A to the discharge cut-off voltage respectively. Charge/discharge cycle can be conducted for 3times before meeting the Standardsï¼?the same belowï¼? 2 capacity retention and recovery Residualcapacityâ?¥94 % Recoverablecapacityâ?¥*98% Standard charged under the condition of normal atmospheric pressure and the environmental temperature of 23±3ï¼? Stored for 28 days, then discharge at 0.2 C5A to 2.50Vmeasuring residual capacity; Then standard charge/discharge measure recoverable capacity. 3 Low TemperaturePerformance discharge capacityâ?¥85% rated capacityno distortion and no rupture The cell shall be charged in accordance with the standard charge. Then stored in the temperature of -10±1 for4h, Discharge at the constant current of 0.2C5A down to the end-of-discharge voltage 2.750V. 4 Cycle Life Charge: The cell shall be charged in accordance with RapidCharge condition. rest for 10mins.Discharge : 5C5A discharge to 2.75V, one cycle is finished, then rest for 30mins. Then repeat above steps, when capacity is less than 80% of initial capacity, the battery life is over.
Warnings and Cautions in Using the Long life rechargeable lithium battery To prevent a possibility of the battery from leaking, heating or explosion please observe the following precautions: When using a new battery for the first time or after long term storage, please use the battery charger specifically for that purpose fully charge the battery before use. Do not disassemble or open, crush, bend or deform, puncture, or shred; Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids such as water, seawater, drinks such as soft drinks, juices, coffee or others, or expose to fire, explosion, or other hazard. Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals. Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. The battery replacement shall be done only by either cells supplier or device supplier and never be done by the user. Replace the battery only with another battery that has been qualified with the system per standard. Use of an unqualified battery may present a risk of fire, explosion, leakage, or other hazard. Don't keep a battery at rest for a long time (over 6 months). Safety accident may happen when recharging battery which has a rest for a long time. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with large amounts of water and seek medical advice. Battery usage by children should be supervised. Seek medical advice immediately if a battery has been swallowed Never disassemble cells. The disassembling may generate internal short circuit in the cell, which may cause firing or other problems. Never incinerate nor dispose the cells in fire. These may cause firing of the cells, which is very dangerous and is prohibited. Do not remove the outer sleeve from a battery pack nor cut into its housing. Do not mix our batteries with other battery brands or batteries of a different chemistry such as alkaline and zinc carbon. Do not mix new batteries in use with semi-used batteries, over-discharge may occur. Promptly dispose of used batteries in accordance with local regulations.
Characteristic of Long life 18650 battery a.Environmental conditions Unless otherwise specified, all tests stated in this specification are conducted at temperature 23±3°and humidity under 65%. b. Measuring equipment (1) Amp-meter and volt-meter The amp-meter and volt-meter should have an accuracy of the grade 0.5mA and mV or higher. (3)Slide caliper The slide caliper should have 0.01 mm scale. (4)Impedance meter The impedance meter with AC 1kHz should be used. c. Standard charge charging the cell CCCV with charge current 0.5C, constant voltage 4.2V and 150mA cut-off in CV mode at 23 for capacity. d. Standard discharge capacity discharge current of 600mA(0.2C) with 2.5V cut-off at 23within 1hour after the standard charge.
