There are products made of polyamide multifilament(thread)polyester yarnpolypropylene filamentpolypropyleneand polyethylene with sizes from 30 mm-155 mmimported foreign technological equipments to produce 12-plyropeit has domestic ieading technoiogyscientific structurereasonable processing and can obviously rise up strength ot ropeenhance wearing resistancereduce eiongationas well as advantages of smooth flexible and easy operation. It is a hightech product of our company
The product is mainly used in shipbuildingocean transportationmarine drilling national defense and military industryharbor and dockocean petroleum etc
Specification
Polyamide multi-filament
Polyamide
Polypropylene fibre
Polypropylene monofilanment
Polyester
1. Hunting vest - bright orange in color, with small blinking lights going down the front on both sides of the 2" safety stripe. Lights blink oin and off and operates off 2-aa batteries with a small compartment for the batteries on the inside of the vest. Vest can be used for all types of hunting, and other sporting activities. Comes in one size fits all.
2. Safety vest comes in white mesh with 2" bright yellow stripes down the front on both sides with blinking lights. Lights blink on/off and can be seen at a far distance. Uses 2 -aa batteries and are kept in a case on the inside of the vest. One size fits all. Can be used for all safety activities, such as construction areas, zones, mining shafts, work sites, can be used for night time working zones, highway crews da/night, fishing, boating, skiing, hunting, etc. Can be helpful and safe.
This inflatable lifejacket is designed and produced according to en396/a1:1998 and relative requirements of msc.81(70).It consists of one air chamber made of tpu nylon composite material, auto inflation device, co2 cylinder and oral tube.In emergent situation when falling into water, it can be inflated by the auto inflation device with five seconds or by manually pulling the toggle so as to ensure safety of the drowning people.It has the advantages of small size, light weight, comfort, easy use and it is suitable for offshore operation and personal protective device, type zhgqyt-0511 and type zhgqyt-0521 are ce approved by germanischer llyod ag .
Weight <=1kg, buoyance>=150n, inflation time<=5s, ambient temperature for use:-30c--65c
356 Marine Safety Products Suppliers
Short on time? Let Marine Safety Products sellers contact you.
Main Parts
Motor: Permanent Magnetic Synchronous DC Motor
Controller: Frequency Conversion Controller
Frame & Shaft: 304# Stainless steel
Float: HDPE
Impeller: PPR
Gear Box: / (No Gear Box)
Technical Parameters
Item No.: SLS-2
PCS of Paddles: 6
PCS of Floats: 3
Power (KW): 2.0
Voltage (V): 380
Oxygen-enrich Capacity (kg/hr) : 3.02
Paddle Diameter (cm): 64
Floating Fender
Floating Fender has been used for almost 50 years, it's also called marine rubber fender or YOKOHAMA fenders. It is the leading anticollision device for marine application in the world. Floating Fender is used as a protective medium for ship to ship contact, ship to quay,and ship-to-berthing. Floating fenders are a type of marine equipments that are used to prevent boats, ships and other naval vessels from colliding against each other or against docks, wharves and piers. In other words ship fenders can be simply termed as a marine bumper.
LCT use shipside marine balloon fender for STS
Why Choose Florescence
Florescence is a trusted supplier for shipyard, quay, harbors in the global market. Our factory in Shandong Province has been established for over 20 years. FLORESCENCE Floating Rubber Fenders are sent to lots of countries, including Indonesia, Singapore, America, Russia, etc. Products are certificated by CCS, ISO, ABS, BV, etc. It can be manufactured in different kinds of sizes and types according to the customers' requirements.
Our floating fender business has recently opened the door to the Floating LNG market, one of the most challenging applications in the offshore industry. Several 3.3*6.5m size fenders will be used in between the largest floating production facility in the world and LNG carrier during the side-by-side operation. Florescence is currently in the process of developing larger size fender and advanced monitoring system to better serve our customer needs.
Floating Fender
Floating Fender has been used for almost 50 years, it's also called marine rubber fender or YOKOHAMA fenders. It is the leading anticollision device for marine application in the world. Floating Fender is used as a protective medium for ship to ship contact, ship to quay,and ship-to-berthing. Floating fenders are a type of marine equipments that are used to prevent boats, ships and other naval vessels from colliding against each other or against docks, wharves and piers. In other words ship fenders can be simply termed as a marine bumper.
LCT use shipside marine balloon fender for STS
Why Choose Florescence
Florescence is a trusted supplier for shipyard, quay, harbors in the global market. Our factory in Shandong Province has been established for over 20 years. FLORESCENCE Floating Rubber Fenders are sent to lots of countries, including Indonesia, Singapore, America, Russia, etc. Products are certificated by CCS, ISO, ABS, BV, etc. It can be manufactured in different kinds of sizes and types according to the customers' requirements.
Our floating fender business has recently opened the door to the Floating LNG market, one of the most challenging applications in the offshore industry. Several 3.3*6.5m size fenders will be used in between the largest floating production facility in the world and LNG carrier during the side-by-side operation. Florescence is currently in the process of developing larger size fender and advanced monitoring system to better serve our customer needs.
Type
Technical specificationsDfyd-l-aDfyd-l-b
Luminous intensityy0.75cdy0.75cdy0.75cd
Time of powery8hy8hy8h
Operation voltage2.9v6.0v3.6v
Stowage environment temperature-30+65-30+65-30+65
Water-activated temperature-1+30-1+30-1+30
Lighting formEver brightFlashingFlashing
Flash frequency
5070times/min5070times/min
Color of lightWhiteWhiteWhite
Weight(including battery)¨¹128g¨¹156 g¨¹150 g
With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts.
The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors.
Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.
With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts.
The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors.
Zeniths quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.
With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts.
The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors.
Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.
With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts.
The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors.
Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.
With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts.
The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors.
Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.
356 Marine Safety Products Suppliers
Short on time? Let Marine Safety Products sellers contact you.
