Petroleum By Products..
Oil products.
Fuel.Export
Light liquid paraffin Sn-60 Test description Unit Test method Specification Result Density @30 c Kg/hr. Astm d 1298 Report 0.8213 Kinematic viscosity @40 oc Cst Astm d 445 8.0-10.0 8.58 Kinematic viscosity @100 oc Cst Astm d 445 Report 2.833 Viscosity index - Astm d 2270 95 min. 96 Flash point (coc) Oc Astm d 92 150 min. 158 Color (astm) - Astm d 1500 1.0 max. Lo.5 Appearance - Visual B & c B & c Pour point Oc Astm d 97 -25 max. -40 Ca (aromatic carbons) % Astm d 2140 Report Lo.1 Cn (naphtenic carbons) % Astm d 2140 Report 20 Cp (paraffnic carbons) % Astm d 2140 Report 80 Water content Crackles/% Ckt/distillation Nil Nil/nil Light liquid paraffin Sn-60 Test description Unit Test method Specification Result Density @30 c - Astm d 1298 Report 0.83 Kinematic viscosity @40 oc Cst Astm d 445 17~19 18.24 Kinematic viscosity @100 oc Cst Astm d 445 Report 3.82 Viscosity index - Astm d 2270 95 min. 104 Flash point (coc) Oc Astm d 92 180 min. 190 Color (astm) - Astm d 1500 1.0 max. Lo.5 Appearance - Visual B & c B & c Pour point Oc Astm d 97 -21 max. -30 Ca (aromatic carbons) % Astm d 2140 Report 1 Cn (naphtenic carbons) % Astm d 2140 Report 32 Cp (paraffnic carbons) % Astm d 2140 Report 67 Water content Crackles/% Ckt/distillation Nil Nil Light liquid paraffin Sn-150 Test description Unit Test method Specification Result Density @30 c - Astm d 1298 Report 0.8548 Kinematic viscosity @40 oc Cst Astm d 445 24~28 26.5 Kinematic viscosity @100 oc Cst Astm d 445 Report 5.088 Viscosity index - Astm d 2270 Min. 95 108 Flash point (coc) Oc Astm d 92 Min. 210 224 Color (astm) - Astm d 1500 1.0 max. Lo.5 Appearance - Visual B & c B & c Pour point Oc Astm d 97 Max. -12 -18 Ca (aromatic carbons) % Astm d 3238 Report Lo.1 Cn (naphtenic carbons) % Astm d 3238 Report 31.8 Cp (paraffnic carbons) % Astm d 3238 Report 68.2 Water content Crackles/% Ckt/distillation Nil Nil 180/175 plastic drum new/used
This oil (also known as heavy oil, marine fuel or furnace oil) is a fraction obtained from petroleum distillation, either as a distillate or a residue. In general terms, fuel oil is any liquid fuel that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 42 °C (108 °F) and oils burned in cotton or wool-wick burners. Fuel oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes, and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, i.e., heavier than gasoline and naphtha.
We have Carbon Black produced from the production of Tire oil about 5 M.Ton per day . We are engaged in the business of exporting and supplying excellent quality Carbon Black Powder . We make available Carbon Black in safe packaging and at the most competitive rates. Also, we ensure on-time delivery of the orders due to our fast transit modes. Interested buyers
We introduce the new concept that has excellent features will be fit for building construction, building reinforcement, retrofitting and strengthening old structure. UD (Unidirectional) Carbon fiber fabric which is carbon reinforcement that non-woven and features all fibres running in a single, parallel direction. It provides ultimate strength in the direction of the fiber grains. UD carbon fabric 200g, 300g, 600gsm at width from 10cm-100cm. The main property of UD carbon fiber are below: 1. Light weight, easy to construct, and little increasing the weight on constructed based materials. 2. Soft, free to cut, is suitable for a variety of shapes structures, and have close adhesion with reinforced concrete surface. 3. The thickness is small, so it is easy to overlap. 4. High tensile strength, high flexibility, and have the same effect as to use steel plate reinforcement. 5. Anti-acid and alkali, corrosion resistance, and can be used in any harsh environment. 6. Fabric with Epoxy widely used in water conservancy, water proofing and fire proofing solution. 7. The supporting epoxy resin impregnated adhesive (recommended our company matching epoxy adhesive) have good permeability, the construction is simple and time required is short. 8. Non-toxic, non-irritating odour, living still in construction. 9. Carbon fiber sheet has high tensile strength, which is equivalent 10 - 15 times to ordinary steel. UD Carbon fiber fabric can be mainly applicable in below areas: Building reinforcement, renovation, Fireproofing, waterproofing solution and any other civil construction and retrofitting works.
Carbon Fiber Plate for Reinforcement. We choose the good quality 12K carbon filament, which steadily ensures the plate with high tensile strength and modulus all the time. The tensile strength can reach 2400MPa, tensile modulus can reach 160GPa. Now wrap system is very popular all over the world, because itâ??s obvious strengthening to the structure and easy operation, less time and cost on construction. Besides, our plate has its own advantage compared to other manufacturer, it surface is without release agent that can result in much better bonding with the concrete. Carbon Plate 1.2mm, 1.4mm, 2mm & 3mm thick, 5cm, 10cm, 20cm wide. Carbon Fiber Plate can be applicable in below area: 1. The remedy repair and strengthening of the plate and beam of concrete structures 2. The strengthening of the openings around the wall and plate 3. The strengthening of beams of wooden buildings etc.
For pure rubber carbon black. we use raw tyre and steam it on 600-650 c temperature . This carbon test in lab after steam for better carbon black result and than we make 25 kg package for supply
For pure rubber carbon black. we use raw tyre and steam it on 600-650 c temperature . This carbon test in lab after steam for better carbon black result and than we make 25 kg package for supply
Item : Jute Stick Carbon Purity : 99% Ash : 6% maximum Carbon content : 78% Moisture content : 7% maximum Origin : Bangladesh Use : To produce Fire Crackers & Battery
carbon anode blocks, Carbon Anode Scrap : Fixed Carbon : 98% min Size : 100 - 300mm Sulfur : 0.6% - 2.5% max Ash : 1% max Moisture :1%max Color : Black
Dear sir Greetings to your esteemed company.. We have a direct Refinery/ mandate from Kazakhstan in QATAR and RUSSIA to export petroleum products to any part of the world. We are ready to deliver your purchase order to any safe world port on CIF and FOB transaction terms. We supply: Aviation Jet Fuel A1, LIGHT CRUDE OIL, Low Sulfur Diesel EN590 Diesel D2, Gasoline, Automotive Gas Oil (AGO), Liquefied Natural Gas (LNG), Liquefied Petroleum Gas (LPG), Virgin Fuel Oil D6, EN590, Petroleum Coke. Coal Carbon If you are in need of our product, give me a feedback so we can send our soft offer with seller working procedure for your review
Saleing Crude oil and,disel, carbon from plastic
Product: Jet fuel (A1) (JP54) Origin: Kazakhstan Quantity: Minimum 1,000,000 BBL spots / Maximum 5,000,000 BBL per month Payment Terms: MT103/23/ TT wire transfer Loading Ports: ROTTERDAM/HOUSTON
Jet -A1 aviation Fuel; our soft offer price FOB is $103.5 per barrel. Origin: Kazaksthan . Stander Quality and Grade. Minimum 350,000 barrel Maximum 2,000,000 barrel Trial. Price fixed:$103.50 per barrel. packing:Bulk Payment:T/T &MT103 port:FOB Rotterdam. Commission:$ 2.00 per Barrel
Dear sir. we would like to sell Carbon black from our own factory. Our products from crumb rubber oil factory. please contact with us for details.
Tire pyrolysis carbon black, pyrolysis oil.
We are professional in supplying 1. Wood, bamboo, coconut, rice husk charcoal, and organic carbon powder.
We can supply crude oil, Fuel oil, Mazut M100 Gost 10585-75/99 Mazut 310/300, Diesel, JP54, LPG, LNG, CNG, Urea. As per slandered
