Chromaline - U.S.A For Plastisol inks Discription : Photoemulsion intended for use with plastisol inks only. This high-quality, yet economical emulsion reaches exposure speeds of many dual cure systems. Its high viscosity won't sag in low mesh counts yet Its rheology behavior Allows high stencil Buildup with minimal coatings. Colour : Violet Packing : 900gms+2.8gms Diazo / 3600gms+11.2gms Diazo Solid Content : 44% Std Packing : 9/18 units (for 900gms) Std Packing : 9/18 units (for 3.6gms)
Shebro - India A biodegradable and non-abrasive emulsion Discription : A biodegradable and non-abrasive emulsion treatement that creates a permanent stencil. improves stencil durability. Suitable for nylon/polyester/steel mesh. Colour : Clear Packing : Set of 1800gms Std Packing : 12 set (for 1800gms)
Water proffing for protect Starch Bonding. Packex CR-20 is a thermosetting ketone aldehyde starch based corrugating adhensive. It features a specific blend of proprietary corrugator performance enhancing ingredients
* substitute of 'LOCTITE 401' * EU RoHS compliant product * Non-solvent : Does not contain organic solvents and does not cause hallucinatory effects. Suitable for use in various work environments. * Cures at room temperature (20C to 30C) and does not require special curing equipment. * Fast curing that bonds in seconds. Reduces job completion time and facilitates automatic production lines. * Transparent and low odor. Works well with any use and material to give a clean finish. * Viscosity (cps) : 90~110 / Tensil-Shear Strength : Above 180 / Initial Cure Speed : 3~5 / Working Temperature : -54~82C
The heating apply one-part adhesive and sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings and various appliances.
one-part sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings, color steel plate, roof sealing and various appliances.
carton box and packaging adhesive
SPECIFICATION:90mm*5mm*5mm PACKAGING TERMS: 1000PCS/BAG
Hot melt glue for book binding Paper weight: 60-120gram HM8030 120-157gram HM8030W ï¼?157 gram HM 8216 It's designed for use in bookbinding side gluing for meidum to high speed perfect binding line or standalone rotary binder, it is formulated with good adhesion and thermal stability, long open time and good flow property, light clear yellowish abd is suitable for bonding printed, varnished or BOPP laminated paper.
Epoxies E-purge (epoxy powder for purging) Epoxy curing agent 87 Epoxy resin (for mfg powder coatings) $.66/lb. Waterborne epoxy dispersion -$.77/lb. Ortho creosol resin-$.88/lb. Ketimine curing agent $.90/lb. Epoxy resin (40% solids in mek) $.85/lb.
Emulsions-adhesives Polyvinylacetate Sbr Eva Many varieties of solids contents and viscosities.
Amines Adma 12 Jeffamine 900 Rapi-cure (see uv inhibitor under new items)
RAPPORT RP-6210 Hybrid Sealant is based on the hybrid silicone polymer one-component adhesive. It react with moisture in the air, and gradually formed a kind of high strength of the elastomer. RAPPORT RP-6210 Hybrid Sealant is a universal sealant, with higher adhesion property and better elastic recovery rate. It is suitable for all kinds of porosity and porous material. RAPPORT RP-6210 Hybrid Sealant Sealant has good adhesion, and has significant characteristics in coating the paint. Features: One component, easy to use Excellent adhesive performance Odorless, non-corrosive Excelent flexible Water resistant Widely use Paintable Technical Data: As Supplied tested at 23�2, RH50%�5%: Aspect:Thixotropic Paste Odor:Low odor Specific Gravity:1.5 Skinning Time, min:20 105 heat loss%:1.7 Application Temperature, :+5 to +45 Service Temperature-40 to +80 As Cured tested at 232, RH50%5% : Movement Capability Level, %20 Hardness Shore A.7d:55 Adhesion Propertiesnon-destruction Tensile modulus(MAX), MPa1.5 Elongation at break, %350 Typical Application: Suitable for various substrate seam sealing, including stainless steel, sheet, copper, wood, coating, etc, with the function of waterproof anti-corrosion sealing seal inside and outside. Suitable for is suitable for sealing, seam sealing, simple bonding as well as for vibration reduction and sound dampening measures in collision repair and vehicle body construction. Suitable for the interface of anticorrosion seal in areas of rivet, bolt, hinge, weld. Suitable for all kinds of anti-water sealing of the gaps of metal structure, fume hood, houses built. Instructions for Use: APPLICATION TEMPERATURE: +5 to +45 1. Cleanse with a cleaning agent, to keep the substrate surfaces completely cleanJOIN LEADER also provide the cleaning agent for your convenience 2. Use the sealant after cleaning agent dries, around 1~2mins later. You can use two different cloth, one for cleaning agent, and the other for sealant. Notice that the two cant be mixed use together, and the second cloth will be better purified cotton and no picking. 3. For better appearance, cover outside of joint areas with masking taps before application. 4. Cut nozzle to desired size and extrude sealant to joint areas. Tool immediately after sealant application, make it smooth and remove masking tape before sealant skins. Color: White, Grey, etc. Other Color Available Package: Cartridges: 250mL, 300mL, Sausage: 300mL, 600mL Different Packing Available
RP-1501 Neutral Transparent Silicone Sealant is based on the hybrid silicone polymer one-component adhesive. It react with moisture in the air, and gradually formed a kind of high strength of the elastomer. Features: Easy to use, fast drying, no drooping, good transparency; good elasticity and bonding properties, used in a wide range of climatic conditions, excellent weather resistance; Medium modulus, high elongation, high elasticity, can be used for general bonding and sealing. Technical Data: Tested at 23±2, RH50%±5%: Specific Gravity: 0.9~0.95 Skinning Time: 20m Operating Temperature: +5 to +45 Tolerance Temperature: ï¼? -40 to +100 Hardness( Shore A): â?§18 Tensile Strength: â?§0.6 MPa Elongation at break: â?§300 % Glass bond damage area: â?¦25% volatile component: â?¦35% Typical Application: Wide range of bonding, excellent adhesion to most building materials such as glass, aluminum, oil-free wood. The back of the wooden line, the gap between the sanitary ware, the toilet, the sink and the walls, etc.; Automotive and machinery industries, providing instant formed leak-proof pads for gearboxes, compressors, and pumps. Instructions for Use: Please follow the steps below to apply the sealant. Cleaning and drying of the coating base Laying support and anti-adhesive materials Sticking textured paper Injecting sealant Using a scraper to scrape off excess glue Removing the texture paper and cleaning the seams around Checking and confirming Color: Transparent (other colors adjustable, such as white, gray, black) Package: Cartridges: 300mL, Sausage: 300mL, 600mL Safe Notes: The product will release small molecules during the solidifying process and the workplace should be well ventilated. Avoid direct contact with the skin and eyes; once touched to the skin, dry it with a dry cloth and rinse it with water;when reaches eyes, rinse with plenty of water for more than 15 minutes. If the symptoms cannot be relieved, seek medical attention. The product is completely safe without any toxic or accessory properties when totally solidified.. Keep out of reach of children. do not swallow.
Exsan Long Life Tire Puncture Sealant - Available in all types of Plastic and Metal packaging with desired shape, size, material weight, design and brand name as per consignee's desire.
Packex- AC is an organic compound that offers a wide range of 3D bonding properties for polymer mixtures such as cellulose, starch, etc. under certain conditions. Thus, it improve the mechanical properties of polymers and enhances the quality of products that use these polymers Features: Adhensive increase/ Hardness increase/ Water resistance increase
Cyanoacrylate adhesive Cyanoacralate is an instant adhesive which bond in 2-3 seconds for plastic, wood, ceramic flex, etc. 20kg, 250 gm, 50 gm, 20 gm, 15 gm, 10 gm 2 gm, 0.5 gm.
General purpose lubricant silicone for all application. Produced by hi-tec German technology. 24 pieces in a carton.
MS 2000- Parts Elastic Sealant DESCRIPTION: MS2000 is an adhesive and sealant based on MS-polymers to provide a two –part, fast curing product. It has an outstanding bonding strength and prime less adhesion on various types of substrates. ADVANTAGES: Eco-friendly, Green, Healthy High efficiency, suitable for large-scale construction Less than 5% of the waste, saving costs Excellent weather resistance Outstanding Surface compatibility with paint systems No pollution to the substrate Excellent adhesion No pollution to the substrate Low modulus, high elongation, suitable for large displacement seams APPLICATION: Joint sealing for PCA board Joint sealing for metal wall hanging Joint sealing for concrete products Sealing Around the window frames. NOTICE: Not applied to GLASS After the two-component mixing the gel time of 3 hours, the need for construction at this time Must comply with the primer, otherwise no adhesion TEST RESULT: Item Results GB/T22083-2008 F-25LM Elastic recovery% 90 Tensile Modulus 23 0.2 - 20 0.3 Tensile properties NO DEMAGE Adhesion/cohesion properties at variable temperatures NO DEMAGE Adhesion/cohesion properties at constant temperature NO DEMAGE Extension after immersion in water NO DEMAGE Volume Loss(%) 2 Liquidity/MM 0 SPECIFICATION: Properties Parameter Appearance White paste, all colors Ratio=main agent: harder: color paste 100:10:5 Shelf life(under 25) 6 months Density(g/cm3) 1.1 Operation time 5 5 23 2/4/6 35 2( summer Package 4L
1.Excellent dielectric property 2.Excellent water and oxidative resistant performance 3.Operating temperature range (-50C to 27;C) 4.Adhere well to metal, ceramic, rubber and other isolation materials 5.Excellent corona resistance 6.Non-poisonous and low volatile PROPERTY STANDARD VALUE Color Visual inspection Transparent/Light grey Density 25C, g/cm3 1.0 Penetration (Static) mm/10 250 Penetration (Dynamic) mm/10 350 Max Oil Bleed 24hours, 27;C 12% Max Volatility 24hours, 27;C 2% Max Volume resistance 27;C, ohm-cm61;¨¢1012 Dielectric constant MHz 2.9 Power factor 100Hz -10MHz 0.0025 dielectric strength 1.25mm gap, kV/mm 19.5 1 KG/Bucket, 25 KG/Bucket, 200KG/ Bucket.
