Home Appliances, Electrical Equipment, Food, Machinery, Construction Materials, Construction Materials, Plastic Products.
.Ship, repair, equipment overhaul, inspections
SVEZA Deck 350 is a special film faced plywood with a grid pattern intended for slab formwork. It comes with 25, 50, and 100 mm grid patterns. These types of lines simplify plywood marking and cutting, as well as rebar placement. This allows to reduce labor costs at the construction site. Production process of plywood with layout grid is patented.* SVEZA Deck 350 is a high-strength plywood made of 100% birch veneer, all layeers are smooth, without cavities inside. Its edges are coated with special acrylate-based waterborne paint with low water permeability. SVEZA Deck 350 surface is smooth, and coated with wear resistant film (wearing capacity is 350 Taber test rotations). * Registered in the State Register of Utility Models RF 01.20.15, RF patent number 150519. Standard sizes: 1220 2440 8mm 1250x2500x18mm 1250x2500x21mm
Medical equipment , surgical mask, 3ply surgical mask, n95 mask, covid 19 rapid testing kit.soybean, maize, raw cashew, onion.Import, export, trade and brokerage
Gas equipments, gas meters, gas valves, gas governors, gas regulator, gas filters, gas odorizing systems.
Application Solvent Applications, Chemical Intermediates, Pharmaceuticals, Acetone Feature IPA is produced by the direct propylene hydration process. IPA meets the diverse needs from solvent industry. Our division has been a stable supplier of raw materials for related industries. IPA is used for cleaning semiconductor wafer and LCDs. This highly value-added product has been enjoying rapid increase in demand in accordance with the development of such areas as information, communication and multimedia. High Purity We have high performance purification process to manufacture high purity IPA products. Our IPA maintains superior quality characteristics through products of high purity.
Dear Sirs We are a producer of pure organic honey from Azerbaijan. Our farm is located in Saatli region where many different kinds of rare herbals such as liquorice, spear thistle and others grow in wild nature. The quality of the product tested several times at the laboratory of the ministry of agriculture and its result is fascinating. However, we are ready for any test of our from any part of the product. We are really interested in exporting our product. Because we think our product worth more than the price we sell in the local market.
Stable development of our country directly depends on competitive ability of domestic products, which, in its turn, depends on quality control (i.e. level of testing labs). Specificity of analytic labs requires special system of their competitiveness recognition. Their accreditation synthesizes general approaches to accreditation of testing labs and peculiarities of analytic operations. In relation with it the actual is application of international standards: 1.management system of lab quality and application of standards 2. Lab-information systems in quality management system 3. Modern analytic equipment and automatization of separate processes in lab activity. Karvan-L” company lab repeatedly passed accreditation in Azerbaijan State Committee of Attestation, accreditation certificate No. AZ 031.01.11.02.49.07 dated on 14.03.2007. Lab possesses modern equipment for conduction of wide range of analysis in oil chemistry and oil-chemical and organic synthesis, as well as of initial products of synthesis. Particularly, Karvan-L” company lab is fitted by up-to-date machinery for quality control of oily acids, and initial raw material for production of paintwork materials based on pentophtalein, acryl, vinilcetate, polyurethane and etc. film-making clay compositions, driers, initial components of alkyds, acryl, and polyurethane enamels and emulsions, water and oil soluble inhibitors of corrosion, deemulsifiers, additions to oils, oil solvents, aromatic carbohydrates, processed oils and paints, plant oils, sewage of analogical production.
Karvan-L company has developed new method and technology for production of semifinished pentaerythritol-modified phthalic and glyptic lacquer modified by petroleum acids and vegetable oils. Priming, varnishes, enamels and paints are manufactured on their basis. Materials were tested as per special assessment methodology of timber, metal coating protection ability, as well as coating systems for different aggressive environment. Lacquer materials are supplied with technical documentation, hygienic certificates confirming their designation and quality. We offer package delivery of semifinished varnishes and varnish based materials, consulting services, selection of schemes and their application with provision of all required features.
Quick details: Place of origin: baku, azerbaijan Item: chairs and tables Material: pe Color: optional colors or specify by clients Packaging & delivery: Depends on your order. Description: Tables and chairs folding, for adults and children are made of durable polypropylene. Lightweight, strong, compact, color, no sharp angles, and this is the main requirement of our youngest citizens. You they are simply necessary and indispensable for a picnic, fishing, to give, for any kind of tourism (even for this kind of tourism like kayaks! tested!), and generally any departure of the nature. Very easy to use. Add these chairs you can in any luggage compartment of your car without taking up a lot of space, due to the fact that the chairs are added. And if you do not have a car, you carry a chair too comfortable, because the chair has a comfortable handle. • The table (45 cm) can withstand a load of 140 kg. • Chair (45 cm) "high-grown" withstand a load of 90 kg. • Chair "small-child" (26.5 cm) can withstand a load of 60 kg. Large range of colors. Moreover, the chairs are made of moisture-resistant polypropylene.
Lubricating properties of low sulfuric diesel fuel with K-Lube additive at device HFRR under method EN ISO 12156-1 (data of JSC “VNII NP” Russia): At present production of highquality diesel fuels is impossible without attaching of additives of various functionality as depressor, cetane increasing, antismoke, washing, anti-oxidizing, dispersive, corrosion inhibitors, anti-wear and many oth. At preparation of multifunctional packets of additives their compatibility are to be considered, as the various surfaceactive substances are able to influence upon functional properties of each other. At usage of “K-Lube” anti-wear additive in packets with additives of other functionality (cetane increasing, depressor-dispersive and other) no contradiction between them emerges. Just the opposite, the “K-Lube” additive operated better than its foreign analogues /proved by following testing hold by JSC “VNII NP” Russia/: Taking into consideration results of mentioned above the “K-Lube” additive possesses high protective effectiveness against weariness and we would to mention that usage of additive at enterprises and petroleum refineries enables to save financial assets. Besides high effectiveness of “K-Lube” additive regarding protection from fuel pumps differing from foreign analogues the product has low pour point without adding any dissolvents (no more than 45 degrees below zero), what facilitates transportation, storage and usage it in cold climatic conditions.
Crude oil flowing from wells contain fair amount (often 20-30%, sometimes up to 60-65%) of water with dissolved salts from basis point up to 1-2%. This significantly increases viscosity of crude oil, generates stable emulsion and makes the oil inadequate for refining and transportation. Water produced together with oil is usually in very unusual state, i.e. it is spread in oil in the form of droplets (emulsified form). Less the size of droplets, more stable the emulsion. One of the main reasons of emulsion stability is also the presence of resin, pyrobitumen, paraffin, and other oil admixtures like glycerine, microcrystal of paraffin, ceresin in crude oil. These substances generate quite firm and thick (protective films) on the surface of water and solid particles thus preventing merging of water drops and solid particles and their spontaneous segregation from oil. At present physical, thermal, physico-chemical, electrical and combined methods of oil emulsion breaking are used for oil dehydration and oil desalting. One of the widelyused and most effective methods is physicochemical combined method using chemical reagents demulsifiers. Demulsifiers are substances with high surface activity. They are concentrated in interfacial areas of oil emulsion, break protective films covering solid particles, water droplets and neutralise their electric charges. After this, small droplets will merge into bigger drops under the influence of mutual attraction, loosen and segregated from oil.Oil demulsifying is carried out in oil field and oil refinery plants. At present “KARVAN-L” company tries to provide integrated work cycle: – development production supply and implementation of produced demulsifiers together with consumer. Demulsifier Karvan-200 is designed for oil dehydration and desalting in gathering system and oil treatment plant. Reagent can also inhibit corrosion processes.Demulsifier Karvan-201 is designed for separation of both light and heavy crude emulsion. This reagent is the composition of macroglycols and nitrogen-bearing surfactants in organic solvent environment Demulsifier discharge per 1 ton crude is 10-60gr. Dosage depends on emulsion stability, treatment temperature, water separation period and desired depth of oil processing. Optimum dosage and demulsifier application process ensuring necessary results can only be defined as per test results carried out in practical use sites.
uniforms, masks, shoes, helmets, kneepads, earmuffs, gloves, aprons, caps, traffic safety equipment, harness and lanyard, eyeglasses.
We are glad to offer you from our partner company: Product: Class A Food Grade (hot) & (cold) PET Flakes Origin: Bangladesh Prices Valid Till: 31st, January, 2022 FOB: COLD WASH Clear Pet Flakes $612.50USD per Ton Green Pet Flakes $562.50 USD Per Ton FOB: HOT WASH Clear Pet Flakes $712.50 USD per Ton Green Pet Flakes $662.50 USD Per Ton If the Buyer shares interest, We can bring forth the Seller. Before placing a trial order the Buyer is more than welcome to visit Sellers facilities for materials inspection. If you need any samples to test then the Seller can provide, the Buyer just needs to issue their DHL Account Number.
Excellent pine Wood Pellet Standard Ash amount: 0.7% max Moisture: 10% max Diameter: 6 mm-8mm Length: 10mm-40mm Made from pure wood , no bark Bright, uniform surface color No horizontal or vertical cracks Density: 650kg/m3 min calorific value: 4100 to 4600 kcal/kg Uniform size: quality in production Clear in water cup test Non Toxic Fumes Zero Additive Package: 15KG/PP woven bag or 25KG/PP bag or as per customers choice with desired logo. Shipping port is Batumi or Poti Georgia 400 $ FOB price Batumi or Poti port Georgia
- Color value of iodine mg. no more than - 2 DSTU 4568 - Acid value, KON mg. / g. no more than in a fresh squeezed oil - 0.12 DSTU 4350 - The mass fraction of phosphorus-like containing substances % based on stearoalimitsin - no DSTU 7082 based on P2O5 - no DSTU 7082 - Peroxide value 1.2 Ommol / kg. with the production release - 0.6 DSTU 4570 - The mass fraction of not fat impurities% - no DSTU 5063 - The mass fraction of the humidity and light materials% - 0.03 DSTU 4603 - Soap (quality test) - no DSTU 6048 - Useful substances, g per 100 g of a product- 99.95 - Energetic value (calories) per 100 g of product - 899kkal. (3761 kJ). - Transparency - transparent without sediment GOST 5472-50 - Taste and smell - odorless, mild taste of purified oil - GOST 5472-50 - Microtoxins content: Aflatoxin B1 mg / kg - 0,001 MU 4082 Zearalenone mg / kg - 0.10 MU 5177 - Pesticides content: Gentahlor mg / kg not found MU 2142-80 Parathion-methyl (metaphos) â?? not found MU 3222-85 - Radionuclides content: Cesium - 137 Bq / kg - 1.2+ _0,3 MB 6.6.1-10.10.1.7.158-08 Strontium -90. Bq / kg - 0.12 + _0,05 MB 6.6.1.10.10.1.7.158-08 - Toxic substances content: Mercury mg / kg - 0.0025 MBB 10.1-11505 Arsenic mg / kg - 0.06 GOST 26930 Copper mg / kg - 0.06 MBB 081-12 / 05 Lead mg / kg - 0.06 MBB 081-12 / 05  Cadmium mg / kg - 0.02 MBB 081-12 / 05 Zinc mg / kg - 2.43 MBB 081-12 / 04  Iron mg / kg - 0.62 GOST 26928 The oil is packed in 5-liter bottles, and four bottles in one package. Minimum batch of 254 containers (4800 bottles of 5 liters in one 40f. container). The maximum batch of 762 containers (4800 bottles of 5 liters in one 40f. container).
