Aviation Kerosene Colonial Grade 54 Jp 54 Jet Fuel A1 Product Description Aviation Kerosene Colonial Grade 54 Jp 54 Jet Fuel A1 Jet Fuel Is Designed For Use In Airplanes Powered By Gas Turbine Engines It Has A Clear To Straw Color Look The Most Regularly Used Fuels For Commercial Aviation Are Jet A And Jet A1 Which Are Manufactured To A Defined Worldwide Specification The Seller Will Issue The Necessary Documents As Agreed In The Delivery Procedure Contact Us In Order To Issue The Soft Offer To Your Company For Proceeding SELLER WORKING PROCEDURES TERMS AND CONDITION FOB PRICE US8000 85 PER Barrel Negotiable ORIGIN KAZAKHSTAN Key SpecificationsSpecial Features 2710192100 Jet A1 is the standard specification fuel used in the rest of the world Jet A1 has a flash point higher than 38 C 100 F with an auto ignition temperature of 210 C 410 F
Product Description Additives Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 Combustion properties Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min - max result test - ip method ASTM Composition. Available products: JET A1/JP54, CRUDE OIL, BLCO, REBCO, SLCO, D2, D6, BIODIESEL, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto.
CR03 Jet A1, EN590 FOB CI DIP Procedure Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan FOB CI DIP & PAY Transaction Procedure 1. Seller mandate issues SCO, buyer issues official ICPO including buyer company certificate and buyer international passport to the seller. 2. Seller Acknowledges Buyer ICPO and issues Commercial Invoice, Buyer signs and return back Commercial Invoice (CI) along with Tank Storage Agreement (TSA). 3. Seller provides Buyer with the Below Listed PPOP: a) Certificate Of Origin b) Dip Test Authorization (DTA) c) Injection Report (IR) 4. Buyer endorse DTA with his Tank Farm or Extend Seller Tank to enable Buyer receive full GPS coordinates of the tanks, Hub Numbers, Terminal Access Permit to dip test in Seller Tank and obtain fresh SGS Report. 5. After a successful Dip Test in Sellers tanks, Buyer takes over sellers tank or Seller injects into buyers vessel / Tank and the buyer makes the payment for the total value of the product injected into the tanks through the means of MT103-TT. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. The seller pays all Intermediaries involved in the transaction Transaction Procedure TTO/OPL/STS 1. Buyer accepts the seller's offer/Procedure, and Buyer will issue an ICPO, CP and Passport Copy. 2. The seller will issue MOU, Cargo Marine Insurance Bid Bond to Buyer for Securing the Vessel and Title Transfer ownership. All parties sign NCNDA/IMFPA. 3. Seller Issues: a) Bill of Lading b) Q88 c) CERTIFICATE OF ORIGIN d) CERTIFICATE OF QUALITY AND QUANTITY (Q&Q) at the Loading port. 4. Buyer pays 1% of the product amount for Cargo Marine Insurance Bid Bond to secure the Vessel and Transfer Title Ownership OR pays $195,000 for Authorization to Board the Vessel at the Destination port as the vessel arrive. Note: Buyer does not have the right to Dip Test the product they have not secured. 5. The seller will issue the following POP documents and order the re-routing of the vessel to the buyer's desired port and transfer the title to the potential buyer's company's name. a) Product Passport (Quantity & Quality Dip Test Analysis Report) b) Certificate of Origin c) Commitment to Supply d) Ullage Report e) Cargo Manifest f) Vessel Q88 g) Title Transfer Invoice h) Fresh SGS Report i) Injection Report 6. The vessel will arrive at the discharge port, and the buyer will carry out the CIQ/SGS inspection. Upon successful inspection, the buyer will make the full payment for the product to the seller through MT103 T/T.
CR02 Jet A1, EN590 CIF ESCROW PROCEDURE Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan CIF ESCROW PROCEDURE 1. Buyer issues LOI, seller issues FCO for buyer to sign and return with following below: a) Buyer official Irrevocable Corporate Purchase Order (ICPO). b) Buyer company certificate of business incorporation/ registration. c) Buyer Company comprehensive profile. d) Buyer�¢??s Copy of identification materials (international passport). 2. Seller issues SPA to buyer for review/countersign forward back to seller with acceptance letter, and seller issues Product Passport/Company Certificate and appoint Escrow Company in USA for both parties to sign Escrow agreement. Both parties pay consultation costs (1) to the attorney law firm before an escrow agreement can be drafted. 3. Seller and Buyer sign Escrow agreement and buyer makes 10% Escrow deposit of total value products for one shipment and Seller schedules shipment, ships out the cargo to the buyer destination port and sets of Full POP documents below to buyer/delivery documents send to buyer below; All party sign NCNDA/IMFPA. a) Certificate of Authenticity. b) Bill of Lading. c) Q88. d) Packing List Certificate. e) Export Clearance Permit. f) Insurance Policy. g) Commercial Invoice. h) Company registration certificate. i) Certificate of origin GOST. j) Passport of the Product. k) Commitment to Supply. l) Statement of Availability of the Product. m) Export clearance Affidavit. n) Registered, Legalized, Approved SPA. 4. Transaction certificate for 12 months which gives the BUYER the legitimate approval to purchase oil products from the Republic of Kazakhstan for yearly contracts. 5. The Buyer makes the product payment in full via MT-103/TT and Escrow company return 10% Escrow deposit to buyer. Seller transfers the Title Ownership to the Buyer Company and the Seller pay commissions to all involved via NCNDA/IMFPA.
CR01 Jet A1, EN590 Tank To Vessel Procedure Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan Tank To Vessel Procedure (TTV ROTTERDAM PORT) NOT NEGOTIABLE. 1. Buyer issues official ICPO including buyer company certificate and buyer international passport to the seller 2. Seller acknowledges Buyer ICPO and issues Commercial Invoice, Buyer signs and returns back Commercial Invoice (CI) along with, all parties sign NCNDA/IMFPA; a) Charter Party Agreement (CPA) b) Pipeline Injection Agreement (PIA) 3. Seller provides Buyer with the below listed PPOP: a) Certificate Of Origin (COO). b) Local Dip Test Analysis Result Report (Equivalent to SGS). c) Injection Report (IR). d) Tank To Vessel Injection Agreement (TTVIA) to be endorsed by Buyer Pipeline Company. 4. Buyer endorses TTVIA with his Pipeline Company or transfers Title to the buyer's name to facilitate physical verification and dip test of the product in seller tank before Injection into vessel. 5. After a successful Dip Test in Sellers tanks, Buyer Pipeline Company starts Injection into the Buyer Vessel or Seller injects into buyers vessel and the buyer makes the payment for the total value of the product injected into the Vessel through the means of MT103-TT. 6. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. 7. The seller pays all Intermediaries involved in the transaction and close the transaction. Transaction Procedure TTO/OPL/STS 1. Buyer accepts the seller's offer/Procedure, and Buyer will issue an ICPO, CP and Passport Copy. 2. The seller will issue MOU, Cargo Marine Insurance Bid Bond to Buyer for Securing the Vessel and Title Transfer ownership. All parties sign NCNDA/IMFPA. 3. Seller Issues: a) Bill of Lading b) Q88 c) CERTIFICATE OF ORIGIN d) CERTIFICATE OF QUALITY AND QUANTITY (Q&Q) at the Loading port. 4. Buyer pays 1% of the product amount for Cargo Marine Insurance Bid Bond to secure the Vessel and Transfer Title Ownership OR pays $195,000 for Authorization to Board the Vessel at the Destination port as the vessel arrive. Note: Buyer does not have the right to Dip Test the product they have not secured. 5. The seller will issue the following POP documents and order the re-routing of the vessel to the buyer's desired port and transfer the title to the potential buyer's company's name. a) Product Passport (Quantity & Quality Dip Test Analysis Report) b) Certificate of Origin c) Commitment to Supply d) Ullage Report e) Cargo Manifest f) Vessel Q88 g) Title Transfer Invoice h) Fresh SGS Report i) Injection Report 6. The vessel will arrive at the discharge port, and the buyer will carry out the CIQ/SGS inspection. Upon successful inspection, the buyer will make the full payment for the product to the seller through MT103 T/T.
Aviation spares.Repair, overhaul and maintenance services
En 590 10 ppm diesel and jet fuel.Brokers
Jet A1 is a widely used aviation fuel as it enables the aircraft to get the maximum energy with a minimum fuel load.
We manufacture all kind of aviation lights-light, medium and high intenstity lights.We also specialise in solar aviation lights with inbuilt photoswitch, alarm panels everything.
Aviation lights We supply aviation lights in following types -light -medium -high -solar intensity Lights are supplied in flashing and steady modes Light intensity in low type is 10 cadella
Product : Jet A-1 Delivery : FOB OR CNF AT BUYER OPTION Origin : USA Quantity : Minimum 2.000.000 BBLS to Maximum 6.000.000 BBLS Per month Contract : Min 12 Months Contract. Price : Instrument: Buyer bank issue NON-Transferable SBLC for 1 Year validity (it cover contract period) Payment : Each loading Tankers %50 will pay after loading against SGS and BL copy (non negotiable) and Balance %50 will pay after delivery Against Original BL than title of ownership assignment to buyer, than tanker will discharge. Inspection : by SGS Loading Port : Houston Commission: 0.50 cent per barrels for buyer broker and 0.50 cent per barrels for seller broker (like we said real deal, with real commission rates) Sales Procedure : 1-) Buyer will send LOI (with bank details, FOB or CNF choose with Target price of CNF of FOB otherwise we not accept any LOI) 2-) We send FCO 3-) Buyer bank send Pre-advice SBLC (this cost just 0$ or 50USD only depend on buyer's relation with their bank) 4-) We will send SPA (sales and purchase contract) 5-) Buyer bank send Irrevocable SBLC with 1 year validity (we will send SBLC text) 6-) If buyer request FOB deal they will arrange Tanker and send q88 for our and port acceptance 5days before Laycan date. 8-) when Loading done, Buyer will pay %50 of total cargo amount against SGS report and BL electronic copy (non-negotiable) 9-) After delivery balance %50 will pay against Original BL and shipping documents, after payment title of ownership assignment to buyer, than cargo discharge.
Jet Fuel is used in aviation and was formerly known as Kerosene. It is suitable for most jet aircraft, and it is the principal fuel used for jet turbine engines. It is also used in general aviation for compatible diesel engine planes. It meets stringent international requirements with a minimum flashpoint of 38'C and a maximum freezing point of -47C. Contact Us for more details & costs
Pallet dolly Proper protection, as per customer's requirements
Materials: 55cs The head of the snaps: 50crvc Thickness of cutter; 0.8-1.2 mm Packing: bulk, slide card packing
DC ground power units
Hi, I am closely connected to the seller mandate and can supply aviation kerosene Jet A1 fuel upto 5 mill barrel / month. Please contact me if you have any requirements for purchasing. I look forward to discussing further.
SOFT CORPORATE OFFER ATTENTION TO BUYER/BUYER REPRESENTATIVES. Here by issue this Soft Corporate Offer with presented term conditions and confirm our irrevocable corporate and legal responsibility, under penalty of perjury that we are ready, willing and able to supply the below mentioned products herein and issue a draft Contract then Sales Purchase Agreement upon acceptance of our term and conditions stipulated herein. The term and procedures stipulated herein is in accordance with the term and procedures of procuring Oil & Gas products from Russia Federation Terms of Negotiation Origin: Russia Federation Performance Bond : (Pb) 2% of the First Month Shipment Value Destination Aswp Incoterms: Fob / Cif / Tto Loading Port: Novorossiysk / Primorsk / Vladivostok / Rotterdam Ports Payment Terms: Irrevocable Lc, T/t Telegraphic Transfer, Bg or Sblc Mt760, Mt103/23, Mt103 Inspection: Sgs, Ciq or Similar Insurance: Paid by Seller, Covering 110% of Shipment Value Aviation Kerosene Jet Fuel Ja1/jp54/ts1 Minimum Liftable Quantity: 1,000,000 Bbl. Maximum 3,000,000 Bbl. Monthly Pricce Cif: Gross Usd $42.00/usd $40.00 Net Cif Price F.o.b: Gross Usd $38.00 Bbl Net: Usd $36.00 Bbl Origin: Russia Loading Port: Primorsk / Ust-luga/ Rotterdam CI DIP AND PAY FOB ACCEPTED TERMS AND PROCEDURE 1. Buyer sends ICPO with full banking details CP, Passport Copy and Company registration. 2. Seller issues CI to Buyer. 3. Buyer Sign/endorse CI within 48 hours. 4. Seller issue to Buyer following Transaction Documents: Tank Storage Receipt (TSR Valid 48 hours) Authorization to inspect (DTA Valid 48 hours) Authority to Verify (ATV) 5. Buyer upon receipt of the PPOP documents, buyer contact Tank farm for confirmation of the product and dip test within 48 hours. NOTE (BUYERâ??S FAILURE TO MAKE DIP TEST WITHIN 48 HOURS, BUYER WILL BEAR THE COST OF FURTHER EXPENSES) 6. Upon successful inspection, Buyer release payment for total product value. 7. Seller Transfer title and Trans-loading commence and issues NCNDA/IMFPA for commission payment.
Jet A1 fuel-20 Lakh barrel rotterdam
Jet A1 fuel-10 Lack barrel in Houston
We are able to supply multiple kind of petroleum product. Please read the procedure before you have send any inquiry. Buyer issues ICPO with banking details, corporate registration certificate and profile, passport copy of authorised representative and proof of fund. Seller issues draft contract for Buyer to countersign upon acceptance of the terms and conditions which shall be returned immediately. Buyer triggers Proof of Fund (MT199) to Sellerâ??s fiduciary bank which shall be acknowledged by return SWIFT (MT199). Within 5 days upon receipt of POF, Seller provides partial proof of product (PPOP) to Buyer for verification; a) Product Passport (dip test report) b) Authorisation-to-Sell & Collect (ATSC) c) Statement of Product Availability d) Refinery Commitment to Supply Product e) Certificate of Product Origin Buyer verifies PPOP and issue SBLC (MT700/760/799-Blocked) to Seller nominated bank account within five (05) days as guarantee for the product. In the event of default in the issuance of DLC / BG / SBLC within the grace period, Buyer shall be liable for charges of Storage Tank(s). Within 5 days upon receipt of payment guarantee, Seller proceed with the Act of Transfer (Change of Ownership Title) from Sellerâ??s name to Buyerâ??s name as legal title-holder of the product with the Ministry of Energy. Simultaneously, Seller appoints and executes charter party agreement (CPA) with the shipping company and sends full proof of product (POP) and shipping documents to Buyer via Bank-to-Bank; a) Approval to Export (issued by the Ministry of Justice) b) Tank Storage Receipt c) Certificate of Conformity d) Full set of Bill of Lading (03 original copies) e) Vessel Notice of Readiness (NOR) f) Vessel Estimated Time of Arrival (ETA) g) Marine Insurance Certificate h) Material Safety Data Sheet (MSDS) i) Vessel Q88 Document j) Vessel details k) Ullage Report l) Cargo Manifest m) Corporate Invoice Upon arrival of cargo and after successful SGS/CIQ at discharge port, Buyer makes payment for product delivery to Sellerâ??s Bank via SWIFT Telegraphic Transfer (MT103) within 72 hours. Seller pays commission to intermediaries as per MFPA within 50 hours.