Microtex traction cell is assembled in a high-grade plastic container containing high performance tubular positive plates in premium energy bags. Microtex traction cells deliver consistent reliable power. Our product is suitable for all weather condition. Water loss and maintenance is minimum. Microtex traction batteries are used in electrically powered vehicles like the forklift, Pallet Truck, Scissor Lift and any other industrial traction applications. Microtex lead acid traction batteries are manufactured in India by Microtex Energy P Ltd. for more than two decades. The unit has a well established modern battery manufacturing facility with a fully equipped chemical and electrical laboratory at Peenya, Bangalore. Microtex traction batteries are used in electrically powered vehicles like a forklift, tow truck, power trolley, lifting platforms and other industrial traction applications. These traction batteries are made to BS & DIN specification. Constructional Features: Each traction cell is assembled in a high grade plastic container The container containing high performance tubular positive and pasted negative plates. The positive and negative plates are separated by high-quality PE Separators The tubular positive plates have specially designed spines, cast from corrosion resistant lead-antimony-selenium alloy ensconced in the tubular bag which is Vibro-filled The pasted negative plates made up from a blend of oxide, special additives and expanded, aid in cell longevity The high-quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance The high-grade plastic containers are non-reactive to acid, temperature and the gases emitted by the cell Short-circuit between plates due to sediments is avoided by the use of a prismatic sediment spacer placed at the bottom of the plastic container on which the plates rest The splash-proof vent plugs prevent the escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell
Microtex electric multiple unit or emu battery is made up of 5 cells of 2 volts each. The cells assembled in molded monoblock hard rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. Water loss and maintenance is minimum delivers consistent reliable power. Microtex lead acid EMU batteries are manufactured by Mysore Thermo Electric Private Limited. Microtex EMU Battery is made up of 5 cells of 2 Volts each. The cells assembled in Molded Monoblock Hard Rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. The Microporous Vent Plugs fitted to the cells prevent the spilling of the electrolyte. Constructional Features: Each cell assembled in Monoblock Hard Rubber container containing Microtex hi-performance tubular positive plates in premium Energy Bags Acrylic Gauntlets bags, pasted negative plates manufactured under exacting control to withstand rough handling and electrically separated by high quality PE Separators The tubular positive plates have specially designed spines casts from corrosion resistant lead antimony-selenium alloy ensconced in tabular bag which is vibro-filled with active material and pickled, thus ensuring high-rate discharge, more capacity for a given volume, greater shock resistance and long life with excellent reserve capacity The pasted negative plates, made up from a blend of oxide, special additives and expander, aid in cell longevity The high quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance. Short-circuit between plates due to sediments is avoided by the use of sediment spacer at the bottom of the container on which the plates rest. The Microporous vent plugs prevent escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell Special Features: The low antimony content in the grid alloy ensures low gassing Water loss and maintenance is minimum Corrosion is negligible Very low self-discharge and internal resistance Excellent reserve capacity Delivers consistent reliable power Suitable for all weather conditions Long life cycle
We provide you with the best quality of battery at a reasonable prices.
Advantage 1.High invert efficiency and rapid start; 2.Great physical performance; 3.Low self-discharge rate; 4.Reasonable price; 5.Professional li-battery customization. Item parameter remark 1 Rating voltage 48 v 2 Rating capacity13ahCustomized 3 Minimum capacity12.54ah 4 5Over-discharge voltage protection28 â±0.7v 6Over-discharge voltage protection release28-30 â±0.7v 8Input charging voltage42v â±1% 9Over-charge voltage protection42.5 â±0.65v 10 Over-charge voltage protection release41.9 â±0.65v Release load 11Discharging rating current20aAdjustable 12Over-current discharge protection50 Adjustable 13Over-current protection delay time20â±5ms 14Charging rating current2aCustomized 15Fast-charging current8aCustomized 16Short circuit current protectionEnable 17Working temperatureDischarge -20 --60â°c charge 0 -- 45â°c 18 Storage temperature0-45â°c 19 Cycle life More 500 times Cauction: 1-use a specified charger, fully charge the battery before first-time using. 2-do not disassemble the battery and battery pack in any way. 3-do not short circuit battery terminals, don't not reverse the positive and negative pole 4do not throw the battery into fire or heat, do not put the battery into microwave oven or pressure vessel. 5-do not immerse battery in water or allow it to get wet! 6-if the battery leaks or releases strange odor, pls remove it from place near fire place immediately. 7-keep the battery in a cool dry surroundings if it stands by. 8-do not place or storage this product under high temperature(or fire) or humid environment. 9-using the product, a little hot is normal. 10-stay away from children when charging or in storage.
1nominal capacity: 4500 mah standard charging&discharging 2 rating voltage: 3.70v 3 end of charging voltage: â?¤50mî© 4 end of charging current: 4.20â±0.02v 5 end of charging current: 0.02 c5a 6 end of discharge current: 3.0v 7 end of discharge voltage:0.02 c5a 8 standard discharging current: 0.02 c5a 9 fast charging current: 0.5c5a 10 fast discharging current: 0.5c5a 11 max discharging current: 2c5a 12 operating temperature&humidityCharging: 0âºc-45âºc;discharging:-20âºc-60âºc Lower than85%rh 13 storage temperature&humidity: -5âºc--30âºc, not higher than 45âºc Lower than85%rh 14 max shape size (mm) diameter(ï?): 26mm height(h):65.0mm 15 weight: around 70 g
1 capacity:11ah 2 minimum capacity:14.5ah 3 rating voltage:24v 4 overcharge Detection voltage:29.4v 5 release voltage :29.75v 6 detection delay time:1.0s 7 detection voltage:25.55v 8 release voltage:21.00v 9 detection delay time:100ms 10 over discharge current:25a Delay time: 1.0s 11 short detection(short detection delay time):100~600us 12 release conditions: cut off
Advantages: 1.Comes with 3-prong ac input plugs which you could feel free to use our online ups without any safety concerns! 2.Able to fit with inverter for changing into 220v output, which you could directly charger your ac devices with any extra connectors/adapters. 3.2 ways to recharge your ups without worrying ups power issue : charger+solar panel 4.The very lightest, thinnest, smallest volume but with maximum capacity ! 5.Numbers of max lithium metal cells: 90 ! 6.Very light and very portable! easy for carry along. 7.Perfect for fields: home, outdoors, industrial, medical, army, technology industry, especially uav supply etc. Â?? Product model Blv ups1260a Capacity 12v/60ah ups battery Battery type Lithium battery Output model 500w(standard), 1000w(maximum) Usb output 4usb output ports fit for any mobile, ipad, tablet, or other 5v Electronic devices Dc output 4*12v ports, maximum 20a output current Ac input 110-250v, 50/60hz Solar charging 18v (100w max.) Blackout response time
Product Model BLV :UPS1280D Capacity:12V/80AH UPS BATTERY Battery Type: Lithium battery Output model: 500W(standard),1000W(Maximum) DC Output: 4*12V ports,4*5V USB, maximum 20A output current AC Input: 110-250V,50/60Hz Solar charging: 18V (100W max.) Blackout Response Time:
Product model Blv :ups12100d Capacity:12v/100ah ups battery Battery type: lithium battery Output model: 500w(standard), 1000w(maximum) Dc output: 4*12v ports, 4*5v usb, maximum 20a output current Ac input: 110-250v, 50/60hz Solar charging: 18v (100w max.) Blackout response time:
1 Capacity:14Ah 2 Minimum Capacity:13.5Ah 3 Rating Voltage:36V 4 Overcharge Detection voltage:42.5V 5 Release voltage :41.5V 6 Detection delay time:1.0S 7 Detection voltage:27.50V 8 Release voltage:30.00V 9 Detection delay time:100mS 10 Over discharge current:25A delay time: 1.0S 11 Short detection(Short detection delay time):100~600us 12 Release Conditions: Cut off
1 Capacity:15Ah 2 Minimum Capacity:14.5Ah 3 Rating Voltage:36V 4 Overcharge Detection voltage:42.5V 5 Release voltage :41.5V 6 Detection delay time:1.0S 7 Detection voltage:27.50V 8 Release voltage:30.00V 9 Detection delay time:100mS 10 Over discharge current:25A delay time: 1.0S 11 Short detection(Short detection delay time):100~600us 12 Release Conditions: Cut off
1 capacity:12ah 2 minimum capacity:11.5ah 3 rating voltage:36v 4 overcharge Detection voltage:42.5v 5 release voltage :41.5v 6 detection delay time:1.0s 7 detection voltage:27.50v 8 release voltage:30.00v 9 detection delay time:100s 10 over discharge current:25a Delay time: 1.0s 11 short detection(short detection delay time):100~600us 12 release conditions: cut off
1 capacity:12ah 2 minimum capacity:11.5ah 3 rating voltage:36v 4 overcharge Detection voltage:42.5v 5 release voltage :41.5v 6 detection delay time:1.0s 7 detection voltage:27.50v 8 release voltage:30.0v 9 detection delay time:100ms 10 over discharge current:25a Delay time: 1.0s 11 short detection(short detection delay time):100~600us 12 release conditions: cut off
1 capacity:12ah 2 minimum capacity:11.5ah 3 rating voltage:36v 4 overcharge Detection voltage:42.5v 5 release voltage :41.5v 6 detection delay time:1.0s 7 detection voltage:27.50v 8 release voltage:30.00v 9 detection delay time:100s 10 over discharge current:25a Delay time: 1.0s 11 short detection(short detection delay time):100~600us 12 release conditions: cut off
1 capacity:12ah 2 minimum capacity:11.5ah 3 rating voltage:36v 4 overcharge Detection voltage:42.5v 5 release voltage :41.5v 6 detection delay time:1.0s 7 detection voltage:27.50v 8 release voltage:30.00v 9 detection delay time:100ms 10 over discharge current:25a Delay time: 1.0s 11 short detection(short detection delay time):100~600us 12 release conditions: cut off
1nominal capacity: 3000 mah standard charging&discharging 2 rating voltage: 3.70v 3 end of charging voltage:
1nominal capacity: 2600 mah standard charging&discharging 2 rating voltage: 3.70v 3 end of charging voltage:
Specifications: Product Type: GR Lipo Battery Pack Model No:Bonka Power GR 1500mAh 80C 4S1P Voltage: 14.8V Weight: 192g Capacity: 1500mAh Dimensions:31*34*90(mm) Continuous Discharge Current:80C(120.0A) Balance Plug: JST-XH Burst Discharge Current:150C(240A) Discharge Plug: Black XT-60 Charge Rate: 1-3C Recommended, 5C Max Advantages: -Higher energy density -Lower internal resistance(600 times) -Higher discharge rated,giving more power under load
1nominal capacity: 2600 mah standard charging&discharging 2 rating voltage: 3.70v 3 end of charging voltage:
Specifications: Product Type:Lipo Battery Pack Model No:Bonka Power 1300mAh 75C 4S1P Voltage: 14.8V Weight: 145g Capacity: 1300mAh Dimensions:31*34*72 (mm) Continuous Discharge Current:75C(97.5A) Balance Plug: JST-XH Burst Discharge Current:150C(195A) Discharge Plug: XT-60 Charge Rate: 1-3C Recommended, 5C Max Bonka 1300mAh 75C 3S1P 11.1V Lipo Fit for high-power airplane, SKY-HERO,extreme 3D helicopters and other applications
