Type: Coil Spring
Spring Material: Steel
Applicated Vehicle: Man
OEM Number: 81417226061
Warranty: 1 Years
MOQ: 100PCS
HS Code:8708809000
Application: Auto Suspension Parts
Normal Payment Terms: 30% T/T in advance and balance before shipment
Packed by cartons and can be customized by clients' requirement
i.About The Product This device is designed based on the Toyota lexus LS400 front axle assembly to holistically demonstrate structures and operation of the EPS system and front axle suspension system. The device applies to theoretical teaching and maintenance training of the EPS system in secondary and senior vocational skill schools, normal education and training institutions. ii. Features 1.A real and operable EPS system is used to illustrate the structure of the system. 2.A three-phase motor drives a booster pump to operate the steering wheel and adjust the speed signal imitation knob. In this way, the device demonstrates electric power steering. 3.The training bench is made of advanced aluminum-plastic plate with characteristics of not less than 4mm thick, corrosion resistance, impact resistance, pollution resistance, fireproof, and moistureproof. Its surface are processed by special craft and spraying primer. Never fade color circuit diagram and working principal diagram are painted on the board whose surface coating with varnish. The trainees can learn and analyze the working principle of the control system by referencing the diagram and the real object. 4.The training bench is installed with detection terminals to detect electric signals, for example, resistance, voltage, current, and frequency, of circuit components of the EPS. 5.The training bench's base frame is made in steel and the surface is paint-coated. Self-retention wheels are installed to ensure that the bench is flexible, reliable and endurable. 6. Equipped with intelligent fault setting and appraisal system, include fault setting, troubleshooting and assessment functions etc. iii. Basic Parameter 1.Size: 1700mm × 1200mm × 1800mm (length x width x height) 2.Driving power supply: three-phase four-wire (three-phase five-wire 380±10% V 50 Hz) 3.Input power: A.C. 220V ± 10% 50 Hz 4.Operating power supply: 12V DC 5.Operating temperature: -40? to +50? 6.Oil pressure gauge: 0 – 100 kg/psi 7.Three-phase asynchronous motor:
i.About The Product This device is designed based on the Volkswagen Jetta front axle assembly to holistically demonstrate structures and operation of the power steering system and front axle suspension system. The device applies to theoretical teaching and maintenance training of the power steering and front axle suspension systems in secondary and senior vocational skill schools, normal education and training institutions. The device can be used for structure display, operation simulation, and assembly and disassembly training. ii.Features 1.Real and operable power steering and independent suspension systems are used to illustrate structures of these two systems. 2.A three-phase motor drives a booster pump to operate the steering wheel. In this way, the device demonstrates power steering. 3.The training bench is installed with a pressure meter that displays real-time oil pressure changes of the booster pump. 4.The training bench's base frame is made in steel and the surface is paint-coated. Self-retention wheels are installed to ensure that the bench is flexible, reliable and endurable. iii. Basic Parameter 1.Size: 1700mm × 900mm × 1100mm (length x width x height) 2.Driving power supply: three-phase four-wire (three-phase five-wire 380 ± 10% V 50 Hz) 3.Operating temperature: -40? to +50? 4.Oil pressure gauge: 0–100 kg/psi 5.Three-phase asynchronous motor: ? Model: YT 90S-4 ? Voltage: A.C. 220V/380V ? Power: 1.5 KW ? Rotation speed: 1400 r/min
Working principle- The flow through the nozzle creats a vacuum at the valve seat. Air is drawn in through the sensing port at the tip of the spout, through the safety cut out, past the diaphragm,and into the fuel. The valve will remain open while the air flows freely. When the fuel reaches the sensing port, suction builds up rapidly until it lifts the diaphragm and trips the automatic action which shuts the valve.The mechanic also trips if the ball of the safety cut off rolls back to obstruct the free air flow.It will also occur if the spout is pointed upwards or if the nozzle is dropped onto the ground. The valve opens with the flow, allowing smooth low control for"to-the penny" dispensing. It closes against the flow for a soft shock-less closure.
All type of guards are available if requested.
All type of guards with block magnet are available if requested.
"ZVA" logo or blank are available.
100% Factory tested.
Material
Body Aluminum
Spout Aluminum
Swivel Aluminum
Seals Buna-N, Viton
Covers PVC
Technical Specifical
Working Pressure 0.2 Mpa
Flow Rate 15 - 45 L/m
Auto Shut-off sensibility 0.1 second
Spout Internal Diameter 16mm
Intel Thread M34 ¡¨¢ 1.5
Net Weight 1.1 KG
Order Specifications
Item No. Swivel Inlet Size
ZVA DN1901 without swivel M34 ¡¨¢ 1.5
ZVA DN1902 with swivel Female, BSP, 3/4"
ZVA DN1903 with swivel Female, NPT, 3/4"
ZVA DN1904 with swivel Male, BSP, 3/4"
ZVA DN1905 with swivel Male, NPT, 3/4"
ZVA DN1906 with swivel Female, BSP, 1"
ZVA DN1907 with swivel Female, NPT, 1"
ZVA DN1908 with swivel Male, BSP, 1"
ZVA DN1909 with swivel Male, NPT, 1"
Color Options
Red, Green, Blue, Yellow, Orange, Black
Features and Benefits:
For all normal gasoline fuels - leaded or unleaded. Not suitable for water and hydrous liquids, alcohols, solvents, viscous oils and diesel fuels.
TRISTOP - Venturi controlled automatic shut-off on request and safety cut-out attitude valve(protection when tilting and falling), 3- speed lever latch with removable latch pin.
Full adjustable control of the vapour volume flow independent of the fuel flow delivery.
ON/OFF function - Secure termination of the vapour line when there is no fuel flow. Important when connecting two or more hoses to a vacuum pump.
Design "GR"- with vapour suction apout, internal vapour channel and COAX hose coupling M34*1.5. Reduced spout DN 16 acc. To ISO9158.
Design "GRVP" - additionally with gas-and proportional valve GVP. 100% Factory Tested.
Material
Body Aluminum
Spout Aluminum
Vapour Suction Spout Bronze
Springs Galvanised or Stainless Steel
Diaphragm Buna-N, Polyurethane, Viton
Seals Buna-N, Polyurethane, Viton
Inner Parts Brass, Bronze, Acetal Resin/Delrin or Ultrapek
Covers PVC
Technical Specifical
Working Pressure 0.05 - 0.35 Mpa
Max Flow Rate 45 L/m
Temperature =A17
Inlet Thread M34¡¨¢1.5
Net Weight 1.17 KG
Color Options
Red, Green, Black
Order Specifications
Item No. Proportional Valve
ZVA-BT200GR Without Proportional Valve
ZVA-BT200 GRVP With Proportional Valve
Features and Benefits:
Even, Smooth spray pattern - Minimizes diesel foaming and false shut-off
Extra long anchor spring - Keeps the nozzle secure in most large fill opening.
Help reduces spills - A unique two-stage lever design assures a positive shut-off, even if held wide open.
Three Position hold-open device - One finger control of hold-open mechanism means easy setting of flow rate.
Easily replaced spouts -Simply remove three screws, Replacement kits are readily available from TDW.
Dash-pot Action - For smoother closing action and reduced line shock.
Dual Poppet - Easy to open nozzle against high pressure.
Available with flow lock - Designed to shut off automatically when the spout is tipped ip, limiting spillage.
Suitable for diesel, kerosene, gasoline and gasoline with ethanol blends.
100% Factory Tested.
TDW-7H UL LISTED.
Material
Body Aluminum
Lever and lever guard Duratuff
Main stem Extra hard stainless steel
Seals Buna-N, Viton
Technical Specifical
Working Pressure 0.2 Mpa
Auto Shut-off sensibility 0.1 second
Inlet Size 1"
Thread NPT/BSPT
Spout Outlet Diameter 30 mm, 28.7 mm
Flow Rate 20 - 120 L/m
Net Weight 1.55 KG
Color Options
Red, Green, Blue, Yellow, Black
Order Specifications
Item No. Inlet Thread Spout O.D.
TDW-7H01 1" NPT 28.7 mm
TDW-7H02 1" NPT 30 mm
TDW-7H03 1" BSPT 28.7 mm
TDW-7H04 1" BSPT 30 mm
TDW-7HB01 1" NPT 28.7 mm
TDW-7HB02 1" NPT 30 mm
TDW-7HB03 1" BSPT 28.7 mm
TDW-7HB04 1" BSPT 30 mm
16” api 5l grade x42; sch std (406.4*9.53 mm, 93.21 kg/m); smls; psl1; qty:2000mt. Origin:china very attractive offer for you @ usd 865/mt or usd 80/meter length.
Specification
Size(cm) Absorbency (Liter )
1.2m x 1.2m 10~15 Liter
1.5m x 2.5m 10~70 Liter
1.5m x 1.8m 10~40 Liter
1.8m x 2.5m 10~75 Liter
Available design in the Width of 1.2m~1.8m upon request.
50pcs/roll.
27377 Automobile Spare Parts Supplies Suppliers
Short on time? Let Automobile Spare Parts Supplies sellers contact you.
