Cow split leather work gloves, green leather reinforcement on palm, natural
drill cotton on back and safety cuff grade.
Weight: 212 grams/pair.
Width: 13cm, Length: 27cm..Size 11
Natural cow split leather work gloves, patched or full palm, yellow drill cotton
on back and rubberized cuff.
Weight: 182 grams/pair.
Width: 13cm, Length: 28cm
Size 11.
Natural cow split leather work gloves, patched or full palm, yellow drill cotton on back and rubberized cuff.
Weight: 182 grams/pair.
Width: 13cm, Length: 28cm
Size 11.
Appearance colorless transparent liquid Conforms
Purity 99.5%
Moisture 0.1%
Acid content 0.25%
High boiling material 0.25%
Acetonylacetone not found
Density 0.972~0.975
Refractive index 1.45±0.002
Evaporation residue 0.01%
Iron content 1ppm
2,4-HEXANEDIONE not found
01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes.
02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market;
03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element.
Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.
Manufacturer Henan UTERS Industrial Technology Co.,Ltd
Brands UTERS / Negotiable
Filter Type Hydraulic Oil Filter Element
Size Data Please contact our sales manager if you need to confirm parameters.
End caps Material Galvanized Carbon Steel; Stainless Steel; Nylon Plastic; Aluminum Machining And Other Standard Materials
Frame Material Galvanized Carbon steel punching frame; stainless steel punching frame, etc.
Filter Material 304 Stainless Steel Mesh; Glass Fiber; Oil Filter Paper And Other Standard Materials
Filter Accuracy 1~100um; filtration ratio: Xâ?§100.
Collapse Pres. 21bar~210bar
Filter Media Conventional Hydraulic Oil, Lubricating Oil, Fuel, Etc.
Operating T. -30â??~+100â??
Structure Strength 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa.
Position On the suction line, pressure oil line, return line, bypass, and separate filter system.
Application Steel, Electric Power, Metallurgy, Shipbuilding, Aviation, Papermaking, Chemicals, Machine Tools And Construction Machinery, Construction Machinery And Other Fields.
Packing Plastic bag inside,paper box outside / Negotiable
Transportation DHL, UPS, FEDEX, SF And Other International Express, By Air, By Sea, Or Special Line Services.
Production Time 10 Work Days After Payment / Negotiable
Warranty 12 months/ 365 days after shipment.
Testing Standard ISO 2941 Filter element-Test method for filter element rupture resistance
ISO 2942 Filter Element-Test Method for Structural Integrity of Hydraulic Filter Element
ISO 2943 Filter Element-Test Method for Compatibility of Hydraulic Filter Element Material and Liquid
ISO 3723 filter element-end-to-end compliance test
ISO 3724 filter element-determination of fatigue characteristics
ISO 3968 Filter Element-Differential Pressure Flow Characteristics
ISO 4572 Filter Element-Multiple Pass Method for Determining Filtration Characteristics
Instructions for use
01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes.
02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market;
03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element.
Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.
