OFFROAD Vehicles Front & Rear Ring and pinion gear for Jimny,Jeep Rubicon & Sahara,Nissan Y60 Y61,Toyota ,Isuzu,Mitsubishi
Type : planetary, helical, worm Orientation : horizontal, vertical Mounting : foot, flange Input (rpm or ratio) : 750-1500 rpm Output torque (nm) : 20-300 rpm Brand : roadcon Material : cast iron, steel and bronze Application : industrial use Condition : new Power source : 5 hp to 125 hp Voltage (v) : 220v Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the series h helical gear boxes range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation.
1.Ideal choice for quick tire replacement and simple service alongside of vehicle 2.Surface mounted or movable used, with optional movable kits. 3.Special and practical platform extension design broadens your service scope. 4.Pneumatic release system decreases noise emitted during service work. 5.Configuring mechanical safety decreases noise emitted during service work. 6.Cnfiguring mechanical safety lock to ensure that lift at different heights to get the absolute security 7.Optional 24V control voltage 8.Anti-skid platform effectively prevents sudden drop-down of vehicle 9. Dynamic testing with 115% of rated capacity and static testing with 150% of rated capacity
1.Ideal choice for quick tire replacement and simple service alongside of vehicle 2.Surface mounted or movable used, with optional movable kits. 3.Special and practical platform extension design broadens your service scope. 4.Pneumatic release system decreases noise emitted during service work. 5.Configuring mechanical safety decreases noise emitted during service work. 6.Cnfiguring mechanical safety lock to ensure that lift at different heights to get the absolute security 7.Optional 24V control voltage 8.Anti-skid platform effectively prevents sudden drop-down of vehicle 9. Dynamic testing with 115% of rated capacity and static testing with 150% of rated capacity
The cirrus sr22 is a single-engine four- or five-seat composite aircraft built from 2001 by cirrus aircraft of duluth, minnesota. It is a development of the cirrus sr20, with a larger wing, higher fuel capacity, and a more powerful, 310-horsepower (231 kw) engine. The sr22 has been the world's best-selling general aviation (ga) airplane every year since 2002. It is the most-produced ga aircraft made from composite material, accounting for over 30% of the entire piston aircraft market General characteristics Crew: one Capacity: four passengers Length: 26 ft 0 in (7.92 m) Wingspan: 38 ft 4 in (11.68 m) Height: 8 ft 11 in (2.72 m) Airfoil: roncz Empty weight: 2, 225 lb (1, 009 kg) Gross weight: 3, 600 lb (1, 633 kg) Fuel capacity: 92 us gallons (348 litres) Powerplant: 1 continental io-550-n six cylinder horizontally opposed aircraft engine, 310 hp (230 kw) Propellers: 3-bladed Performance Cruise speed: 183 kn (211 mph; 339 km/h) Stall speed: 60 kn (69 mph; 111 km/h) flaps down Range: 1, 049 nmi (1, 207 mi; 1, 943 km) with reserves at 65% power Service ceiling: 17, 500 ft (5, 300 m) Rate of climb: 1, 270 ft/min (6.5 m/s)
The robinson r22 is a two-bladed, single-engine light utility helicopter manufactured by robinson helicopter company. The two-seat r22 was designed in 1973 by frank robinson and has been in production since 1979. General characteristics Crew: 1 Capacity: 2, including pilot Length: 28 ft 8 in (8.74 m) Rotor diameter: 25 ft 2.4 in (7.67 m) Tail rotor diameter: 3 ft 6 in (1.07 m) Height: 8 ft 11 in (2.72 m) Disc area: 497 (46.2 m) Empty weight: 880 lb (399 kg[23]) Loaded weight: 920 lb (417 kg) Max. Takeoff weight: 1, 370 lb (635 kg) Main tank total capacity: 19.8 us gallons (75 liters) Main tank usable capacity: 19.2 us gallons (73 liters) Optional aux tank total capacity: 10.9 us gallons (41 liters) Optional aux tank usable capacity: 10.5 us gallons (40 liters) Powerplant: 1 ã? lycoming o-320-a2b or -a2c flat 4 piston engine, 124 hp (93 kw) Performance Never exceed speed: 117 mph, 188 km/h, 102 kts Cruise speed: 110 mph, 177 km/h, 96 kts Range: 240 mi (386 km) Service ceiling: 14, 000 ft (4, 267 m) Rate of climb: 1, 200 ft/min (6.1 m/s) Disc loading: 2.61 lb/ (13.7 kg/m) Fuel consumption: 8~10 us gal/hr Power/mass: 0.095 hp/lb (0.147 kw/kg) Endurance: approx. 3 hours, with 30-minute reserve
The cessna citation mustang, model 510, is a very light jet (vlj) class business jet built by cessna aircraft company at their independence, kansas production facility. The mustang, in standard configuration, has four passenger seats in the aft cabin, a toilet, and seating for two in the cockpit. Like most other light jets, the mustang is approved for single-pilot operation. General characteristics Crew: one or two pilots Capacity: 4 to 5 passengers Length: 40 feet 7 inches (12.37 m) Wingspan: 43 feet 2 inches (13.16 m) Height: 13 feet 5 inches (4.09 m) Empty weight: 5600 lb (2540 kg) Useful load: 3130 lb (1420 kg) Max. Takeoff weight: 8645 lb (3930 kg) Powerplant: 2 pratt & whitney canada pw615f turbofans, 1460 lb thrust (6.49 kn) each Performance Maximum speed: mach 0.63 (483 mph, 777 km/h) Cruise speed: 340 ktas (390 mph, 630 km/h) Range: 1167 nmi (at max. Takeoff weight) (1, 343 mi, 2, 161 km) Service ceiling: 41000 ft (12500 m) Rate of climb: 3010 fpm (917 mpm) Thrust/weight: 0.337 (at max. Takeoff weight) Takeoff distance: 3, 110 ft (948 m) Landing distance: 2, 380 ft (729 m)
Machined components, forged gear blanks and shafts.Manufacturer & exporter
Machinery parts, coupling, pulley, sprocket, gearboxes.
Machine Spare Parts Like Clutches, Couplings, Cnc Machined Components, Castings In Machined And Unmachined Condition..
Cctv ip camera, uhf reader, biometric attendance systems, biometric access control system all security systems.
We are manufacturing wooden handicraft items home ware, hotel and kitchen ware jewellery boxes and etc..
Steam vaporizer, sanatizer, masks, transformer tanks, steel and wood furniture, lentil, rice and more.Supply and manufacturing
3ply surgical face mask.Supply any kind of products
Medical kits and paper products .
Yarn.Supply of goods
Arabian dates, Safawi dates, ajwa dates, Sukkari dates, dry dates, all kind of dates.
Areca leaf plates.We are manufacturing areca leaf plates and bowls. we are ready to supply large quanity plates with reasonable cost.
Furnitures.We will produce and supply best wooden furnitures
T shirt, polo shirt, sweater, cardigans.We have been supplying all kinds of readymade garments from bangladesh to global market
