Being a very stable in flight aircraft and usually really fly out of the box, this radio remote control RC aircraft is the great tool for the beginners. Perform rolls, loops, and more with your new RC fighter jet. Features * Comes ready to fly with all electronics pre-installed * 6-channel receiver * FM 4-channel proportional radio control device (with V-type mixed controller) * Powerful ducted fans makes it possible to fly this plane at high speed in the situations with much wind * Excellent stability of nosing up and down * Ready to fly in just minutes * Super tough, lightweight airframe * Shock resistant reinforced fuselage and strong wings * Excellent flight performance * Excellent stability and aerobatic capability Package Content * 1 x 4CH Radio Remote Control RC Aircraft Body Kit Specification Long Fuselage 890mm Wingspan 1,010mm Flying Weight 600g Motor 370A Speed Controller (ESC) 9.6V/40A Servo 8g, 0.11sec/60¦ Torque 0.80kg Battery (NiMH) AAA 650mAh/9.6V Radio Control Distance 300m Material EPO Color Blue, Champagne Package Gross Weight 1.900kg Package Size (LxWxH) 103.3cm x 28.7cm x 21.6cm Package Type Paper Box
Good looking & in various colors. Conforms to EN71 Process: cold press.
Safe,gentle & environmental Conforms to ROHS Process: hot press. 73*58*66
The design and the color of the logo can be changed as you like.
Length: 19cm; 50cm; 80cm; 90cm; 100cm; 110cm; Diameter: 9mm; 10mm; 12mm; 14mm; 16mm 6 sets/ctn. 6.3kg/ctn, 820x100x220mm
Four group or six group. 15kg/ctn, 6sets/ctn, 820x300x250mm
Different styles, different wood spices Paper carton, cotton bag, black net bag, wooden box
Package:color box Packing:2pcs/ctn Measurement:72*40.5*58cm.
Kite is fly in air with the string and you can fly it , its very easy and you will get fun.
Function Declaration: .37-key Standard Keyboard .30Tones,10rhythm .6sounds electrnic drum set . 8 Demo Songs . Record /Re-play . Volume Control / Tempo Control . Precussions Sounds Effect . Speacial Sounds . Auto-power Off . Run on 6 'AA' Batteries (Not included ). Qty:36PCS/Ctn Box size :48*27.5*6cm Carton meas:99*50*56CM G.W:33 KGS N.W:31 KGS.
Looking to learn to fly? With the assistance of an club instructor, the E-flite Apprentice 15e RTF is the perfect trainer to learn the basics and beyond. The Apprentice is a 15-size high-wing trainer that comes with everything you need to go from buy to fly. This one-box purchase includes the full-range DX5e Spektrum radio with the 2.4GHz interference-free technology, AR500 receiver, and a 3S 3200 mAh 15C Li-Po battery and charger. There is no building required just charge and install the included battery, mount the wing and tail and fly. The Apprentice is powered with a 15-size brushless outrunner providing excellent power and performance. This trainer has a flat-bottom wing and produces gentle flight characteristics. The Apprentice is made from durable, lightweight Z-foam making it great for training and sport flying. Every beginner pilot experiences their share of bumps and bruises, so the Apprentices durable build and easily repairable construction ensures more opportunities for success. The Apprentice is the perfect training aircraft thanks to its gentle flight characteristics. This model is equipped with tricycle landing gear allowing better ground handling over tail-dragger aircraft. This landing gear setup is durable and will also allow take-offs and landings on maintained grass runways. This is a high quality trainer with an excellent setup taking the pilot from beginner to basic aerobatics all from this one box purchase. Go from buy to fly with the Apprentice. Features * Completely ready-to-fly * Durable Z-Foam construction * Included DX5e transmitter and AR500 receiver * 3S 3200mAh Li-Po battery included * Li-Po balancing charger included * Tricycle landing gear * 15-size brushless outrunner motor installed * E-flite 30A Brushless ESC installed * All electronics installed Specifications Wing Span: 58 in (1475mm) Overall Length: 37 in (940mm) Wing Area: 525 sq in (33.7 sq dm) Flying Weight: 40 - 45 oz (1135 - 1275 g) Motor Size: 15-size brushless outrunner (installed) Servos: E-flite sub-micro servos (installed) Trim Scheme Colors: White Z-foam with red,black and silver decals Prop Size: 11 x 8 electric (included) Speed Control: 30A Brushless Pro SBC (EFLA1030)(included) Recommended Battery: 3200mAh 3S 11.1V 15C Li-Po (EFLB1040)(included) Approx. Flying Duration: 15 minutes Approx. Assembly Time: 30 minutes Charger: 3S Balancing Li-Po charger (EFLC3010) Experience Level: Beginner and Up Radio: Spektrum DX5e 2.4GHz (included) Assembly Required: Yes. Guarantee Packaging.
For decades, the T-34 has been the airplane in which nearly all U.S. Navy, Marine, and Coast Guard aviators have earned their wings of gold. Based upon the civilian Model 35 Bonanza, the all-metal T-34 has been rugged and reliable, enduring countless loops, rolls, stalls and hard landings at the hands of student pilots throughout the years. And now, E-flite provides you with the most advanced electric training aircraft in the RC world. ePTS stands for Electric Progressive Trainer System an airplane that will allow you to go from training to aerobatics without upgrading or purchasing a new plane. This model comes ready-to-fly no building is required and everything needed to fly is included. The T-34 Mentor sports removable NACA droops and a progressive 3-position flap system to provide extra stability and slow flying. Master the basics, remove the droops, and change flap position to move up to great sport performance and mild aerobatics. Key Features * Progressive Trainer System design for progressive flight training * Completely assembled with all required accessories in the box no other items need to be purchased * Spektrum DX6i 2.4GHz computer radio included * EFL Power 25 Outrunner Motor included * 11.1V Li-Po battery and Li-Po balancing charger included * Wing platform utilizes two different Selig airfoils * Molded NACA droops included * Preset 3 position flaps built into the structure * Balsa and ply construction * Genuine UltraCote covering * Painted fiberglass cowl Product Specifications * Wing Span: 55 in (1575mm) * Overall Length: 44 in (1110mm) * Wing Area: 545 sq in (34.9 sq dm) * Flying Weight: 5-5.2 lb (2.2-2.3 kg) * Motor Size: Power 25 Brushless Outrunner Motor, 870Kv (installed) * Radio: Spektrum DX6i 2.4GHz (included) * Servos: E-flite Standard Servos (installed) * Trim Scheme Colors: White UltraCote with Flame Red and Black UltraCote Trim * Prop Size: 12x8 Electric (installed) * Spinner Size: 2-1/4" (installed) * Speed Control : 40A Brushless Pro SBC (included) * Recommended Battery: 3200mAh 3S 11.1V 15C Li-Po (included) * Approx. Flying Duration: 10 - 12 minutes * Approx. Assembly Time: 1 Hour * Charger: 3S Balancing Li-Po charger * Experience Level: Beginner. Guarantee Packaging.
Thousands of pilots have earned their wings with the Hangar 9 Alpha trainer. Now, Hangar 9 introduces an updated version of this ever-popular traditional high-wing trainer with the added benefit of DSM2 technology that provides freedom from frequency restrictions and interference. And, this Alpha has a completely modernized look that makes it a great-flying and great-looking aircraft. The Alpha 40 DSM2 RTF is the first glow trainer to come equipped with Spektrums advanced DX5e 2.4GHz DSM2 5-channel full-range aircraft system. Besides providing freedom from frequency restrictions and interference, the DX5es DSM2 technology offers superior performance secure link for glitch-free performance. The system also includes the Spektrum AR500 Receiver. Other DX5e features include: * Full-range capability * Secure link for glitch-free performance * HI and LO rates for beginner and advanced pilots * Servo reversing * Delta wing mixing * Digital trims * Includes 4 AA Alkaline batteries * Audible low voltage warning * LED voltage display * Charge jack for Ni-MH batteries * Compatible with all existing Spektrum aircraft receivers The DX5e is not only perfectly suited for the Alpha 40 it can also be used to fly just about any type of model where 5 channels are appropriate due to its full-range capabilities. With the ready-to-fly Alpha Trainer from Hangar 9, success is all but assured, thanks to its gentle, beginner-friendly flight characteristics and the ingenious, hassle-free Evolution Trainer Power System that makes the Alpha the easiest-starting, smoothest-running trainer available. With the engine and radio gear installed, the Alpha 40 is ready to fly in the just minutes. This easy-to-fly trainers is perfect for first-time pilots because of its super-stable, self-righting flight characteristics. And, club instructors will find the Alpha 40 to be the most valuable tool for teaching new pilots the basics of RC flight. Features * Completely built and ready to fly in minutes. * Equipped with Spektrum DX5e 5-channel, full-range 2.4GHz DSM2 radio system * Hassle-free Evolution Trainer Power System installed * Easy-to-fly, traditional high-wing trainer perfect for first-time pilots * Super-stable, self-righting flight characteristics * Hangar 9 quatlity balsa and plywood construction Specifications Wingspan: 63 in (1600mm) Overall Length: 52.5 in (1334mm) Wing Area: 710 sq in (45.8 sq dm) Flying Weight: 5.25 lb (2.4 kg) Engine Size: Evolution Power Trainer System (installed) Radio: Spektrum DX5e 5-channel 2.4GHz DSM2 system w/AR500 receiver (installed) Servos: Hangar 9 standard servos (installed) Prop Size: Evolution 3-Blade Trainer System Propeller (included) Spinner Size: 2" (included) Approx. Flying Duration: 10-12 minutes Experience Level: Beginner Assembly Time: Less than 1 Hour. Guarantee Packaging
The Blade 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. The Blade 400 3D is equipped with state-of-the-art features like brushless power, digital servos, a heading lock gyro, CCPM control and symmetrical blades. Its also big enough that you can fly outdoors in breezier conditions that would ground smaller micro-helis. And because its flight tested at the factory no pre-flight setup is required. The Blade 400 3D is ready for everything from smooth hovering to 3D aerobatic flying as soon as you finish charging the battery. There is nothing left to assemble or set up. You can fly it just about anywhere, anytime thanks to the included Spektrum 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i+óGé¼Gäós advanced DSM2 protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision. The Blade 400 3D is the first ready-to-fly mini-heli to come equipped with Spektrum advanced DX6i 2.4GHz DSM2+ 6-channel programmable computer aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i DSM2 technology offers other unique advantages like faster control response and innovative features such as ServoSync+. ServoSync automatically resequences transmitted data so mixed servos receive their pulses at the same time so you can fly extreme 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6100e Microlite Receiver. E-flite uses top-quality engineering and materials in everything it makes, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby so your electric flight experience is always a positive one. Features * Completely assembled and test flown at the factory * Capable of sport flying and 3D aerobatics right out of the box * Includes Spektrums DX6i 2.4GHz DSM2 6-Channel computer programmable transmitter and factory-installed AR6100e Microlite receiver * DS75 Digital Sub-Micro servos and G110 Micro Heading Lock gyro offer precise and powerful control * 420H brushless motor, 25-amp brushless ESC and 3S 11.1V 1800mAh 20C Li-Po battery deliver incredible power and performance * CCPM control with push-pull elevator and direct-to-swash aileron/pitch linkages Specifications: Type: RTF Electric 3D Mini Heli Main Rotor Diameter: 28.2 in (718mm) Tail Rotor Diameter: 5.3 in (135mm) Rotor Blade Length: 12.8 in (325mm) Height: 9.0 in (230mm) Length: 25.6 in (650mm) Gross Weight: RTF with Li-Po battery, 23.5 oz (665 g) Motor: 420H brushless outrunner, 3800kV ESC: 25-amp brushless Battery: 3S 11.1V 1800mAh 20C Li-Po Charger: E-flite 3S 11.1V LiPo Balancing Charger 1.8A Transmitter: Spektrum DX6i 2.4GHz DSM2 6 Channel Computer Programmabe Transmitter Receiver: Spektrum AR6100e Microlite receiver Servos: E-flite DS75 Digital Sub-Micro Servos (4) Gyro: E-flite G110 Micro Heading Lock. Guarantee Packaging
1.Car body material is zinc alloy. 2. 4 car doors can be opened. 3. Engine cover can be opened, and the components of the engine can be seen inside. 4. The boot cover can be opened. 5. The tyre behind can be seen obviously. 6. The second line chairs can be folded onwards. 7. Back mirror can be folded. 8. Internal clerestory plate can be pulled. 9. Steering wheel will drive the front wheels. 10. The oil box cover can be opened. 11. The decoration in side has emulational carpet, instruments and control board. 12. The driver seat can move forward and backward. 13. The car is vibration-proof.
1.Car body material is zinc alloy. 2. 4 car doors can be opened. 3. Engine cover can be opened, and the components of the engine can be seen inside. 4. The boot cover can be opened. 5. The tyre behind can be seen obviously. 6. The second line chairs can be folded onwards. 7. Back mirror can be folded. 8. Internal clerestory plate can be pulled. 9. Steering wheel will drive the front wheels. 10. The oil box cover can be opened. 11. The decoration in side has emulational carpet, instruments and control board. 12. The driver seat can move forward and backward. 13. The car is vibration-proof.
1.Car body material is zinc alloy. 2. 4 car doors can be opened. 3. Engine cover can be opened, and the components of the engine can be seen inside. 4. The boot cover can be opened. 5. The tyre behind can be seen obviously. 6. The second line chairs can be folded onwards. 7. Back mirror can be folded. 8. Internal clerestory plate can be pulled. 9. Steering wheel will drive the front wheels. 10. The oil box cover can be opened. 11. The decoration in side has emulational carpet, instruments and control board. 12. The driver seat can move forward and backward. 13. The car is vibration-proof.
Size:23.2*22*12.5 Weight:9g Speed:0.12sec/60fp Torque:f¦1.3kg Voltage:4.8v-6v One servo one polybag.
Length: 531 mm Height: 214 mm Width: 26.5 mm Weight: 827g/1.82lb Box
- semi-automatic (one shot per trigger pull) - capped semi-automatic (one shot per trigger pull with adjustable rate of fire limit) - nxl (complies with nxl rules with adjustable rof limit) - psp (complies with psp rules with adjustable rof limit) - millennium (complies with millennium series rules with adjustable rof limit) - cfoa (complies with cfoa rules with adjustable rof limit) - auto-response (fires on pull and release of trigger with adjustable rof limit) - training mode (helps train to achieve maximum trigger pull rate) - burst mode (fires a burst of 2, 3 or 4 shots per trigger pull with adjustable rof limit) - full-automatic (fires repeatedly when trigger is held down with adjustable rof limit) - custom rebound modes (multiple rebound modes can be programmed - each with their own unique ramping characteristics). Box
