Product Detail (1) Adopts Germany "Heusch" shears and blade.  (2) Adopts metal detectors, accurate measurement for metals in the cloth and protection the service life of shears.  (3) Deviation rectifying device is equipped in front of the machine, saving labour force and time and increasing efficiency.  (4) Hydraulic transmission, more stable , high-speed operation.  (5) The innovation of air suction technology, can drain shearing wool clean and fast.
Working width: 2000mm  2200mm  2500mm   Diameter of polishing roller: Ï?370mm Heating type: electrothermal tube Temperature polishing of roller: 5~250°C±5°C Delivery speed: 5~16m/min,inverters to adjust speed. Rotary speed of front polishing roller: 915r/min Rotary speed of rear polishing roller: 880r/min Heating power: 2x49.2KW(2000mm)2x52.2KW(2200mm)   Total power: 121.4KW(2000mm) 127.4KW(2200mm) 137.9KW(2500mm)
MB331X7036 Φ70 mm(36 raising rollers) is suitable for goral fabric, bottom cloth of fake leather, warp knitted industry.  MB331X7024 Φ70 mm(24 raising rollers) is suitable for blanket and woolen industry Product Details (1)Adopts quick-exchange belt and cleaning device, multifunctional expanding device, and 8 pieces of spare belts. (2)The belt are completely loosen when machine keeps off, easier to clean broken fabric, safe and high efficient. (3)Adopts blast cooling on electronical cabinet, avoid dust and waste getting in.  Critical components of World Famous Brand make stable quality and good performance Package & Delivery (1) We use export standard package, wooden case to delivery machines, adopt necessary measures on moisturep roof and anti-corrosion from air and sea.   â??â??â??â??â??â??
3kg yarn dyeing machine Parameters Technical functional requirements 1ã?�It is suitable for pre treating , dyeing and finishing of cheese, large package cheeseï¼?loose fibersï¼?top, flat belt and so on; 2ã?�Three 1kg cheese for once high temperature dyeing; 3ã?�Computer control heating,cooling, and constant temperature; 4ã?�Surfaces can be dealt with high temperature resistant stainless steel metallic paint,Interior can be dealt with Acid Cleaning Passion; 5ã?�Equipped with automatic valve . Main cylinder with liquid level controller , safety interlocking mechanism , and security protection can be set 80â??; 6ã?�Mechanical seal with silicone seal rubber of type O and PTFE gasket;
20-80g yarn or fabric dyeing machine Introduction Huaxia company designs a new generation beam cloth cheese tester with the advantages of double-cylinder dyeing machine. As a four-cylinder cheese dyeing machine with four cups in each cylinder, this tester is applicable to simultaneous dyeing for textile fabrics with weight with 20-80g and different bath rates. It will complete cycling of dye liquor without water pump with injection pressure adjustable. It allows dyeing, washing, reduction of washing, and neutralization, soft, dyestuff test and so on. Dyeing fabric and yarn: Fabric,Yarn,Acrylic,Polyester,Fiber,Cotton,Rayon,Knitted fabric,woven fabrics.
This machine is the preparative machine for rebar connection in construction work. Its main function is to forging the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end. Parameter: Upset forging machine: Mode: bdc-auto 1 Suitable rebar coupler: 16-40mm Voltage: 380v/3 phase Nom. Upset force: 2000kn Dimensions(mm):1300*680*1400 Weight: 850kg Hydraulic pump: Mode: xb6.3/80 Nom. Oil pressure : 80-90mpa Nom. Flow: 10.00l/min Power of main motor: 7.5kw Dimensions(mm): 800*550*900 Weight: 150kg
This machine is used to cut the thread for rebar end after cold forging.And it can also be used for thread rolling as well as bolt length above 500mm,unlimited length bolts. Parameter: Rebar diameter range:16-40mm Output speed reducer: 62r/min Electric motor power: 5.5KW Water pump motor power: 0.15KW Cutting head movement distance: 150mm or unlimited Out dimension(mm):1700*1000*1400mm Weight: 1200kg
TABER 5750 Abrasion Tester Standards: ASTM D3884 ? ASTM D1175 ? ASTM D1044 ? ASTM D4060 ? TAPPI T476 ? ISO 9352 ? ISO 5470-1 ? JIS K7204 ? JIS A1453? JIS K6902 ? JIS L1096 ? JIS K6964 ? DIN 52347 ? DIN 53109 ? DIN 53754 ? DIN 53799 TABER 5750 Abrasion Tester with CE certificate, also CE safety signs TABER 5750 Abrasion Tester Applications: TABER 5750 abrasion tester make performance test of any size or shape of any sample for abrasion tests with a contoured surface and the polishing surface characteristics of the product, highly desirable (such as: computer mouse and other computer or IT products plastic paint wear tests, used for plastics, auto parts, rubber, leather and textile, electroplating, free removal of components, paint products, printing, design, and other products. TABER 5750 abrasion testing machine Features: Used to evaluate the wear resistance, scratch resistance (single or multiple scratches) and color transfer of (usually abrasion discoloration or abrasion fastness) and so on. Dry abrasion test, wet abrasion test can be carried out. Abrasion Tester includes a host 5750, three disc-shaped weights 250g, 10 CS-10 and H-18 5 grinding rubber, 50 S-14 sandpaper and wear depth measurement etc. Linear abrasion tester detailed parameters: 11 kinds of optional moving distance Moving away from standard 0.2 ", 0.5", 0.61 ", 0.75" 1.0 ", 1.5", 2.0 ", 2.5", 3.0 ", 3.5" and 4.0 " It can be customized special mobile distance." Adjustable back and forth moving speed of 2 to 75 / min. Wherein 2, 15, 25, 30, 40 and 60 back and forth / min six speeds, it has six preset buttons on the operation panel The number of revolutions: Can be set up to transfer 999,999 (Note grinding rubber during this time may need to be replaced) Alternatively load Standard load range is from 350g to 2100g (250g weight generally random configuration of three weights.) • Variety of optional weight Abrasion Tester has five selectable moving distances: Moving away from standard 0.5 ", 1", 2 "3" and 4 " It can be customized special mobile distance Adjustable back and forth moving speed of 2 to 75 / min. Wherein 2, 15, 25, 30, 40 and 60 back and forth / min six speeds, it has six preset buttons on the operation panel TABER 5750 wear testing machine main features: Simulate real conditions of use: You can set the moving distance, speed, rpm, load and other parameters Choose a variety of different media and wear parts. (Optional sample fixing table and other optional accessories, with the scratch, the extent of damage was measured and resistances to alcohol testing, measuring coin scratch resistance and the like.) Ensure the stability and accuracy of the test: Grinding its general size and shape as the end of a pencil eraser head are made of high quality wear materials. Ensure the stability for test. Laser guided placement test samples to ensure the accuracy of the test. more view on http://www.abrasiontesters.com/taber-5750-abrasion-tester.html
Hexapod Tumbler Tester Standards of Hexapod Tumbler Tester: The Hexapod Tumbler Tester is a popular apparatus used in the evaluation of the appearance retention of carpets. Product information of Hexapod Tumbler Tester: Widely used in the evaluation of the appearance retention of carpets Can test with underlay underneath the carpet Provides a rapid method of test - completion within one working day Test Method of Hexapod Tumbler Tester: Specimens of carpet are fastened to a flexible backing sheet with double-sided adhesive tape. This assembly is fitted on the inside surface of the drum and can easily be removed at any stage for inspection of the specimens under test. If required, an underlay may be fitted beneath the carpet for direct comparison with normal use. The drive to the drum incorporates a reversing mechanism to give more realistic pile disturbance, and the required number of revolutions may be preset on a revolution counter. The 3.8kg tumbler has six polyurethane stud feet. The carpet specimens are treated for 2,000 revolutions, which takes approximately one hour. They are then taken out of the drum on their backing sheet and cleaned using an upright vacuum cleaner simulating practical usage. The specimens are replaced and the treatment repeated, normally six times, giving a total of 12,000 revolutions. After the final vacuum cleaning, the change in appearance is assessed against an appropriate set of ISO reference scales. _ Drum liner Technical Parameters:
The Zip Fatigue Tester is especially designed to test zips with Reciprocating Pull. 1. Standards of the Zip Fatigue Tester: QB/T 2171/2172/2173, BS 3084, AS 2332, NF G91-005, JIS S3015; DIN 3419-1, SATRA TM50 3795, FMVSS 302, DIN 75200, SAE J369; ASTM D5132, JIS D1201, AU 169 2. Applications: The Zipper Testing Machine is professionally designed for determining the zipper in the tension function of transverse and longitudinal that can sustain the specified number of reciprocating pulling operation. In the test, the machine drives the zipper pull head to perform reciprocating isokinetic movement in a speed of 30 times per minute, up to the specified number. 3. Product Information: Reciprocating stroke: 75mm; Width of horizontal clamping device: 25mm; Weight of longitudinal clamping device: 0.28~0.34kg; Electronic counter: LCD, 0~999,999; welcome to visit our web: www.qinsun-lab.com Packaging & Shipping 1. Packing: Packed by solid wooden case; 2. Shipping: Shipped by sea or by air, as you requested.
VGOTECH GSM ROUND CUTTER – GSM cutter is used for determining GSM of knitted, woven and non-woven fabrics. It is used to prepare the sample for calculating the GSM (Gram per Square) of fabric. With lock system for total safety. with 4Nos Imported Blades and 2Nos. Rubber Pads Specimen Area : 100 Cm2Specimen Diameter : 113 Mm (Approx)Type Of Cut : Standard box size: 10x10x9inch, weight-5kgs
Zig Zag Stitching Capability: The machine offers a wide range of zig zag stitch patterns, allowing you to add decorative touches, secure seams, and create unique designs. The zig zag stitch is ideal for finishing edges, appliqu�© work, and embellishments. Adjustable Stitch Width and Length: You have the flexibility to adjust the stitch width and length to suit your specific sewing requirements. This feature allows you to create precise and customized stitches, whether you are working on delicate fabrics or heavy materials. AutoLubrication System: The built-in automatic lubrication system ensures that the machine's moving parts are properly lubricated always. This promotes smooth operation, reduces friction, and extends the machine's life span. Regular lubrication also minimizes the need for manual maintenance. Flat Bed Design: The flat bed design provides a stable and spacious work surface, ensuring smooth fabric feeding and precise stitching. It offers a clear view of the sewing area, making it easier to guide the fabric and maintain accuracy. Speed Control: The machine comes with adjustable speed control, allowing you to set the sewing speed according to your preference and project needs. This feature ensures that you have full control over your stitching, even when working on intricate designs or delicate fabrics.
3 needle flatbed, high speed, high performance cover stitch machine. Suitable for any type of fabric and operation such as plain seam, covering, attaching elastic lace, taping, pocket facing, shell stitching ,tape binding, etc.
FC-1158 can match various types of shell lace with different thread lengths. By moving the number of needles to adjust the rod, we can easily change three different knitting styles, including one stitch, four stitches and eight stitches. The products are suitable for sewing machine of medium shell shape decoration such as sweater, coat, fashion, robe, slippers, blanket, cushion, towel, etc.
Spinning Machines covert cotton to yarn have machines from the biggest spinning machines in the world like Rieter and Trutzschler and Jengwei companies
Lac Button
MODEL : BKK-YKZ-ZH SIZE: 7000 2700 2000MM AC INPUT : 220V 2N PE POWER : 19KW AIR SUPPLY : 0.6 DATE OF PRODUCTION : 2020 NET WEIGHT : 1200 KG FULL- LOAD CURRENT : 50A FREQUENCY : 50Hz WE HAVE FACE MASK MACHINE IN UAE UMM AL QUWAIN FACE MASK MACHINE - 10 NUMBERS X 10000 AED = 100,000 N95 MACHINE - 2 NUMBER X 15000 AED = 30,000 EACH PIECES 10000 AED - 2750 USD (FACE MASK MACHINE 3LAYER 4LAYER 5 LAYER ) EACH PIECES 15000 AED - 4100 USD ( N95 MACHINE )
This Automatic Cheese pipe cleaning machine is designed looking at industry requirements of day to day manpower problems & increasing cost. This Machine is user friendly to operate even it can operated by unskilled operators. Compared to traditional or old method of using blade or hot write which can even risky and damage or burn the hand of worked, this waste yarn bobbin cutting machine is designed in such a way that no critical parts are open which ensure safety of the operator.
Weaving Textile projectile sulzer Loom Machine spare parts Fast opener Loader opener Guidedrill shoe link reternal
Technical Parameters: 1.Nominal reed width(cm): 150,170, 190,210, 230,270,280,290,300,320,340,360. 2.The Effective reed width(cm): Normal reed width: 0---65cm( 230cm); 0---85cm(>230cm). 3.Weft Selection: 1 color 2 colors 3 colors ? 4 colors 4.Starting mode: Motorized spindle Super start motor drive(Optional) 5.Motor capacity: 2.2KW 2.7KW 3.0KW 3.7KW 4.5KW 6.0KW 6.Running operation: One-hand operation button Two-hand operation button Pump;Single pump Double pump 7.Nozzle:Normal Nozzle, "U" shaped Nozzle 8.Length measurement and weft storage:Electronic Length Measurement FDP Mechanical Length Measurement RDP 9.Crank shedding:4-piece type 6-piece type 8-piece type(Optional) 10.Positive cam shedding:6 8-10 piece type 12 14 piece type(Optional) 11.Positive dobby shedding:16 piece type 12.Diameter of the beam flange: 800mm, 914mm(optional), 1000mm(optional) 13.Maximum tension:500kg 1000kg 14.Voltage:380v 415v 480v 15.Beating-up:four-linkage beating up (standard configuration is common hollow beating up shaft,optional solid beating up shaft) 16.Scissors and feeler:mechanical ceramic scissors; Optical fiber feeler; Photoelectric feeler(Optional) 17.Warranty:1 Year 18.Lead time:15-30 Days
