High Speed Single & Twin Track T-shirt bag making machine
Model
HSP-VX 450 Delta
HSP-VTX 350 Delta
Max Speed = 240 Strokes/min = 480 Bags/min
Suitable for HM-HDPE Film of 10-50 Micron
Completely Automatic machine equipped with tension control system, Edge Guiding system, Auto Loading of Rolls on Unwind wiht Air shafts
The machine Seals the bags and cuts them with a Hot Knife and makes bunch of 50. The Bunch is automatically taken forward to the Online Punching section where the Handle is punched and you get the Finished product on the Auto conveyor. The scrap of the handle is also removed seperately.
Features:
1) created from a high impact plastic
2) the 4 panels are joined by specially designed living hinges that have undergone severe testing to insure longevity
3) the patented ventilated panels are strategically designed to reduce static and
Pull back
4) features 5 bumpers, 4 with rubber cushions that allow for easy handling and non-skid performance on countertops, washers, or any surface you choose to fold on
5) rectangle for easy storage
Open dimensions: 71 x 59cm
Weight: 730g
Folding size: 59 x 22.5cm
5581 Textile Machinery Equipments Suppliers
Short on time? Let Textile Machinery Equipments sellers contact you.
Characteristics
JC-980 High Speed fancy Yarn Crochet Machine controls the device by changing inlay methods to produce all kind of pattern yarns. The machine speed is controlled by an inverter, so that It can starts at a slow speed with stepless changes, and fastly breaks to low speed to meet the demand of testing process,The machine is divided into three main sections,as follows:(mm)
1,Main machine(L*W*H):1750*1950*1750
2,Winding section(L*W*H):3000*2800*2400
3,Yarn frame(L*W*H):4200*1880*2750
USAGE:
JC-980 Model is a High Speed fancy Yarn Crochet Machine. The machine first knits with warp and weft yarn, then cuts the weft yarn to form the final yarn. or it straightly knits belt yarns out of warp and weft yarns.JC-980 machine is suitable for all kinds of fibres , both natural fibres(wool,silk.cotton ,etc.)and synthetic fibres(polyester,acrylic etc.) These materials can de dyed before or after knitting,in accordance with requirements.The appearance of the fancy yarn is the core yarns knitted into rings and the weft yarns used as its mattress. the finished yarn is of flat shape.
MAIN TECHNICAL PARAMETERS :
1,Operational Width:762mm(30inch)
2,Gauge needles per inch:15,18,20
3,Weft needle:2sets
4,Stitch density:5-20S/cm
5,Link chain:12-50sections
6,Main shaft speed:Max1500r/min
7,The girth of rack frame:170cm
8,whole machine power:1.56KW
9,No. of bobbins:520 pieces
10,Gauge of yarn spindle:200mm
Uses: can make different kinds of clothes, beddings, shoes, caps and the laces of some ornaments
Materials: cotton, thread, hemp, chemical fibre, silk
spindle Number:64-96
Max width of fabric: 6.8cm-9.8cm
FM Rotational speed: 5-280r.p.m
Motor Power: 1.1kw
Weight: 64: 1140kg- 96: 1450kg
Size: 64: 2000*1256*1750
Application:
The machine is suitable for spinning wool, cotton, polyacrylonitrile fiber, polyamide fiber, polyester.
Through rotor 2-3 plies of yarn are cut into short piles and gripped into the 2-ply-core-yarn, then luxurious Chenille yarn is obtained
Main technology parameter
Machine type JC-80
Spindle Gauge 200mm
Spindles per frame The spindles can be combined to 80 on the basis of 20spindles
Internal Diameter of Ring 112mm
Lift Stroke 280mm(can be adjusted)
Lift Speed Adopt imported inverter and PLC(programmable controller)to control it
Count1-7Nm
Roller Diameter 29.5mm
Spindle Speed 4500-5400RPM
Rotor Speed 5200-16500RPM
Production Efficiency 5-10.5m/min
Twist Direction Chenille yarn is S twist,Z twist is for customers option
Drive Style Lift motion is driven by one motor
Total Power 4.1kw-3.0kw ( 20 spindles)
Overall dimension Upon the basis of 20spindles 4500*1700*2600
Every 10 spindles 2040*1700*2600
Air-absorb equipment can be installed according to customers requirement
Type JB-7A JB-10A JB-13AGauge 7 10 13Operating Interface LCD Control Panel Keypad InputStop Motion Yarn Breakage, Dropping Failure, Motor Overload, Elastic Yarn Breakage,
Direction Error, Run Complete, etc.
Power Source 3-phase,200V,450VAGross Weight 250kgOptions 2-colour device6-colour KnotterSize Changing DeviceCapacity 360 pairs/dayMain Products: It can knit different styles of glove su
Reed space 30ö to 200ö
Reed type Fast / loose
Type hand side Right/ left
Frame The complete frame of loom is fitted with the dowel pin at different joints of binders, crank bushes and tappet bushes in order to facilitate foolproof align-meant while erection of the loom.
Crank shaft 50mm machine forged and grinded edges provided with cast-iron / gunmetal bushes / self-lubricating bushes (optional). Extra middle support provided for rigidity over 60ö reed space loom
Crank arm Made from cast iron / gunmetal bushes / self-lubricating bushes and fitted with gunmetal / self lubricated bushes (optional) and reinforced by steel strapping
Tappet shaft Superior quality tested I.S. standard bright bar moving on cast iron / gunmetal bushes / self-lubricating bushes and fitted with gunmetal / self lubricated bushes (optional) fitted brakes.
Gears Hob-cut helical gears to give smooth and noiseless working & uniform quality of fabrics. Double drive for loom above 84ö reed space
Picking Under-picking system having chilled picking nose and picking bowl perfectly matched and made up of special quality metal to give longer life.
Shedding Twill / twin / dobby / jacquard
Beating Slay is carefully made from selected good quality of seasoned teak wood & shisham wood. Race board fitted with polished slay cap is incorporated in the loom which ensures suitable flight of the shuttle and correct beating.
Shuttle box 1x1, 1x2, 2x2, 2x4, 4x4, Pick-N-Pick
Take up Seven wheel take motion
Let off Negative / semi positive / Positive
On request Extra beam attachment for special fabrics
Push button system driven by the individual motor drive
Weft stop & Warp stop motion
We have a well equipped R&D in which every year we develop new products. Recently we have developed some extra ordinary products for Textile Industry. Here we called these products as Rug Loom & Carpet Loom. Benefits of both are given below.
Rug Loom: - Long time ago the making of daris / mats / floor coverings were only on handlooms. Which was on older technique? In our new era, new technologies are developing every where. Our science and revolutionary technology has proved their selves in all working fields. Such as telecommunications, air craft, telebrands, medical line etc. Since each field is growing with advanced technology an newly inventions. But our handloom industry still uses older technique. Which are very pity / miserable?
We development a ôRug Loomö by which all the products of handloom are making on this loom instead of handloom. On this machine all motions which are required to make any handloom products can be operated automatically. That means no need to push extra efforts of man power. Now it is easy & cheap to make Handloom items on our Machine.
Carpet Loom: - It was mysteries for a long time that can carpet were made on loom? But our group ôDashmesh Jacquard & Power Loomö has occupied it like a challenge and the hard of our R&D team has proved that nothing is impossible in this world, and made a revolutionary product called ôDashmesh Carpet Loomö now all type of carpets can made on this loom. On this machine no need to done any act by manual because our machine has excellent features for Shading, Picking, Beating & Cutting. With these facilities carpetÆs finishing & production capacity is much increased than the handloom made carpets.
Model: - wt-05
Working width 2200 mm
Drum Solid steel drum
Drum circumference 2500 mm
Cone height Fix cone height
Cone length 1300 mm
Beam flange 600 û 1000 mm
Warping motor 05 hp
Beaming motor 15 hp
Warping speed 600 mtrs / min
Beaming speed 100 mtrs / min
Doning û doffing Hydraulically (straight slide)
Drive 15 hp a/c inverter drive
Brakes Power failure & hydraulic band brake
Creel 400 ends revolving creel with auto stop motion
Model: - wt-07
Working width 2200 mm
Drum Solid steel drum
Drum circumference 2500 mm
Cone height Fix cone height
Cone length 1300 mm
Beam flange 600 û 1000 mm
Warping motor 05 hp
Beaming motor 15 hp
Warping speed 600 mtrs / min
Beaming speed 100 mtrs / min
Donnning û doffing Hydraulically (straight slide)
Power supply 440 v, 50 hz, 3 phase
Drive A/c inverter drive
Plc controls Various controls
Brakes Power failure & hydraulic band brake
Creel 400 ends revolving creel with auto stop motion
Carpet Loom: - It was mysteries for a long time that can carpet were made on loom? But our group ôDashmesh Jacquard & Power Loomö has occupied it like a challenge and the hard of our R&D team has proved that nothing is impossible in this world, and made a revolutionary product called ôDashmesh Carpet Loomö now all type of carpets can made on this loom. On this machine no need to done any act by manual because our machine has excellent features for Shading, Picking, Beating & Cutting. With these facilities carpetÆs finishing & production capacity is much increased than the handloom made carpets.
A) cotton ring spinning plant
B) ring frames
C) open end spinning plant
D) auto winder
E) flat bed printing machine
F) sizing machine
G) air jet looms, water jet looms and rapier looms
H) yarn dyeing plant/used but reconditioned/korean origins
- type: cone (=cheese), hank, etc.
- materials: cotton, polyester, cotton cum polyeter, etc.
I) fabric dyeing & finishing plant/used but reconditioned/korean origins
- type: vertical wiinch dyeing, rapid dyeing, high-soft dyeing, etc.
- materials: cotton, polyester
Our company has two cold rolling special steel produce lines , specialty rolls kinds of material for saws , to improve the quality of cotton saw start with the material technology.
We will give you a seemly price if you interest in our products .
Hanwu cotton machinery corporation has specialty cotton saws produce line , produce the saw used for main trend cotton machinery all over the world . The company has advanced detection equipment and perfect quality management system , production capacity is three million pieces per year.
The company has two cold rolling special steel produce lines , specialty rolls kinds of material for saws , to improve the quality of cotton saw start with the material technology.
Extend the used life and improve the competition of the product.
Our company has many kinds of space block, which is manufactured by special material and technology, big density, high strength and fine precision.
Good quality and competitive price! we will give you a favourable price if you interest in our products .
5581 Textile Machinery Equipments Suppliers
Short on time? Let Textile Machinery Equipments sellers contact you.
