This automated ball fiber machine is used for polyester ball fiber making, opening and filling into pillow, cushion etc. High degree of automatic, adopt PLC control system and auto clamp, so whole line only need 2 operators, save labor cost, simple operation and reduces the dependence for operators.
The toy stuffing machine is used for pillows, cushions and sofa pads, large size plush toys soft stuffing productions.
The suitable material is 2 or 3 dimensional hollow conjugate siliconized polyester fiber that shorter than 100mm length.
Automatic raw material feeding conveyer sends the raw material into the opening component automatically which will save a big labor cost.
Main technical parameter:
1.Capacity: according to the filling weight and production material difference
2.Dimension: 3000X2500X2500mm
3.Voltage: 380v 50Hz 3phase
4.Power: 3kw
5.Weighing error: 1g
6.Air pressure: 0.5-0.8MPA.
This pillow filling and sealing machine has been researched and developed according to our customers experience and advise from their daily operation, so and their requirement; also based on the automatic theory of the textile equipments.
Main technical parameter:
1.Capacity: 7pcs/min, 360-420pcs/h
2.Installation area: 13000X5000X2300mm
3.Mixer capacity: Continuously by the opened feeding storage.
4.Power: 15.6kw
5.PLC: Siemens brand, More option: AB, Omron
6.Air pressure: 0.2Mpa
7.Operator need: 1 operator
8.Weight: 4.2MT.
Technical Specifications:
Cutting length: 180-220cm
Cutting width: 160-220cm
Cutting thickness: up to 6.5cm of compressed fabric.
Max speed: 100m/min
Acceleration: 1g
9KW+15KW
Operating Temperature: 10¡ãC-40¡ãC
Operating Humidity: 30%~80%
Weight: 4000kg
Main Features & Functions:
Digital control of all components, to obtain maximum precision and possibility of feed back in real time
Self-learning system to obtain automatically maximum efficiency
Possibility to optimize energy consumption
Auto-diagnosis system to identify and advice eventual errors or anomalies
Clever vacuum system to maintain automatically the level of suction required, improving the cutting quality and optimizing the consumption
Washable filter for vacuum pomp
Automatic calculation of cutting window and route optimization
Full compatibility with other systems by standard file ISO/ANSI
Two ways off-loading conveyor
User interface easy and intuitive with possibility to display in real time cutting process and production data.
Laser engraving & cutting machine is used to cut cloth, leather, rubber, wooden product, bamboo, crystal, Plexiglas, ceramic tile, jade, resin, acrylic and other materials.
With imported components and advanced design, Laser engraving & cutting machine performs perfect functions:
1 High cut precision: the max deviation<0.05mm
2 Fast cut speed: 1000mm/s
3 Connect with CAD software
4 Graphic formats supported: BMP, GIF, JPEG, PCX, TGA, TIFF, PLT, CDR, DMG, DXF.
5 Auto feeding material system improves work efficiency.
6 Field leading continuous and fast curve cut function.
7 Advanced color management supports various colors.
Imported components:
1 Imported reflecting and focus lens ensure the high precision of the laser.
2 Imported straight balanced guide
3 BERGER NAHR 3-phrase stepping motors and power drives.
Laser tube type: Hermetic and detached CO2 laser tube, RF metal laser tube.
Engraving & cutting area(mm): 600,900, 900,600, 1200,600, 1400,800, 1300,900, 1900,900.
* Efficient inspection of medium & heavy quality fabric.
* Efficient inspection through top & bottom illumination.
* Tensionless movement of fabric on inspection table.
* Full forward & reverse run of fabric.
* Speed variable from 0 v 50 mtrs/ min.
* Compact & crease free rolling on winding tubes.
* Max. Roll dia. Up to 1000 mm.
* Length measurement by reputed counter meter.
* Straight & uniform roll winding through efficient selvedge guider.
* Operator friendly, improves productivity reduces labour.
* Speed variable from 0 to 50 mtrs/ min.
* Compact & crease free rolling on winding tubes.
* Max. Roll dia. From 300mm to 1000mm.
* Length measurement by reputed counter meter.
* Straight & uniform roll winding through efficient selvedge guider.
* Operator friendly, improves productivity, reduces labour.
* Most accepted machine for small swatch and sample cutting
* Sizes available from blade width 14 inches up to 32 inches
* Equipped with 1 no. Serrated blade and 1 no. Cutting board
* “polyurethene” cutting board for extended life of blade
* Safety is equipped with p.L.C controls for two-hand safety operation.
* Model ‘perfect cut’ is equipped with electro mechanical drive.
* Solidly built table is provided with millimeter graduation
* Machines manufactured following the safety classes of eu.
* M.S. Rigid frame to with stand vibration
* Maximum of 2 inches of fabric sample can be cut in one quick cycle
* Proxy sensor mechanism provided to hault the machine automatically after single blade stroke
* Blade reverse & forward provision to set the blade at desired cutting point
* Most economical machine in its range.
A186L
Production rate (g/m): 3.5-6.5
Output (kg/h): 40
Working Breadth (mm): 1020
Multiple of Elongate: 67-120
Working diameter of licker-in (mm): 250
Working speed of licker-in (r/min): 980(for man-made fibres) 1070(for cotton)
Working diameter of Cylinder (mm): 1289
Working speed of Cylinder (r/min): 330(for chemical fibre) 360 (for cotton)
Working diameter of doffer (mm): 760
Working speed of doffer (r/min): 21.3-38.2
Root of cover plate (working cover plate/total no. of cover plate): 40/106
Speed of cover plate (mm/min): Purified Cotton 177 214 266
Chemical fibre 81 98 122
Applicable cotton item canister (mm) (diameter¡Áheight): ¦Õ600¡Á900/¦Õ600¡Á1100
Dust cleaning apparatus: Cylinder, doffer trigonal area, licker-in cover,
Air volume(continuously): 1300cube meter/h
Air pressure: 500-600pa
Total power: 4.4kw
Size (length¡Áwidth): 3809x2092mm
Weight (ton): About 4.5 ton
Character & Power: Machine Width: 1.6, 1.8, 2.2, 3.0m
Roll weight (Maximum): 100kg
Roll diameter (Maximum): 60cm
Spreading height: 25cm
Maximum speed per minute: 80m
Operator side: Right (Normal)/Left
Voltage: Single phase, 220v/50Hz
Power supply: 1.7kw
Standard Equipment:
Loosing Fabric Device Automatic loading and unloading rolls Automatic Edge Controlling Device Automatic lifting Device Automatic Fabric Cutting Device Spreading Layers Counter Clamp Device Digital Touch Screen Security sensors emergency stop Other technical characteristics Ability to program all steps in a spread Diffuse reflection sensor ensure fabric edge alignment Encoder counter ensure high accuracy Automatic start checks control when machine is switched on Four-wheel drive (2*2) Self-adjusting brakes ramp according to speed of machine and programmed acceleration Stop when material is used up Spreading any kind of fabric: Knitting fabric and woven fabric Unidirectional cutting spreading and Zigzag spreading Optional Devices Folding platform Zigzag device & fixed clamp together Air-blowing table Power track Operator platform Mobile table Automatic loading device Unfolding/spreading device.
Model RP-MJ135 RP-MJ180 RP-MJ220 RP-MJ300
Max. plotting width 138cm 183cm 223cm 303cm
Max. paper width 140cm 185cm 225cm 305cm
cartridges 24
Receiving paper system Automatic paper receivin
Max paper weight 35kg
Max plotting speed 72square meters per(two cartridges),
140square meters per(four cartridges)
Ink box type HP45 ink box
Plot precision 0.025mm
Paper 30-120g paper
Communication USB port, LAN port
Data format HPGL
Motor type Servo motor
Power AC220V(110V)/50Hz+10%
Storage temperature -20-50
Working temperature 0-40.
Al-hamd enterprise, is pleased to offer you the below; brand new, high quality pp spunbond nonwoven production line. More than 80% of Chinese textile companies are using this brand.
Application
The line is used to produce PP nonwovens through spinning, web forming and solidifying by calender. The products can be used in the fields of health care, hygiene, hospital aprons, kitchen aprons, kitchen towels, construction fabrics, waterproofing material, used in bedsheets & handbags, packing material, geotextile or household material, such as disposable and wearable material.
Main Technical Data
Width: 1600mm, 2400mm, 3200mm
Titer of single filament: 1.8 dtex - 2.5 dtex
Output: Single beam: 1500 tons/anum ~ 3000 tons/anum
Double beam: 3000 tons/anum~6000 tons/anum
Web Weight: 10g/m² - 150g/m²
Mechanical speed:
Single beam: 150m/min
Double beam: 210m/min~350m/min
Process Flow
Polypropylene (PP)chips and additives -> dosing and mixing device -> screw extruder -> (extruding, melting and filtering) -> spinning machine -> cooling and drawing system web spreading machine -> calender -> winding machine -> splitting machine -> finished product.
Features
-- Suction, dosing and mixing device is controlled by inverters with high precision and reliability; automatic alarm is realized in case of unsuitable material level.
-- Screw extruder adopts high-precision helical gear reducing box and tri-closed loop electrical control, so that it works at high precision, high reliability, high safety, and long service life.
-- Melt distribution line is heated by electricity and wrapped with insulation material, which features short melt flow distance and automatic control for heating system.
-- Spin beam is of integral slot structure with special melt distribution chamber to ensure even melt distribution. The integral spinneret is adopted to achieve uniform filament distribution.
-- Quenching system adopts double-sided symmetric blowing structure, in which the air duct is fixed with multi-layer air rectifying device.
-- Drawing duct adopts slot type, in which the filament is drawn by air flow, with the widths of the lower drawing duct and the diffusion duct being adjustable.
-- Web spreading machine comprises main driving system, traveling lattice, frame, suction duct, correcting device, tension device and son on.
-- Suction duct and diffusion duct are separated with the surroundings by brush and sealing roller, which forms a single control system to meet the requirements of different processes.
-- Recycling system.
Single carriage single system. Digital technology is adopted to realize transfer, tuck, pointelle, jacquard, open narrowing and other regular patterns. Basic knitting fabric, multi-color irregular jacquard, cabling and other weft knitting fabrics can be knitted. It is applicable to weaving sweaters, coats, scarves, caps and cloth accessories which are made of real silk, spun silk, compound silk, wool, acrylic, etc.
Single carriage three system. One working system is added on the basis of the double system. Three system can work together or individually, thus improving production efficiency greatly. It is designed for jacquard fabrics and shows higher work efficiency. It is applicable to weaving coats, scarves, caps, artware and cloth accessories which are made of real silk, spun silk, compound silk, wool, cashmere, acrylic, blends, yarns, etc.
Single carriage double system. This series is the computer flat knitting machine with take down comb. Advanced scissors, clips and take down comb are added on the basis of the double system series. The machine includes two scissors and four clips which are controlled by the six motors separately. The program instruction can be executed simultaneously or separately to increase the production efficiency and reduce the waste of yarn. The take down comb adopts closed U type compound needle to hold and knocks over the yarn reliably.
