Find Verified Textile Chemicals Suppliers, Manufacturers and Wholesalers

Seaweed powder



In 25kg net woven bag with plastic bag inside.

Textile grade for textile printing.



In 25kg woven bag lined with plastic bag inside

Cationic softener

Amino silicone softener

Penetrating agent

Nonionic softener

1.The Ebony Black has excellent deep coloring effect and applies great softness at the same time. It is cheaper in price than other deep coloring agents and does not have any problems when used in Tenter padding, Net dry, or Kuster mangle machines, and it is very convenient.
2.The Ebony Black maximizes the deep coloring effect especially for disperse dyes.
3.The Ebony Black is a special chemical compound type deep coloring softener agent, and it has excellent deep coloring effect to the ITY, BSY, Deep color yarns, and normal filament yarns.
4.The Ebony Black does not have any problems which are sometimes made by folds or wrinkles during the padding process.
5.The Ebony Black is nonionic, and it has excellent blending usage with other agents and does not have any side effects.

Jinbest General Pigment Printing Colorant is the first developed product. It has continuous to improve from time to time.
Now it contains no Formaldehyde, NPEO, Heavy Metals etc. Only the Azo can not be excluded completely, but is continuously modify. Be notify about this before used the products.



30kgs/drum

Herewith the technical information for this series below:

1. Formaldehyde Free: comply DIN 53315 regulation.
2. Nonyl-Phenol Ethylene Oxide Free.
3. Azo: free from 24 item Azo in textile.
4. 10 Extractable heavy metals: comply with regulation.
5. PVC plasticizers(Phthalates): comply with regulation.
6. Organic Tin compounds: comply with regulation.
7. Light Fastness(1.0% x 40AFU): grade 4 at least.
8. Dry heating Fastness(180oC x 30 secs): 4 grade at least.
9. Color migration Fastness into PVC foil: numerous products are grade 4 at least.
10. Jincolor can provide cdertified test reports.



30kgs/drum

Jinbright water base universal colorants or called resin free pigment concentrates, rfpc, is a high concentration
Aqueous pigment dispersions. It does not contain any resin and provide high coloring strength with excellent fluidity.

Jinbright water base universal colorants used high quality pigments, excellent wetting and dispersion agents.
Those bring this series a superior fastness on light and climate. This series can rapidly disperse in any adaptable ratio in
Multiple choice of water base polymer or emulsion products. This series can be used in interior or exterior paints.
It is excellent in adaptation, color shade, and stable in long term period.

Jinbright water base universal colorants is characterized by fine particle, well dispersion. It provides feasible
Viscosity and stable quality during operating and storage process, easily pourable and pumpable emulsion type
Pigment.

Jinbright water base universal colorants contain low-voc, and no ethylene golycol. It is non-formaldehyde,
Npeo-free, and aromatic-free, also free from extractable heavy metals.


30kg/drum

Jinbest Plastisol Ink with the excellent property and colorful performance, are supplied ready-to-use direct from can, they are available in following 3 series for satisfying customer's various applications. Additionally, in order to meet respective needs, Jincolor also provide Plastisol Colorants, which facilitate customers themselves to alter the color shade and color strength easily for their own desire.

Brilliance Series -

This series is formulated as an economical Plastisol Ink, recommend for printing directly on 100% light colored cotton. It is capable to create fine lines and delicate patterns, provides a beautiful luster; vivid color shade; good stability, the finish can be flat surface and soft touch feeling.

Opaque Series -

This series is specially recommend for printing on Dark colored fabrics, its opaque character could simply cover the dark under-layer, and lies colorful patterns on it.

￭ Photo-Tone Series (4 Color Process Ink) -

This series could be used on wet-on-wet printing, it comprises 4 essential colors-yellow, red, blue, and black, specific for 4-Color Press images. For obtaining the designed tone, it requires to be printed only onto white or light colored fabrics, the undertone shall alter the expected color shade otherwise.

Screens : To gain sharp and fine patterns, we suggest you to choose 120 meshes screen , but if you apply for three-dimensional effects or stronger color shades, less meshes screens or thicker screens would be recommended, but the maximum is 100 meshes.

Modification : Jinbest Plastisol Ink could be adjusted to meet your specific viscosity and fluidity by adding only a small amount of Reducer PL-T10, but if you like to reduce the color concentration, please add Clear PL-T01 to achieve this purpose only.

Curing : Jinbest Plastisol Ink will not air dry and must be heat cured, which requires curing temperature reaches 110~120óJ / 3~5 Minutes. Curing can be accomplished via a conveyor dryer, flash curing unit, or simple infrared heat source.

Detergent : When wash-up, instance biodegradable agent or turpine oil are recommended.

Storage : To store our plastisol ink under general room temperature. Prolonged exposure to high temperature might Occur the gelation.



Brilliance Series & Opaque Series: 10kgs/drum
Plastisol Ink Colorants: 10kgs/drum
White PL-W01: 30kgs/drum
Clear PL-T01: 25kgs/drum
Reducer PL-T10: 20kgs/drum

Ps-47
Application
Sizing of filament yarn

Chemistry for performance

òexcellent abrasion resistance, adhesion, flexibility properties
òno blocking, easy desizing, good hard water solubility
òworks at minimum 25% less size pick-up than acrylics
òhigher loom efficiency
òsuitable for air jet and water jet looms

Chemistry for economics

òhigher efficiency on loom at lower pick-up
òlesser material requirement, smaller storage space and reduced inventory cost


Physical properties
Form/colour/solid content/ph of solution/solubility: Granular form/dark yellow/100%/5 û 6.5/completely soluble in hot water

Guide recipe

Ingredients
Quantity
Ps-47 100 kg
Lubricant 1.5 û 2 kg (if required)
Size concentration 10 - 12% on ri meter
Pickup (without oil) 5 - 5.5% on filament yarn
7- 8% on texturised yarn


25 kg paper bag

R-PVS-100

Application

Sizing of 100% Cotton Yarn, Denim, Polyester Viscose and Polyester Cotton
Partial / Full replacement of PVA, Acrylics, CMC & other binders by polyester size for better economics & performance
Chemistry for performance

òSizing binder with highest abrasion resistance and flexibility
òHigh performance polymer for higher loom efficiency
òLow viscosity size, Better penetration. Less hairiness
òMinimum loss in elongation. Higher gain in strength & good penetration
òBetter surface smoothness and softness after sizing
òLess dropping and lesser warp breaks
òEasy desizing than PVA
òCompatible with starch and other binders
òLesser effluent load because of lesser dosage
òCan be used like PVA by directly adding to the size mix during cooking for solubilization

CHEMISTRY FOR ECONOMICS

òFull 2 part of PVA can be replace by 1 part of R-PVS-100 Upto 20kg PVA in Size recipe.
òPartial replacement above 20 kg of PVA in Size recipe


Physical properties

Form/Appearance/Colour/pH of Solution/Solid Content/ :
Solid/Free Flowing Powder/Yellow to Greenish/4 û 5/100%


Pack Size:25 kg Paper Bag

Ran-size xl
Application
For sizing of cotton, polyester-cotton, polyester viscous blended yarn and psf yarn

Chemistry for performance

ò Excellent wetting and coating capability
ò High molecular weight co-polymer
ò Easy desizing
ò Higher viscosity size
ò More cost effective than conventional acrylates

Chemistry for economics
òlower dosages


Pack size
35 kg

International standards

25 kg

Weight: 35g/m2 (available) or as required
Width: as required
Construction: 100%polyester with polyamide powder
Color: white or as required
Physical property such as tensile strength, elongation at break etc are meeting global automotive specification.
Application: mainly for car, bus and truck's headliner backing


international standard packing

Softener flake

High concentration series
1, raising agent f
2, lustering and smooth softener 2231-80%
3, amino silicon emulsion2233(b)-80%
4, smooth silicon emulsion 2237(c)-80%
5, super softening agent 2253d-80%
6, organosilicon softening agent 2254+-80%
7, dry and bulky softener 2264c-80%
8, bulky softening agent 2265c-80%
9, silicon emulsion for overflow machine 2290-80%
10, hydrophilic silicon emulsion ls06-80%
11, softener flake s200
12, softener flake s300
13, low-yellowing softener flake s400
14, anionic softener flake s900
15, nonionic softener flake v12
16, amphoteric softener flake v100
17, liquid softener 666



Packaging and storage
Packaged in complex bag with plastic inner, 25kg net per drum .Stored in cool and dry warehouse , away from oxides, light and heater .Sealed after use .

1,raising agent F
2,lustering and smooth softener 2231-80%
3,amino silicon emulsion2233(B)-80%
4,smooth silicon emulsion 2237(C)-80%
5,super softening agent 2253D-80%
6,organosilicon softening agent 2254+-80%
7,dry and bulky softener 2264C-80%
8,bulky softening agent 2265C-80%
9,silicon emulsion for overflow machine 2290-80%
10,Hydrophilic silicon emulsion LS06-80%
11,softener flake S200
12,softener flake S300
13,low-yellowing softener flake S400
14,anionic softener flake S900
15,nonionic softener flake V12
16,amphoteric softener flake V100
17,liquid softener 666

Offer sodium alginate

Sodium alginate is derived from seaweed and is the most desirable thickener for procion mx dye. It is used to thicken dye for screen printing, painting, or to control spreading.
We have two kinds: high viscosity, low solids for cotton, and low viscosity, high solids for silk. The silk one allows you to draw finer lines but requires you to use more.
You can use them interchangeably. Specify which one you prefer.
Sodium alginate:in printing and textile industry
Industry grade (department of agriculture sc/t3401-1985)
1.Viscosity: 50-1200cps
2.Grain size:30-60mesh 100% pass or as per contract stipulateed
3.Moisture %: 15 max
4.Ph : 6.0-7.5
5.Ca content %: 0.3 max
6.Ash content % : 20.0-24.0
7.Transparency cm: 3 min.
Packing : in 25kg woven bag lined with plastic bag

Welscour-lf

Appearance ;pale yellow clear viscous liquid
Ph 2% in d/w : 7.5 - 9.0
Ionic nature : nonionic
Solubility : dispersible
Solids : 85%
Wetting time : 15 ~ 20 seconds (1 gms/l )

50/200 kgs hm hdpe containers