Input voltage: 100-240v ac 50-60hz Power factor: >0.95 Out put voltage: 52 v dc Led consumption: 120w System consumption: 135 w Led luminous efficiency: 80~100/110~120lm/w Color temperature: 4000k-5000k Color rendering index: ra>75 Operation enviornment Working temperature:-40½+55: Humidity: 10%-90% Ip rating: ip65 Working life: > 50000h Body& shade material: aluminum alloy Size: 774x330x105 mm Net weight: 12.8kg Ctn+ú+únúnúSúsúeúGúnú°
Input Voltage: 100-240V AC 50-60HZ Power Factor: >0.95 Out put Voltage: 52 V DC LED consumption: 120W System consumption: 135 W LED Luminous Efficiency: 80~100/110~120LM/W Color Temperature: 4000K-5000K Color Rendering Index: Ra>75 Operation Enviornment working temperature:-40íµí½+55íµ: Humidity: 10%-90% IP rating: IP65 Working Life: > 50000H Body& shade Material: Aluminum Alloy Size: 774x330x105 mm Net Weight: 12.8KG íí product size:774x330x105 mm packing size:778x334x109 mm Weight: 13KG
LED street light, is a new, energy-saving product that utiliaes high power led's as light source, it can be powered with the optional solar panel kit with the led color spectrum, there is no ultraviolet light, no infrared rays, no heat, and no radition produced.As a result, oue led street light is a conventional "green " lighting source.
Body: die casting aluminum Reflector in pure aluminum Heat-resistant silicon rubber seal ring.
Solar Street Light Configuration Solar Module60W-400W Mono or poly solar module Storage BatteryMaintenance-free lead-acid storage battery Light Source Solar tri-phosphor Energy Saving Lamp/Electrodeless Magnetic Discharges Lamp/LED·+power:15W-90W. Controller Micro-computer fully automatic control. Light Pole Hot galvanized steel tube, plastic-spray or fluorocarbon Coating in the surface. Working Time 6-12hours/Day. It can work normally for 8 days at most when itf+s rainy or cloudy in session The height of all the products could be specially produced according to clientsf+ detail requirements.
110W LED streetlight Can be used directly in 100 to 240V AC Long lifespan High brightness Energy saving Environmental-friendly High stability The light body uses aluminum die casting technology and the matched glisten cup was vacuum-plated aluminum on its appearance The glisten cup has the advantages of less astigmatism, even brightness, besides, it can beam long distance and has good light efficiency The reflector adopts good quality toughened glass, all parts uses stainless steel material and can guard against dust, water and rust Can be used together with solar panel and wind power, greatly reduce the cost of installation and maintenance and to be the ideal replacement of traditional LED streetlight Usually used in main street, branch road, park, uptown, school, and others Product strength: Great illuminating angle Accurate constant-current driving with current fluctuation less than 1mA Strict temperature control CE, FCC, ROHS certified IP67 Undertaking BS certification
Hinmin solar street lights have pleasing style, and the molding design of lampposts fully interrelates mechanics principle. greatly enhancing the wind resistance intensity of lamps and ornamental properties of lamps. Using super-efficient energy saving lamps or LDE lamps as lighting source, can not only meet the brightness requirements of the road lighting but also save a lot of energy.himin can also perform unique mixture design for some more cloudy areas. * High performance intelligent charging and discharging controller, uses advanced optical control and time control technology. * Lights can use low(high) voltage sodium lights, DC-energy saving lights etc. * The material of lamp body mainly use high-quality steel, and the surface use hot galvanized and plastic spraying treatment. * The height of the lights of lamp body is generally 6m-9m,and surface spaying color and electrical distribution can be designed according to customer requirements.
1. Saving energy evidently, totally averagely saving power more than 70%. 2. Environment friendly(without lead, mercury, and other highly toxic pollutants; without interference on the power grid, bad glare-free, non-life habitat light pollution) 3. Unique structure of the new design.(scientific rectangular design equipped with light distribution)。 4. Intelligent control systems, precise current. Four-side adjustment of lighting angles( the farthest distance between the poles horizontally up to +é-ª 25 m, one-way up to 16m). 5. Long life span. 6.80v-264v input voltage, applied worldwide and keeping the same lux.
LED Streetlight Specification and strengths for us: 1. Energy saving, LSZM-LED lamps use HB high-power semiconductor light source with high efficiency, saving power more than 70% than conventional high-pressure sodium lamp, metal halide; 2. Environment friendly, LSZM-LED lamps dont have lead, mercury, and other highly toxic pollutants, pollution-free environment; to use environmentally friendly power supply design, power factor 0.98, harmonic_ 0.1, without interference on the power grid; bad glare-free, non-life Habitat Light pollution; 3.Unique structure of the new design. The invention of modular light source; scientific rectangular design equipped with light distribution; the world's first street lights precincts optical system; patents and waterproof light lens design integration; cooling system and street lights shell design, cooling system, high-purity polymer materials, A small thermal resistance, and continued to light up the whole lamp temperature less than 56 degrees Celsius; 4, intelligent control systems. Current precision to ensure the efficiency of the LED light source an average of 90Lm / W; wide input voltage used all over the globe, 85 ~ 264V high and low intelligent switching, the same illumination; soft-start design, to avoid direct current to the LED chip impact on the effective protection of the LED, To extend its life span; 6 hours after the lights, automatic power by half, saving energy again;
LED Streetlight Specification and strengths for us: 1. Energy saving, LSZM-LED lamps use HB high-power semiconductor light source with high efficiency, saving power more than 70% than conventional high-pressure sodium lamp, metal halide; 2. Environment friendly, LSZM-LED lamps don't have lead, mercury, and other highly toxic pollutants, pollution-free environment; to use environmentally friendly power supply design, power factor 0.98, harmonic í_ 0.1, without interference on the power grid; bad glare-free, non-life Habitat Light pollution; 3.Unique structure of the new design. The invention of modular light source; scientific rectangular design equipped with light distribution; the world's first street lights precincts optical system; patents and waterproof light lens design integration; cooling system and street lights shell design, cooling system, high-purity polymer materials, A small thermal resistance, and continued to light up the whole lamp temperature less than 56 degrees Celsius; 4, intelligent control systems. Current precision to ensure the efficiency of the LED light source an average of 90Lm / W; wide input voltage used all over the globe, 85 ~ 264V high and low intelligent switching, the same illumination; soft-start design, to avoid direct current to the LED chip impact on the effective protection of the LED, To extend its life span; 6 hours after the lights, automatic power by half, saving energy again; 5. four-way adjustment of lighting angles. For different types of road, the poles of different pitch, LSZM-LED lamps use four-way adjustment of the technical point of view (the world's original), a one-way road width of up to 16 meters, the farthest distance between the poles of up to 25 m.
Flood light 400W
Solar battery components: 1.5wp Light source: multi-color and super-illuminated LED Battery: 1600mAh Ni-MH, maintenance-free battery Controller: special controller for solar lamps Lighting time: 8-10 hours each night, 3-5 days on-end in cloudy or rainy weather Dimension and material: 500-600mm in height, cast aluminum, spraying-plastic
Solar panel: 100wp,monocrystalline silicon component Battery: 12V/120Ah, fully sealed and maintenance-free lead-acid battery Controller: 15A,special controller for solar lamps, protection against overcharge and over discharge, light control and time control Light source: 30W super-illuminated LED Illumination: 1500Lm Lamps post: 7m,steel, over striking and thickening, hot galvanization spraying-plastic Lighting time: fully charged lamps may work 6-10 hours a day (adjustable) and last 3-5 days on-end in cloudy or rainy weather Applicable temperature:-40íµ-50íµ
Operating Voltage:110-130V/60HZ,220-240V/50HZ Max Watt:175W Lamp:HPS 250-400W/E40 Material:Plastic(housing) Toughed Glass(Diffuser) Finishes:any RAL-color upon request IP Rating:IP 65
1.9 Meter steel lighting pole 2.Round steel pole 3.Double Bracket 3.Steel pipe ª¦114.3 mm(4í¦) 4.2mm wall thickness 4.Steel pipe ª¦166.1 mm(6í¦) 4.2mm wall thickness 5.Door opening for electrical connection 6.Base plate 400X400X20mm thickness 7 Anchor bolt M24X700 mm long.
Structural Feature 1. Housing cast by 900T die-cast machine, featuring high strength, compact structure and smooth profile. 2. Reflector is made of high purity aluminum plate anodized, polished. 3. Highly-transparent toughened glass shade, 5mm thick, arc-shaped, heat resistant. 4. Spring cramp for operation. Integrated design enabling the installation of the electrical parts inside the lamp. 5. Rear pedestal designed for both horizontal and vertical installation to suit the need of various places. Technical Parameters 1. Protection rating: IP66 2. Housings anti-corrosion property: class II 3. Working environment: -35ípC~+45ípC 4. Lamp holder: E40 5. Electric shock-proof rating: class I 6. Power source: 220V - 240V/50HZ,60HZ 7. Lamp: 150W -400W high pressure sodium/metal halide bulb
Structural Feature 1. Housing cast by 1800T Buhler die-cast machine, featuring high strength, compact structure and smooth profile. 2. Reflector is made of high purity aluminum plate extension-formed. 3. Top-lift cover for easy repair and maintenance. 4. Internal bulb-replacement structure for excellent water-and dust-proof property. 5. Highly- transparent toughened glass shade. Technical Parameters 1. Protection rating: IP66 2. Housings anti-corrosion property: class II 3. Working environment: -35ípC~+45ípC 4. Lamp holder: E40 5. Electric shock-proof rating: class I 6. Power source: 220V - 240V/50HZ,60HZ 7. Lamp: 150W-400W high pressure sodium/metal halide bulb.
1.10 meter aluminum pole 2. Wall thickness: 5mm 3.Cast aluminum decorative base 4.Door opening for fuse box
Ac100-240v /32.5w /2700-8000k /80lm/w /ip65
A.Led nominal power¦60w B.Luminous flux¦>5100lm C.Central illumination¦>28lux¿6m D.Average illumination¦>20lux¿6m E.Pole height¦6-8m F.Pole to pole distance¦30m G.Rated power¦82w H.Protection grade¦ip65 I.Color temperature¦2500k-5500k J.Environment temperature¦-25--+45 K.Working voltage¦ac100v---240v, 50hz/60hz L.Led working current¦350ma M.Power factor¦²0.9 N.Lamp weight¦10.5kg¿net weight O.Lamp size¦540mm*280mm*94mm P.Packing: 1pc/carton Q.Packing size:580mm*325mm*185mm R.Gross weight(lamp+carton):12kg
