Product Description Blue Steel Faber HP Steel Tank Hot Dip Galvanized with Pro Valve Includes: Blue Steel PRO Valve, Tank, Current Hydro, VIP and Tank boot Faber Steel Cylinders Feature: 3442 psi (237 bar) working pressure Phosphatized-cleaned interior DOT SP13488 and TC SU7694-237 O2 cleaned for use with up to 40% pre-blended nitrox Includes rubber self-draining tank boot with round rim Inlet thread is standard �¾â??-14 NPSM Hot Dip Galvanized The most durable, corrosion-free exterior finish possible. The process involves submerging the cylinder into molten zinc. The zinc metallurgically bonds to the steel.
Dosing Tank Capacity: 100 LIT. MOC:LLDPE.
Jotun polishing machine/ China stainless steel tank/cylinder shell surface automatic polishing machine This is JT-1 tank shell surface polishing machine,which can polish tank shell inside and outside surface. Producting workpiece Material:Metal(stainless steel,carbon sheel,etc.) Min and max diameter:200-5000mm, Min and max thickness:>1mm Min and max length:300-6000mm. Weight:1/2/3/5/10Tons. Surface roughness:Ra 0.25m Shipment port:Shanghai port. Delivery time:30 working days Payment: T/T, L/C Warranty: 12months.
FRP tank product according customer's requirement
Pressure tanks are used in closed water circulation systems to balance water flow and pressure, avoiding frequent opening of safety valves and frequent replenishment of automatic water valves. The expansion tank not only serves to accommodate the expansion water, but also serves as a makeup water tank. The expansion tank is filled with air and can obtain a larger volume to accommodate the expansion water. High and low pressure expansion tanks can use their own pressure to supplement water to the pressure stabilization system in parallel. The control of each point of this device is interlocking reaction, automatic operation, small pressure fluctuation range, safe and reliable, energy-saving, and good economic effect.
Pressure Tank
Supply Ability & Additional Information Packaging: Wooden packaging or as requirementsTransportation: Ocean,Land,AirPlace of Origin: ChinaPayment Type: L/C,T/T,OthersIncoterm: FOB,CFR,CIF,EXW Packaging & Delivery Selling Units: Set/Sets Package Type: Wooden packaging or as requirements 50CBM 0.8Mpa low temperature LNG Storage Tankï¼? 1. Effective Volume: 50.0 m3 2. Working pressure: 0.8 MPa 3. Overall dimension: 3016*12120mm 4. Shell material: Outer jacket: Q245-R; Inner: S30408. 5. Insulation: Vacuum powder insulation 6. Tare weight: About 17680KG
ISO tanks T1, T4, T11, T14
ISO tanks T1, T4, T11, T14
What is a storage tank The design is based on the given working conditions and process size, considering the requirements of manufacturing and installation and maintenance, the correct selection of materials for each component load analysis, stress analysis. Material:carbon steel stainless steel 304, 316L,duplex stainless steel 2205,Titanium etc. Wall thickness: 3mm-20mm Pressure range:0.1-10MPa Layer: single layer,double layer (customizable) Volume:50L-30000L Installation :vertical /horizontal foods Application filed :Food, pharmaceutical industry, chemical industry, dairy products, fruit juice beverages and biological engineering etc. Advantages 1.Easy cleaning :Internal and external mirror polishing,fillet welding of tank no dead angle 2.Easy operation :Humanized structure design 3.Discharge outlet at bottom:It suits the purification area of pharmaceutical industry and the liquid compounding of food or fermentation and the treatment of water . 4.Flexible customization :The sampling place, inlet and outlet of liquid, hole for reservation and inlet and outlet of head/cold medium can all be customized to meet your unique processing and storage needs. � Shandong Qinglei Environmental Technology Co.,Ltd is an equipment manufacturer integrating design, production and assembly. Our products include heat exchangers, heat exchange units, pressure vessels, storage tanks, TCU temperature control systems, reactors, distillation towers, VOCS purification and recovery systems, vacuum� frying machine. If you need any of them,please donot hesitate to let me know,I will reply you ASAP.
Equipment Name: Conveying tank Manufacture Code: GB150Specification: ID1200Design pressure: 1.0 MPa Material: Q345R Volume: 1.5 m
Asme air storage tank with u stamp project name: petroequipment name: low pressure air storage tankmanufacture code: asmedesign pressure: 1.1 mpa, design temperature: 110 specification: id1000material: sa-516m gr.485volume: 2ma
Material: 6065A Volume: 40L Length: 720 mm Diameter: 280 mm Thickness: 3 mm Weight: 6 KG Max pressure: 5.5 MPA We can produce almost all the parts with aluminium alloy, because we are the second largest aluminium extrusion product developer and the largest in Asia. Just need a product profile drawings, after that I can calculate price for you.
The corrosive gas include the ethane, methane, butane, propane and natural gas. Cause the medium is the corrosive gas, we promise that the every tank must be X-ray detect before to the customer. We provide the gas storage tank with ASME code and Chinese GB to choice. As design we can provide areasonable price for the customer.
Application of the mirror surface aluminum fuel tank trailer The mirror surface aluminum fuel tank trailer is to transport the fuel from the fuel refinery factory to different fuel stations. The aluminum tank is made of aluminum alloy 5454 which has a better performance of heat resistance. This kind of aluminum tank trailer is especially suitable in heat and dusty area. Advantages of the mirror surface aluminum fuel tank trailer The advantages of aluminum fuel tank trailer are less weight, more load, lower operation cost, good appearance, etc. Except the good performance of heat resistance, mirror surface also appears good image which is also very attractive for transporters. The surface of aluminium fuel tank could keeps shinny and beautiful long time, no need painting and easy to wash. This also could improve the company image. Description of the mirror surface aluminum fuel tank trailer The 3 axle mirror surface aluminum fuel tank trailer is equipped with whole set of YORK axle and suspension, JOST landing gear and kingpin, Double coin super single tyre and aluminum wheel rim. The tank parts using OPW CIVOCAN parts. All these superior quality China parts and world famous parts support our good quality aluminum fuel trailer. What's more, this trailer is checked carefully both by inspector and machines to make sure this isn't any defective on welding and function. SpecificationDimensionOverall dimension11800x2500x2980mmTare weight7500kgsTankShapeRo und shapeTotal volume42000LTank body materialAluminum alloy 5454 5mm mirror surfaceTank end plateAluminum alloy 5454 7mm mirror surfaceCompartment2 independent compartmentsManhole coverAluminum manhole cover, OPW brandBottom valvePneumatic control bottom valve, OPW brandDischarge valve4 inches European type discharge valve, OPW brandVapor recovery systemWith vapor recovery system, OPW brandTrailer chassisMain beamHeavy duty special design I beam Made by aluminum alloy 6061AxleYORK axle, 13T capacityLanding gearJOST landing gearKingpinJOST kingpin 2 inchesSuspensionA whole set of YORK Air suspensionBraking systemWABCO RE 6 replay valve, T30/30 air chamberTireTubeless tyre 12R22.5Wheel rimAluminum wheel rim 9.0R22.5AccessoriesOne tool box, 2pcs extinguisher, foldable handrill
Quick DetailsPlace of Origin:Zhejiang,China (Mainland)Brand Name:OEMModel Number:PT-10HType:High Pressure GunApplication:Paint Spray GunCup Volume:10L/Qt, 2.65 Gal.Max working pressure:43.5 psi (3 bar)Air hose connection:1/4" NPTLiquid hose connection:3/8" NPTPaint tank/pot:10L/Qt manual/hand mixing air pressure quality paint/pot tank PT-10HPackaging & DeliveryPackaging Details:Sea worthy cartonDelivery Time: Shipped in 7 days after paymentProduct DescriptionProduct ApplicationBig capacity tank perfect for big area spraying such as wall, floor, assembly line, garages, body shop, ship yard etc.10L/Qt, 2.65 Gal. manual/hand stir HVLP air pressure quality paint pot PT-10HMax Operating Pressure43.5 psi (3 bar)Paint Capacity10 Liter/Qt,2.65 Gal.Air hose connection1/4"Liquid hose connection3/8"Stir typemanual/handInner tankS.S inner tankMain Features1)� Complete with paint tank(10 lier)/qt,2.65 Gal., manual stirring pole, paint exit tube, air pressure gauge, air regulator, safety valve, pressure release valve, fluid outlet valve(2pcs), air inelt&outlet, S.S inner tank air hose, paint hose(avaiable with longer ones) and 4 castors.2) Actuated by manual/hand3) One -piece format seamless steel body4) S.S inner is easy to replace the paint5) Large lid clasp&gasket makes good sealing and stability during operating6) Air safety valve and pressure regulator. for safety7) Mounted on castors for easy manoeuvrability8) Carry hook, paint strirrer and assembly spanner includedDetailed ImagesOur ServicePacking & Delivery
Feed water tanks
We are manufacturer for Liquid Nitrogen containers ranging from 0.5 Ltr till 35 Ltrs, even can make as per your requirements. We are supplying in India to various limited companies. We can also supply Epoxy Insulation Tubes. Kindly send me your detailed requirements so that we can quote you the best rates FOB / CIF.
Inflatables Products With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts. The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors. Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.
Inflatables Products With the experience of several years in rubber industry Zenith has now entered in inflatable products section and introduced range of products which include Air Cell, Gas Holder Balloon, Inflatable work boats and Life Rafts. The primary reason that Zenith holds for being great at making inflatable products is the state-of-the-art infrastructure for manufacturing inflatable products. The inflatable products undergo complete controlled manufacturing, from compounding to dispatch of finished products and extensive research & development gives Zenith a competitive edge over its competitors. Zeniths’ quality and manufacturing procedures are strictly in accordance with ISO 9001:2008, ISO 14001:2004 and ZENITH’s extensive R&D facilities are available to investigate new products and materials to meet the needs of our customers. Zenith certifications & awards assure highest quality products to its customers’ business requirements and needs.
