PFA sample dissolving tank is also called sample dissolving cup, digestion bottle, tubular bottle, etc; It is widely used for digestion of geological, geological and mineral experimental samples and dissolution of samples at medium and low pressures, supporting ICP-MS/ICP-OES analysis and other trace analysis experiments. According to the requirements of the experiment, there are U-bottom, flat bottom and V-bottom designs. It is used with the electric heating plate of our company, especially the perforated digestion instrument.
characteristic:
1. translucent appearance, smooth inner wall, no water hanging, easy to clean;
2. High and low temperature resistance: the operating temperature is - 200~+260 â?? (it is better not to exceed 150 â?? under closed conditions);
3. Threaded port, excellent sealing, no air leakage;
4. Insulation resistance: the dielectric property is independent of temperature and frequency;
5. Anti pollution: low blank value of metal elements;
6. Extremely low dissolution and precipitation, it is an excellent utensil for storing reference materials, highly corrosive, expensive and ultra pure reagents;
7. When falling from a height of 1.2m above the ground, the bottle body will not crack, the bottle cap will not fall off, and there will be no leakage. The open mouth can be autoclaved;
8. No toxicity: It is physiologically inert and can be implanted into the body;
9. The cover and body can be numbered without confusion;
10. The design of V-shaped bottom makes it more convenient to collect a small amount of samples; The U-shaped bottom design is suitable for the detection of geophysical and geochemical samples.
1.Good sealing.Will not leak
2.High compressive strength.reasonable product structure sress tested over 200 times for immutability
3.Small footprint
4.Easy to install Ready to use after installation
5.Long service life, can be used for 70 years
6.Low cost.The total cost is 65% of the concrete structure
7.Easy to use
The Allied Chemical and Equipment provides full customization on Storage Tank as per required specification and fulfilling needs of the customers.
These tanks are corrosion resistant and easily with stand various temperature, fluctuations, and deviations.
Product Specifications
Storage Capacity: 0.25KL to 30KL
Material Spec and Grade: SA 240 & SS 304/316/316L, IS 2062 & E250Br Gr.B and SA 516 Gr.70
Types: Horizontal, Vertical, Dished, Flat and Conical Storage Tanks
Technical Specification
MOC can be customized according to the end use with easy drain out provision
Monkey ladder and safety cage on the outer side of the tank and ladder inside for safe man movement will be provided, if required.
Cladding will be done either in stainless steel (welded or riveted) or riveted aluminium to withstand internal temperatures.
Quality Assurance
The Allied Chemical and Equipment fabricates complete GMP/Non GMP systems with detailed engineering layout.
All our new vessels are designed according to the stipulation of industry standards - ASME VIII, Div 1 and Good Engineering Practices
RUKN AL JOUF CO. is a national establishment having its office in Riyadh since 1998 exclusively specialized in the field of HVAC, GRP Tank & Plumbing Specialties all over the kingdom. Our services are viewed as a partnership with our clients, working hand in hand towards mutual success & optimal returns. A well-integrated comprehensive framework of professional services utilizing cutting edge computer system & engineering software; serve as the backbone of our vision.
RUKN AL JOUF CO. are in the GRP Tank business with Malaysian & Korean manufacturer, which is high demand nowadays in Saudi Arabia. We have a highly qualified team in the Marketing, Technical and as well in the Installation sectors.
FuelBuddy's smart fuel tanks are built to store volatile liquids and can be installed at your warehouse/parking yards. This Fuel storage tank comes in a multitude of sizes and adheres to the highest safety standards. The Smart tanks are above-ground tanks and are the easiest and most environmentally safe way to store flammable or combustible liquids (like Diesel). Tanks are available in sizes on 500 litres, 1000 litres and 2000 litres.
The Smart Features enable you to track fuel status and the usage details on App
- Petroleum bulk refuelling facilities and fleet operations- Standby generators- On-farm use for agricultural operations of all sizes- Industrial parks- Oil and gas, forestry and mining facilities, including temporary remote sites
Typical Applications -Construction:used for refuelling heavy equipment On Construction sites
Smart Features
Septic tank service
Garbage disposal installation
Outdoor plumbing system repair
Plumbing leak detection
Plumbing pipe repair
Septic system installation
Sewer repair
Toilet installation
BIO SEPTIC TANK
Septic tank service
Garbage disposal installation
Outdoor plumbing system repair
Plumbing leak detection
Plumbing pipe repair
Septic system installation
Sewer repair
Toilet installation
BIO SEPTIC TANK
Design Code: ASMEVIII-I
Design Pressure: Up to 35 Mpa
Material Code: From ASME & ASTM
Diameter Range: Up to 4 Meter
Length Range: Up to 50 Meter
Available Material:CS, SS, Alloy, High Alloy
Major Markets: Refinery, Petrochemical, Chemical, Offshore, Pharmaceutical, Marine industries
For most farmers, water and fertilizer storage tanks play an important role in farming. This precious resource is the lifeblood of everything from crops to cattle. Reliable and on-demand water supply is essential for operational survival. The economics and forecasting of agriculture-related industries are critical. As one of the world's leading tank suppliers, we are committed to providing farmers and ranchers with agricultural and irrigation tank solutions to store water, chemicals, feed, whether it be soybeans, turf or sunflowers.
Glass Fused to Steel agriculture water storage tanks are the leader of Water Storage Solutions, which is widely used as water and fertilizer storage tanks in Farm Plant. With the advantage of both GLASS and STEEL, Glass lined steel agriculture water storage tanks can resist corrosion of Waste Water of PH 1 - 14.
About Center Enamel Co., Ltd
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel provides industry glass coated steel water storage tanks with AWWA D103-09 standards. Our factory glass coated steel water tank is a unique tank finish. Two materials are fused together to achieve the best of both materials the strength and flexibility of steel combined with the corrosion resistance of glass. Applied to both interior and exterior surfaces, Glass-Fused-to-Steel is able to provide many years of trouble free service in harsh environments.
Center Enamel's GFS water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our water tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life.
Advantage of GFS water tanks
---- Short construction period,low project cost;
---- Superior corrosion resistance, service life is more than 30 years;
---- Convenient installation, easy construction, good quality;
---- Beautiful appearance, color can be customized;
---- Not subject to weather conditions;
---- No need big installation equipment;
---- Easily expand, dismantle, move.
About Us
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel Co., Ltd is the industry leader and has been designing and manufacturing and installing Stainless Steel Bolted frac sand storage tanks for more than 30 years. We provide high quality Stainless Steel Bolted frac sand storage tanks. The ability to place the bolted tanks in shipping containers allows us to service the entire world. With more than 10, 000 storage tanks successfully installed in 65 countries and thousands of applications, no other Asian company can match Center Enamelâ??s bulk tank experience in the design, manufacture and installation of bulk storage tanks .We are one of the few manufacturing companies that fabricates our own Stainless Steel Bolted frac sand storage tanks ensuring product quality.
The construction speed of the Stainless Steel Bolted storage tank can be increased by three times, saving the construction and life cycle cost for our customer. All tank panels are manufactured in the factory and shipped in full to the construction site in time. Experience, expertise and efficiency make Center Enamel the best choice for buying frac sand silos . Our frac sand storage tanks capacity ranges from 20m�³ to 20,000 m�³,
Our Stainless Steel Bolted storage tanks can withstand abrasive wear and have the longest service life of any tank. After decades of field testing and application, Center Enamel bolted steel frac sand storage tank is the best choice for all dry bulk storage tanks on the market.
Coating color dark blue, dark green, white, and customized
A standard steel plate size effective size 2400mm x 1200 m
Steel plates thickness 3mm - 12mm, depends on the diameter & height
Coating thickness 0.25mm - 0.4mm, two coatings internal and external
Acid and alkalinity proof standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14
Adhesion 3,450N/cm
Elastic same as steel sheet, around 500KN/mm
Hardness 6.0 Mohs
Service life >30 years
Spark test >1500 V
Permeability gas and liquid impermeable
Easy yo clean smooth, glossy, inert, anti-adhesion
Corrosion resistance excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil,
salt fox, organic and inorganic compounds
Center Enamel offers stainless steel storage tanks in a bolted tank design. Stainless steel bolted tank is assembled by stainless steel plates, bolts, special sealant, etc. It is an innovation in the installation of stainless steel welded tanks. The tank uses SUS304, SUS316L, and SUS444 stainless steel plates, which meet the national OCr18Ni19 sanitary inspection standards and have the characteristics of lightweight, low cost, environmental protection, and sanitation. Stainless steel bolted tank is one of the most widely used storage tank solutions and widely used in drinking water storage, food industry, agricultural irrigation, rainwater collection, firefighting water storage, industrial wastewater treatment, bio-energy, leachate storage treatment, municipal sludge storage, grain silos, etc.
Stainless Steel Bolted Tank Advantages:
Faster Installation: Compared with the stainless steel welded tanks, through the technical innovation of the installation, the stainless steel bolting tank installation is less affected by weather, and the installation cycle is easy to control, which greatly reduces the cost of construction.
High Quality: The stainless steel bolted tank is made of the physical and chemical stable SUS304, SUS316L, SUS444 stainless steel plate, which has superior corrosion resistance, good sealing performance and service life of up to 30 years.
Expansion Possibilities: Compared with stainless steel welded tank, stainless steel bolted tanks are easy to assemble, and can often be expanded to meet increased storage requirements.
Our bolted steel tanks are glass fused to steel tanks, which is mainly composed of steel sheet, special sealant, and the self-locking bolts. Glass-Fused-to-Steel technology is the premium coating technology in the storage tank market. The Glass-Fused-to-Steel technology adopts special steel for high strength enamel as the base material. By professional enameling technology, the high inert anticorrosive glaze layer is fused to the surface of the steel plate base material, and then the standardized enamel plate module is made. After the container is transported to the construction site, it is quickly installed with low consumption, and finally, the tank body is formed. Enamel assembly tank is an advanced tank production technology in the world, which has realized the breakthrough of materials, anti-corrosion technology, and installation mode compared with other materials (concrete tank and carbon steel welding tank).
The bolted steel tank is not complex in structure and easy to ship to the construction site. The prime components of the kit are the glass-fused-to-steel panels, ready for bolting together, and complete with any special cut-outs for nozzles and/or manways or other appurtenances as required. The panels overlap and are bolted together and sealed with a high performance seal Our Glass Fused to Steel proprietary bolts are finless and are safe to use with glass fused to steel bolted tanks. All the bolt heads are plastic-capped to provide corrosion protection in the process environment. Mastic squeezes out between the panels and the bolt head seals the shank and protects it from contact with process fluids.
Center Enamel is a well established, world-leading storage tanks manufacturer in China. Center Enamel provides the best storage tank solutions for storage tank projects for drinking water, Agricultural Water Tanks Dry Bulk Storage Tanks Potable Water Tanks Process Water Tanks wastewater, biogas storage, municipal sewage, firewater, grain storage, agricultural, oil, and other bulk liquids. Center Enamel has more than 30 years of industry experience and proud track record in the design and site erection of storage tanks and over the years has grown into a world-leading storage tanks manufacturer. Until 2018, Center Enamel storage tanks have been exported to more than 60 countries including the USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel bolted steel grain storage silos are made of glass fused to steel panels, special sealant, and self-lock bolts, as known as glass fused to steel tanks ( GFS tanks ). The bolted steel grain storage silos volume and capacities can be customized from 20m3 to 20000m3, to meet the different requests from different customers.
Combining the advantage of glass, Center Enamel bolted steel grain storage silos enjoy great anti-corrosion performance and more than 30 years of service life. Due to its unique benefits, bolted steel grain storage silos are the perfect grain storage solution for agriculture plants and popular in many countries.
Center Enamel Co., Ltd has been dedicated to the enamel industry for more than 30 years. As the most professional glass fused to steel bolted tanks manufacturer in Asia, Center Enamel has more than 200 patents of enamel frit formulas. The company owns a professional R&D Dep. with more than 60 people,set up a special laboratory, and possess independent enamel formula research ability.
The acid and alkali resistance bolted steel industrial water tanks also called glass fused to steel tanks, which combines the strength and flexibility of steel and the corrosion resistance of glass. Bolted steel industrial water tanks are assembled by Enamel sheet, Special sealant and Self-locking bolts. The enamel steel plate is coated with two layers of enamel on both sides and then burned with 900 high temperature, makes the enamel and steel plate bond together strongly. The strong bonding enamel coating not only can prevent the corrosion of industrial water tank, but also resistance to strong acid and strong alkali.
Center Enamel's industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011,and our industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone, etc., to make sure the tank structure's adequate security in long-term service life.
The glass-lined steel wastewater treatment tanks distinguish with its good performance good corrosion resistance, with the corrosion-resistant silica glass coating on the steel panels. This is the only wastewater treatment tank finish where two materials are fused together to achieve the best of both:� the strength and flexibility of the steel combined with the corrosion resistance of the glass. The high-temperature fusion of glass to steel fired at 850 degrees results in an inert, durable finish. Center Enamel's Glass-Fused-to-Steel wastewater treatment tank has been proved internationally with service life over 30 years.
Center Enamel Co., Ltd is not only the first� Glass-Fused-to-Steel Tanks� manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing, and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
The glass fused to steel wastewater treatment tanks distinguishes with its good performance â??good corrosion resistance, with the corrosion-resistant silica glass coating on the steel panels. This is the only wastewater treatment tank finish where two materials are fused together to achieve the best of both: the strength and flexibility of the steel combined with the corrosion resistance of the glass. The high-temperature fusion of glass to steel fired at 850-degree results in an inert, durable finish. Center Enamel's Glass-Fused-to-Steel wastewater treatment tank has been proved internationally with service life over 30 years.
Center Enamel Co., Ltd is not only the first� Glass-Fused-to-Steel Tanks� manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
1849 Storage Tanks Suppliers
Short on time? Let Storage Tanks sellers contact you.
