EZPAck proprietary 2-lyaers bladder. Available from 10-liter up to 20,000-liter
Basic knowledge about the external floating roof tank: The floating roof tank (FR tank) is broadly divided into external floating roof tank and internal floating roof tank (IFR tank). The floating roof tank (FR tank) does not have a fixed roof. It is open in the top and has a floating roof only. The external floating roof tank consists of an open-topped cylindrical steel shell equipped with a roof, which floats on the surface of the stored liquid. The roof rises and falls with the liquid level in the tank. As opposed to the fixed roof tank, there is no vapor space (ullage) in the floating roof tank, very low liquid level situations are not included. In principle, this eliminates tank breathing loss and greatly reduces the evaporative loss of the stored liquid. There is a rim seal system between the tank shell and roof to reduce rim evaporation. The floating roof has support legs hanging down into the liquid. At low liquid levels the roof eventually lands and a vapor space forms between the liquid surface and the roof, similar to the fixed roof tank. The support legs are usually retractable to increase the working volume of the external floating roof tank. What advantages does the external floating roof tank have? The external floating roof tank is usually installed for environmental or economical reasons to limit product loss and reduce the likelihood of emission of volatile organic compounds (VOCs) and other potential air pollutants. Normally, the roof of the external floating roof tank rests directly on the surface of the stored liquid, leaving little vapor space and consequently leading to a much lower risk of rim space fire. What products are suitable to store by the external floating roof tank? The external floating roof tank is storage tank that is commonly used to store large quantities of crude oil, condensate and so on petroleum products. Medium flash point liquids such as naphtha, kerosene, diesel, and crude oil are usually stored by the external floating roof tank. The fixed roof tank, internal floating roof tank and external floating roof tank are the main types of API Standard 650 storage tank we supply. http://api650steel.com/ Contact Ms. Olivia Henan BEBON Iron & Steel Co., Ltd Email: olivia.roy88@gmail.com Tel: 008637186151527
The name of the API620 design standard is "API620 Design and Construction of Large Low Pressure Storage Tanks", which is a specification for the design and construction of large welded steel and low pressure storage tanks formulated for design. API 620 storage tanks operate at 250F or less with operating pressures exceeding 2 lbs in and less than 15 lbs in . Steel storage tank construction method: Ordinary vertical storage tank construction basically adopts the guide chain inversion method: construction preparation material inspection blanking processing inspection tank bottom medium plate welding tank bottom arc edge plate center column and umbrella stand top ring group Welding Hemming Angle Steel Group Welding Temporary Dome Bracket Assembly Guide Chain Lifting Device Dome Group Welding Lower Ring Group Welding Lifting Top Ring Wall Panel Girth Welding Each Ring Girth Seam Group Welding Bottom Ring Corner seam welding of bottom plate edge plate of bottom plate inspection accessory installation vacuum test overall test settlement observation delivery. The company has long been engaged in the design, construction and on-site installation of foreign API620 storage tanks. It has ASME welding ability certification, API620 storage tanks, API650 storage tank design capabilities, pressure vessel design and manufacturing licenses, petrochemical equipment pipeline general contracting qualifications, and safety Production license, international trade import and export license.
Product Name: Pressure round tank manway with sight glass for sale Valve Body Material: 1.4404/1.4301, SS304/SS316L(Forged) Seal Material: EPDM (standard) conforms to FDA177.2600 Surface Finishing: RA 0.5 to 0.8 um Pressure: 5.0 Bar Max. Working Tem.: 120 degree C Availably Size: 200, 220, 300, 350, 400, 430, 450, 500, 600 Gasket: EPDM, silicone or Viton Height: 100,120,150 Certificate: PED 2014/68/EU, FDA.177.2600
Product Name: Pressure round tank manway with sight glass for sale Valve Body Material: 1.4404/1.4301, SS304/SS316L(Forged) Seal Material: EPDM (standard) conforms to FDA177.2600 Surface Finishing: RA 0.5 to 0.8 um Pressure: 5.0 Bar Max. Working Tem.: 120 degree C Availably Size: 200, 220, 300, 350, 400, 430, 450, 500, 600 Gasket: EPDM, silicone or Viton Height: 100,120,150 Certificate: PED 2014/68/EU, FDA.177.2600
Millionsun has a solar storage tank workshop to produce pressurized and unpressurized tank according to different demand. Corrosion and hard water is a challenge to tank, especially pressurized tank, we already have good solution. Stable product had exported to Europe and Africa. Besides good price performance ratio is also advantage for us.
Millionsun Solar water storage tank workshop to produce stainless steel tank and Vitreous Enamel tank, we make the solar storage tank according to Australia standard. The solar storage tank is well protected against corrosion and hard water. It combines easy assemble and an optimal price 1 performance. The hot water supply is provided in the hygienic continuous flow and the latest technology.
Millionsun has a solar storage tank workshop to produce pressurized and unpressurized tank according to different demand. Corrosion and hard water is a challenge to tank, especially pressurized tank, we already have good solution. Stable product had exported to Europe and Africa. Besides good price performance ratio is also advantage for us.
The heat pipe solar collector is one important part for the split pressurized solar system. This is consisted of great efficiency heat pipe and glass vacuum tube, with a great efficiency of heat collecting. This systems is mainly positioned on the roof or in the garden. And as this system is split with the water tank, so it's not heavy and looks very beautiful. This type system is now very popularly used in Europe, America and Australian countries. How it works The heat pipe solar collector absorbs solar heat mainly by the vacuum tube and the heat pipe. When the vacuum tube absorbs solar heat, it transfers the heat to the aluminum fin inside, and the aluminum fin is in good touch with the heat pipe, so it transfer the heat to the heat pipe. As soon as the heat pipe is heated, the liquid inside it will become steam and rise up to the condenser part, and release the heat to the water that goes through it, and then the steam will become liquid again and restart the circulation.
Millionsun has a solar storage tank workshop to produce pressurized and unpressurized tank according to different demand. Corrosion and hard water is a challenge to tank, especially pressurized tank, we already have good solution. Stable product had exported to Europe and Africa. Besides good price performance ratio is also advantage for us. Features: Attractive coating appearance Inner tank with stainless steel SUS316 or SUS304 Temperature and pressure relief valve Protect Electric booster inside as alternative heating element Easy matching to residential solar systems Automatic temperature control Directly foamed up polyurethane insulation to reserve heat
Millionsun Solar water storage tank workshop to produce stainless steel tank and Vitreous Enamel tank, we make the solar storage tank according to Australia standard. The solar storage tank is well protected against corrosion and hard water. It combines easy assemble and an optimal price 1 performance. The hot water supply is provided in the hygienic continuous flow and the latest technology. Features: Attractive coating appearance Temperature and pressure relief valve Protect Easy matching to residential solar systems Automatic temperature control. High quality and long life by optimal corrosion protection Have a long service life Easy installation
0.6MPA FRP TANKS (30 to 63 INCH) FOR INDUSTRIAL USE FRP Water Softening, Filter Tanks-Economy 100PSI-Rohone&Aowy Series FOR INDUSTRIAL: 30" to 63" FRP Water Softening, Filter Tanks-Economy 100PSI-Rohone&Aowy Series FOR INDUSTRIAL: 30" to 63" HEBEI CHENGDA HUAMO(HBCDHM in short) manufactures FRP tanks with design pressure 1.0Mpa(150Psi), 0.6Mpa(approx 100Psi) to meet various needs of the users. Structure and Materials of FRP Tanks Liner material: Rotation molding or Blowing One-piece seamless PE liner Outer Winding: High performance Epoxy resin + Fiberglass three-dimensional winding reinforcement. Opening: 2.5" and 4" reinforced plastic thread; 6" alloy flange. Base Materials: FRP or reinforced PP ASME Certification frp tanks Application Conditions Working Pressure: 150 psi(10.5 bar) for Winder series 0.6Mpa for Rohone and Aowy economy series. Working Temperature: 1 C - 49 C (34F - 120F) Max. Vacuum: 127mmHg Lowest Environment Temperature:-27 C (-17F) Strict Quality Control(Q/A) Fatigue test: 250, 000 times. (standard 100, 000 times) Burst test: 4 times of its design pressure. Certification: NSF & ACS, ASME Model: 0517-8079. Rohone and Aowy FRP tank also is Chengda brand: 100 Psi. (Chengda is the FRP RO membrane housing and FRP tanks production base for Frotec - the largest water treatment trading company in China. AOWY brand only for Frotec.) Specification of frp tanks No. Model Nominal dimension Opening Volume Base Dimension Top Bottom litre Gallon A (mm) B (mm) C (mm) D (mm) 1 06�?17 150*450 2.5"-8NPSM / 6.7 1.8 Standard 437 161 / 55 2 0635 150*890 2.5"-8NPSM / 15 4.0 Standard 896 61 / 155 3 0713 180*330 2.5"-8NPSM / 6.3 1.7 Standard 335 188 / 180 4 0717 180*432 2.5"-8NPSM / 8.6 2.3 Standard 437 188 / 180 8 0735 180*890 2.5"-8NPSM / 20.1 5.3 Standard 895 �¦188 / 180 9 07�?44 180*1110 2.5"-8NPSM / 24.5 6.5 Standard 1125 188 / 180 10 0813 200*330 2.5"-8NPSM / 8.5 2.2 Standard 335 216 / 207 FEATURE Chengda Winder, Rohone, and Aowy FRP softner tanks quality assurance: burst test with 4 times of its design pressure, and 250000 times cycle test. 1.HBCDHM FRP tanks (844-1665) use 600 TEX fiberglass, not 1200TEX fiberglass, with higher safety factor. 2.The base of HBCDHM FRP tank is made from pure raw material not recycled material, With better appearance, stronger toughness, and more environmentally friendly. 3.Key additives are imported from the US. APPLICATION HBCDHM FRP tanks are widely l used for water softening equipment in food processing plants, hospitals, laundries, manufacturing plants, office campuses and restaurants, condominiums, boiler feedwater, car washes, institutions, municipal, multimedia filters, carbon filters, iron filters, calcite filters and specialty media filters
Our Firm is Ranked among the reputed names in the market for Offering an Extensive range of PIN MILL SS WEAR PLATE Besides, We Present this Series to Our Clients at Nominal Prices. Riding on unfathomable Volumes of Industrial Expertise, we are actively committed to Providing world-class Pin Mill SS 304 Wear Plate. Features: . High Strength . Sturdy Design . Easy to Install
Our Firm is Ranked among st the reputed names in the market for Offering an Extensive range of PIN MILL SS SCREW.Besides, We Present this Series to Our Clients at Nominal Prices. Riding on unfathomable Volumes of Industrial Expertise, we are actively committed to Providing world-class PIN MILL SS SCREW. Features: . High Strength . Sturdy Design . Easy to Install
Steel Water Tank hot dip galvanized water tank steel tower custom Tower Tank company Overhead Tower Tank Specification H section steel column, beam, and angle steel support Access ladder with safety cage Option of having a walkway around the tank Design certificate from registered professional engineer Surface finish: galvanized or painted The tower height can be 3m, 6m, 10m, 12m, 15m etc. At present, we have made the highest tower 28m. All the steel parts are prefabricated in factory, just assemble together with bolts&nuts. Installation service are available. Steel Water Tank Specification Water tank material Hot dip galvanized steel Water tank capacity 1m³~5000 m³ Water tank size According to the water volume or customer's request Using life â?¥20 years Galvanized panel Panel material mild carbon steel Q235 A Panel size 1220mm*1220mm,1000mm*1000mm Panel thickness 5mm, 4.5mm, 3mm, 2.5mm, 2mm, 1.5mm (It is different according to the tank dimension) Acceessories Bolt. nut & washers hot-dipped galvanized material Sealing material Non-toxic P.V.C foam tape shall be used in between the joints Covers from 1.4mm to 3.0mm of thickness hot-dipped galvanized material Ladders and Level Indicator hot-dipped galvanized material As a professional container house and steel structure chicken house manufacturer in China, our company and products are well received and got high reputation at home and abroad. For more product information, please click here. https://www.steelbuildingtech.com/
35l YDS-35 cryogenic ln2 tank We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc. Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability. Liquid capacities range from 2 liters to 100 liters.
50l storage / transport semen embryo ln2 tank We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc. Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability. Liquid capacities range from 2 liters to 100 liters. Phone / WhatsApp: +86 15537364271 Email: thompson@pchaoinstrument.com Website:www.n2tank.com
We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc. Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability. Liquid capacities range from 2 liters to 100 liters.
We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc. Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability. Liquid capacities range from 2 liters to 100 liters.
30L liquid nitrogen storage tank We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc. Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability. Liquid capacities range from 2 liters to 100 liters.
