We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc.
Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability.
Liquid capacities range from 2 liters to 100 liters.
30L liquid nitrogen storage tank
We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc.
Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability.
Liquid capacities range from 2 liters to 100 liters.
We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc.
Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability.
Liquid capacities range from 2 liters to 100 liters.
Description:
mud tank/water tank, oil sludge tanks, Oilfield three runner design Skid mounted tank, with galvanized grating, safe handrail, coated with Marine corrosion-resistant zinc rich epoxy coating and paining, two layers for inside tank, three layers for outside tank.
Liuda Li
We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc.
Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability.
Liquid capacities range from 2 liters to 100 liters.
1849 Storage Tanks Suppliers
Short on time? Let Storage Tanks sellers contact you.
We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc.
Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability.
Liquid capacities range from 2 liters to 100 liters.
We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc.
Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability.
Liquid capacities range from 2 liters to 100 liters.
We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc.
Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability.
Liquid capacities range from 2 liters to 100 liters.
We offer a wide range of Aluminum Alloy Liquid Nitrogen Containers that are widely used for medical and scientific purposes. Such as: for the conservation of semen, embryos, spawn, vaccines, skin, organ and other biological material, cold assembly, instruments and components of cooling, cold therapy etc.
Available in various shapes, sizes and capacities, these Nitrogen Containers are insulated and vacuum jacketed. The light weight aluminum construction ensures easy portability and the polyurethane paint ensures long durability.
Liquid capacities range from 2 liters to 100 liters.
Nanjing Xiante Storage System
This is a typical energy storage independent capacity expansion project.Due to owner's business expansion, the original transformer is overload for long time.In order to avoid the risk of electricity consumption, an energy storage system is installed. This system will dynamically adjust the discharge power according to the load situation during daytime, so as to ensure transformer is in a safe operating range at any time.
This system could reduce capacity charge by provide a large amount of power to the load in a short period of time after slowly charging.
Pilot Scale Fermenter Bioreactor
(Automatic Steam Sterilization )
(Automatic Temperature Control)
Total Volune:1000 Litter
Working Volume:70% Of Total Volume
Contact Part: SS 316L
Non Contact Parts: SS 304
Sheet thickness: 4 mm
Contact Part: SS 316L
Outer Finish : Matt Finished
Inner Finish : 220 Grit Finish
Motor : 3 HP
Gearbox Ratio :1:10
Output RPM Speed : 144
Speed Controlling: Using VFD
SIP System : Yes( Inbuilt)
CIP System : Yes( Inbuilt)
Temperature Sensor : PT-100 Type(Sterilizable)
Temperature Controlling System : PID Control Digital Display
Design Temperature: 125ºC
Maximum Operating Temperature: 121ºC
Design Pressure: 4 KG/CM2
Maximum Operating Pressure: 2.5 KG/CM2
Safety Valve : SS Adjustable Pressure Safety Valve
Pressure Indicator : SS Dial Type Filled With JEL
Air Inlet Filter : 0.2 Micron PP Filter With 5 SS 316L Filter Housing
Air Outlet Filter : 0.2 Micron PP Filter With 5 SS 316L Filter Housing
Air Outlet : Through Shell Tube Type Condenser ( Heat Exchanger)
Spurger System : Ring Type Air Spurger System At Bottom
Stuffing Box Sealing: For Zero Contamination and Reduce Air Leakage
Baffele : 4 Nos( Size Vessel Dia/10)
Impeller : 3 Nos Of Adjustable Ruston Turbine( Six Blede)
Bottom End : Dish End With 50 Tc Drain Valve For Material Outlet
Top End : Flat
Sight Glass : For View Process and Level Of Liquid
Vessel Top Ports Detail
Pressure Gauge Port: 35mm Tc Connection
Safety Valve Port: 35mm Tc Connection
Air Outlet Port: 35mm Tc Connection
Light Glass Port: 92mm Tc Connection
Top Viewing Glass Port: 92mm Tc Connection
Material Inlet Port : 50mm Tc Connection
Inoculation Port : 50 mm Tc Connection
Water Inlet Port : 50 mm TC Connection
Extra Port : 50 mm Tc Connection
Vessel Side Ports Detail
Temperature Sensor Port : 50 mm Tc Connection
Ph Sensor Port : 50 mm Tc Connection
Do ( Dissolve Oxygen) Sensor Port : 50 mm Tc Connection
Sampling Port : 50 Tc mm Connection
Jacket Side Ports Detail
Pressure Gauge and Safety Valve : 35mm Tc cross Connection
Jacket Water/steam Inlet : 35mm Tc T Connection
Jacket Water/steam Outet : 35mm Tc T Connection
DESCRIPTION
Application of Marine Pressure Water Tank:
The pressure water tank can be used to provide fresh water for living and cleaning of ship and drilling platforms.
Principle description:
The device uses the pressure water pumped by water pump in tank to compress air so as to keep the water in tank under a proper pressure for the use on board.
Main Technical Parameters of Marine Pressure Water Tank:
Capacity: A(0.12m3, 0.2 m3,0.3 m3)
B(0.5 m3,1.0 m3)
C(0.5 m3,1.0 m3,1.5 m3,2.0 m3,3.0 m3)
Working Pressure: 0.6MPa
Design Pressure: 0.7MPa
Strength Test Pressure: 1.05MPa
Tightness test pressure: 0.875MPa
Safety valve open pressure: 0.63MPa
Pillow Plate is a highly versatile panel-type heat exchanger that can be welded, formed, or fitted to meet your exact needs. It can be applied in irregular shapes, at high pressures, high temperatures, or in corrosive environments.
Thermally efficient types of Pillow Plate
1. Immersion heating and cooling
2. Can heating,cooling, or heat preservation outside the container
3. Built-in for heating or cooling, such as internal heated fluidized bed
4. Special heat exchanger
5. Evaporator, Condenser
6. Clamp-on heating, cooling, and temperature maintenance
7. Polymerizer cooling, heating baffles
8. Ice storage
9. Plate heat recovery group
10. Drum Insulation
11. Equipment trough jacket
12. Conical head jacket
13. Dyeing heater
14. Flue gas heat recovery plate group
15. Falling film cold water ( brine ) Unit
16. Built concentrator or reboiler
17. Large built-in bezel set for cooling vegetable oil
Popular Laser Welding High Efficiency Pillow Plate
Features
1. Available in most materials, like stainless steel 304, 316L, 2205 and titanium
2. High operating pressures
3. High operating temperatures
4. No gaskets required
5. Corrosion resistant
6. Easily formed to fit the shape you need
7. Cutouts are easily provided
8. Thermally efficient types of heat transfer
9. Immersion heating and cooling.
10. Clamp-on heating, cooling, and temperature maintenance
11. Integral jacketing for heating and cooling
12. Custom heat exchanger design
13. Evaporators
14. Condensers
15. Easily cleanable, attractive finishes available
16. Low pressure drop design
17. Pharmaceutical and food-grade designs available
18. More active heat transfer surface available
The type of Pillow Plate
Double Embossed
Double-sided pressure molding, usually used for most applications
Suitable for heating and cooling process, generally, the thickness on both sides plate are the same.
The materials can be stainless steel , hastelloy and carbon steel and so on . The different material and thickness can meet different working pressure.
Popular Laser Welding High Efficiency Pillow Plate
Double Embossed Pillow Double embossed pillow is ideally suited as a heat exchanger for liquids or powders and granules. Due to the laser welding technique, a pillow plate having a relatively low wall thickness can withstand (very high) high working pressures. The high degree of design flexibility also offers many opportunities to achieve the best possible product with the best possible heat transfer. Extremely versatile applications Double embossed pillow plates are used, for example, as cooling technology and as heat exchangers in the food industry. Double embossed pillow blocks are deployed for complete installation, such as drop film water coolers, immersion coolers or ice banks. Double embossed foam board for heating and cooling, the use of a wide range of coolants and heating agents, such as water, steam, ethylene glycol, freon, NH3, CO2 and so on.
The technology of storing coal in silos has been used in some power plants and coal mines. Coal storage silo usually use cement silo or steel silo, at present, there are more application of cement silo. However, cement silo take a long construction period and high investment. Lipp steel silo as the leader of steel silo, has been gradually used in grain and oil, brewing, building materials, environmental protection, chemical industry, energy and other industries, such as yidong group, ningbo kangli glass co., ltd, etc.
Lipp silo is well-known by the technology invented by germans named mr.Xaver.Lipp. In 1960s and 1970s introduced to china. In 1980s start application in the field of cement building materials, now widely used in cement plant, grinding station, hydropower station, thermal power station, cement transfer depot, etc.
With good integral property and long service life, flyer steel silo is used for storage of slag, mineral powder, fine powder and fly ash.
The steel silo is constructed with special equipment when it was built. In the process of rolling, the ektexine of the silo was made to a spiral convex band with thickness five times more than the material, and width of 30 to 40 mm, which highly strengthened the carrying capacity of the silo, and make the overall intensity, stability as well as shock resistance preceding over other silos.
Galvanized steel coil with strong anti-corrosion property is used to make the service life of flyer steel silo longer than the other products.
The diameter of the silo is 3-28 m. The theoretical height can reach 30 meters.
Our company mainly design, manufacture all kinds of storage tank, gas, reaction kettle, heat exchanger, stirred tank and other pressure vessels.Design and manufacture according to GB testing standards, ASME and PED.Non-standard equipment
Ordering instruction :
1. Processing with supplied drawings and samples by customers
2. Independent design to confirm
You need to provide parameters are as follows:
device traffic, filtering medium,fluid operating pressure, filter precision, operating temperature,the interface size, the interface position and size.
3. Can provide a standard form of filters for customers to choose.
It is working capacity 1000Liter Steam heated emulsifying Tank,Material,All made of SUS316L,others SUS304,Semi-open cover,3-walls with full jacket for heating or cooling and polyurethane insulation,Equipped with ONE complete set of Paddle agitator,motor 1.5kw,speed 60rpm,the other one with a Homogenizer on the bottom,motor 3kw,speed 2800rpm.The others accessories as a CIP automatic-rotating cleaning ball inside,one material Inlet,spare holes,one manhole,one ordinary thermometer(0-150C),one ordinary pressure gauge,two medium inlets,one medium outlet,one control box(Power on/off,Stirring on/off,temperature display etc)one bottom material outlet discharge etc,the tank with Platform & staircase. as per the final production drawing.nner 3mm,inner normal pressure,Jacket 3mm,working pressure 0.2mpa,design 0.25mpa,Insulation layer 50mm,outer 2mm.Inner&outer mirror polish.Power Supply:380V/50HZ/1-phase.
1849 Storage Tanks Suppliers
Short on time? Let Storage Tanks sellers contact you.
