Item Specification Materials: Cold rolled steel strips slit edge, non-skinpassed Size: 0.6-1.5 mmf-323 mm max Grade: Q195 black surface finish or bright surface finish Coil weight: 400kgs min each coil. 2 - 4mt per pallet Coil id: 500-580 mm Thickness tolerance: +/-0.02 mm Mill's standard export packing by pallets
Hardened & tempered strip steel Dimension (mm) Thickness 0.3mm to 2.5mm Width : 2.8mm to 260mm The strips are careful packed on skids in corrugated board boxes or wooden boxes and strapped with steel band.
Plastic clad steel strip
Spring steel strips We make this strips in c55, c65, c75, c80 grades Surface finish we can offer is grey, bright, blue, golden Edges we can offer is slitted , deburred, rounded Depends on size
Steel strap in seawoorthy packing
With enriched industrial experience and knowledge, we are providing an excellent range of Mild Steel Strip.
1. PRODUCT OVERVIEW VHR steel strip-seal joint made by Vinh Hung Investment and Production Co., Ltd (Vinh Hung IP) comprises of two steel rails with anchor bars connected to embedded bars in the pier cap of headwall of abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrink mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joint identified by the cross section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2. PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movements if any. Simple in design and installation, high load capacity and durability. Designed suitably for flush curb and central reverse. Totally water-tight. To ensure the long-lasting durability, VHR steel strip expansion joints are protected from corrosion with methods such as: 2-component epoxy coating, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al â?? Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards. MATERIAL PARAMETERS 1. PROPERTIES OF METAL ELEMENTS ITEMS Tensile strength, min Yield strength, min Elongation, min NO. 1 2 3 REQUIREMENTS 450 345 23 UNIT MPa MPa % STANDARD ASTM A709M PROPERTIES OF RUBBER SEAL UNIT REQUIREMENTS Point Mpa 1 2 3 4 5 Hardness Tensile strength, min Ozone resistance, content of ozone in the air 100pphm, 20% deformed at 40o C x 70h Elongation at break, min Hot air aging test in 70 hours at 100o C Tensile strength change, max Elongation change, max Hardness change 65 ± 5 7 No crack 250 - 20 - 40 0 - 15 STANDARD ASTM D2240 ASTM D412 ASTM D1149 ASTM D412 ASTM D573 ASTM D573 ASTM D573 ASTM D573 Installation of joints is critical to ensure the lifespan of the expansion joint and smooth traffic. Careful preparation of machinery, equipment, and highly specialized human resources is required for the installation of high quality expansion joints. The installation method shall be strictly followed to guarantee the actual performance of the product in service. 1. After finishing pavement, cut and clean he trend, adjust embedded bars, laym reinforcement bars on site 2 . Fix the deformed bars, install the fabricated joints, add distribution bars, anchoring bars to embedded bars. 3. Cure concrete, install rubber seal, allow traffic when concrete 4. Install formworks and pour non-shrink mortar or high-strength concrete to transition section, check the leveling of surface.
We offer cold rolled hardened and tempered steel strips in various grade and specifications. do let us know your requirement.
1.Galvanized/galvalume steel coil 2.Thickness: 0.12-2.0mm 3.Width: 600-1250mm, or as customer request 4.Quality: sgcc, dx51d 5.Width:600-1250mm(according to your need) 6.Technique:cold rolled/hot dipped galvanized/color coated 7.Z-coating:40g/m² , 180g/m² 8.Tolerance:thickness: ±0.02mm width: ±2mm 9.Packing:standard export packing 10.Moq:25metric tons 11.Payment:t/t, 30% in advance and the rest before loading. 12.Delivery time:7-20days after payment. Galvanized steel strip is also called hot-dip zinc or hot-dipped galvanizing. It is an effective way of metal anti-corrosion, mainly used in the industries of metal structure facilities. De-rusted steel is dipped in to 500 °c zinc liquid and coated with zinc which provides corrosion protection. Galvanized steel based on cold rolled steel strip has excellent machining performance and high stamping. It is beautiful with smooth surface, accurate size, flat panel and well-distributed spangle and stored for a long time after passivation and oiling. It is the good base metal for ppgi after surface treatment. Cheap price thin thickness cold rolled galvanize steel strip
Product Description Product Name Solar Photovoltaic Stent Species Photovoltaic solar stent Thickness 0.5 mm-15mm Material Carbon steel: Q235,Q195,Q345 etc Surface Treatment hot dipped galvanized/electrogalvanizing/spray paint,etc Standard AISI/ASTM/BS/GB/DIN/JIS/etc Certification ISO9001:2008 Packaging PVC is free,we also can pack as you request Delivery time 15-30 days after receive L/C or deposit by T/T Payment terms L/C or T/T Note We can produce other standard as the customers' requirement Quality Assurance Solar stent don't be corrosion in 10 years, don't reduce the rigidity in 20 years, has certain structure stability in 25 years
Steel strip The material : Q195,Q235, DX51D,SGCC, SGCH (full hard), SGLCH, CGCC, CGCH The size : 0.1-3.0*20-1500mm
Sell z profile steel, z purlin, z channel, z beam, z shaped steel
Hot rolled steel strip 1.Specification Commodity Steel strip StandardAISI, ASTM, BS, DIN, GB, JIS width 30-700mm Thickness 0.15-4mm Technique Hot and Cold Rolled Price Terms FOB,CFR,CIF Payment terms 30%TT in advance+70% TT or irrevocable 70%L/C at sight delivery time within 15days delivery place Tianjin xingang port Surface treatment chromed / skinpass/ oiled/slightly oiled/ dry/ anti-fingerprin
1.Specification Commodity steel strip Standardaisi, astm, bs, din, gb, jis width 30-700mm thickness 0.15-4mm technique hot and cold rolled price terms fob, cfr, cif payment terms 30%tt in advance+70% tt or irrevocable 70%l/c at sight delivery time within 15days delivery place tianjin xingang port surface treatment chromed / skinpass/ oiled/slightly oiled/ dry/ anti-fingerprin
Sell Cold Rolled Steel Strip Specification Commodity Steel strip StandardAISI, ASTM, BS, DIN, GB, JIS width 30-700mm Thickness 0.15-4mm Technique Hot and Cold Rolled Price Terms FOB,CFR,CIF Payment terms 30%TT in advance+70% TT or irrevocable 70%L/C at sight delivery time within 15days delivery place Tianjin xingang port Surface treatment chromed / skinpass/ oiled/slightly oiled/ dry/ anti-fingerprin
Sell Galvanized Steel Strip Product Application 1) Buildings and constructions: roofing, ceilings, gutters, venting lines, indoor decorations, window frames, etc. 2) Electrical appliances: computer shells, washing machines, refrigerators, dehumidifiers, video recorders, water heaters, etc. 3) Agricultural equipments: troughs, feeding tools, agricultural driers, irrigation channels, etc 4) Vehicle parts: back-seat plates of buses and trucks, conveying systems, oil tanks, etc. Name Color coated steel coil/ Prime prepainted galvanized steel coil/ PPGI coil z275 Description Prepainted Galvanized Steel Coil Model Number TongYing Steel Type Cold rolled steel sheet, hot dipped zinc coated steel sheet, hot dipped A-Z coated steel sheet Paint Color Based on RAL No. or customers' color sample Paint Polyester , and your special requirement to be discussed Paint Thickness 1 Top side: 25+/-5 micron 2 Back side: 5-7micron Or based on customers' requirement Steel Grade Base material SGCC or your requirement Thickness Range 0.16mm-1.2mm Width 1000mm,1200mm,1250mm,1500mm Zinc Coating Z40-Z275 Coil ID 508mm or 610mm Coil Weight 3-5MT, or as per customers' requests Technique Cold Rolled Surface Protection PE,PVDF,SMP,HDP,etc Surface Treatment Galvanized,Chromated,Unoiled/Oiled,Bright Finished,Spangle,Fingerprint Resistance.
Sell Colour Steel Plate,Prepainted Steel Strip Product Application 1) Buildings and constructions: roofing, ceilings, gutters, venting lines, indoor decorations, window frames, etc. 2) Electrical appliances: computer shells, washing machines, refrigerators, dehumidifiers, video recorders, water heaters, etc. 3) Agricultural equipments: troughs, feeding tools, agricultural driers, irrigation channels, etc. 4) Vehicle parts: back-seat plates of buses and trucks, conveying systems, oil tanks, etc. Name Color coated steel coil/ Prime prepainted galvanized steel coil/ PPGI coil z275 Description Prepainted Galvanized Steel Coil Model Number TongYing Steel Type Cold rolled steel sheet, hot dipped zinc coated steel sheet, hot dipped A-Z coated steel sheet Paint Color Based on RAL No. or customers' color sample Paint Polyester , and your special requirement to be discussed Paint Thickness 1 Top side: 25+/-5 micron 2 Back side: 5-7micron Or based on customers' requirement Steel Grade Base material SGCC or your requirement Thickness Range 0.16mm-1.2mm Width 1000mm,1200mm,1250mm,1500mm Zinc Coating Z40-Z275 Coil ID 508mm or 610mm Coil Weight 3-5MT, or as per customers' requests Technique Cold Rolled Surface Protection PE,PVDF,SMP,HDP,etc Surface Treatment Galvanized,Chromated,Unoiled/Oiled,Bright Finished,Spangle,Fingerprint Resistance.
Sell H Profile Steel, H Purlin, H Channel, H Beam Product Description Product Name Solar Photovoltaic Stent Species Photovoltaic solar stent Size length/width/thickness/height can manufacture as you request Thickness 0.5 mm-15mm Material Carbon steel: Q235,Q195,Q345 etc Surface Treatment hot dipped galvanized/electrogalvanizing/spray paint,etc Standard AISI/ASTM/BS/GB/DIN/JIS/etc Certification ISO9001:2008 Packaging PVC is free,we also can pack as you request Delivery time 15-30 days after receive L/C or deposit by T/T Payment terms L/C or T/T Note We can produce other standard as the customers' requirement Quality Assurance Solar stent don't be corrosion in 10 years, don't reduce the rigidity in 20 years, has certain structure stability in 25 years
High Speed Steels are high performance special steels offering high hardness at temperatures up to 500 and high wear resistance, SMC high-speed steel is all produced with electro-slag refining (ESR), its grade and variety have been forming a complete range after consistently improved and its quality has reached an international advanced level. SMC Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might otherwise be caused during storage or transportation. In general we provide the packing list to our honored clients for the product packing detail, and labeled with SMC shipping mark on the surface of each package. If you have special requirement for the packing, please feel free to contact us.
1) Grade: Ordinary carbon steel: Q195, Q235 SPCC, SPCD, SPCE, DC01-06, St12, etc. Improved carbon structural steel: 2) Thickness: 0.10mm - 3.0mm 3) Width: 10mm and above 4) Coil ID: 250mm/400mm/508mm or per customer's request Strapped with min three strapping strips, covered by anti-water paper and plastic film, fixed on the iron or wooden pallets by strapping strips and covered by plastic bag to prevent damage from transportation.
