1. Thickness:3-130mm 2. Width:1250-4020mm 3. Length:3000-27000mm 4. Grade:400/450/500 5. The thickness from 3mm, hardness is uniform, with no soft point. 6. Flatness could be controlled within 4mm. 7. All the plates are quenching and tempering to get the best hardness and toughness. 8. The makings from Chinese best steel mill, Baoshan Iron and Steel Mill 9. Perfect cold properties, with no crack; perfect welding properties. 10. Cooperate with CATERPILLAR in China and CNHT China National Heavy Duty Truck Group Corp., Ltd All the plates are Peen-forming spray paint.
Expanded metal: Raised Mesh SWD: Plus 1/4" minus 0" per foot of width LWD: Plus 3/4 minus 0" Flattened Mesh SWD: Plus 1/4" minus 0" per foot of width LWD: Plus 3/4" minus 0" Grating SWD: Plus 1/4" minus 0" per foot of width Camber Measured by placing a straight edge along the concave side of the sheet parallel to the LWD, touching both ends. The maximum distance from the edge expanded metal to the straight edge is the camber Raised Mesh 1/16" per foot of length Flattened Mesh 3/32" per foot of length Out of Square Expanded metal sheets are not perfectly square as manufactured. Stock size sheets and machine run non standard size sheets will be produced to the following tolerances SWD: 1/16" per foot of Width LWD: 1/16" per foot of Length Sheets that have to be perfectly square must go through a secondary process of shearing. Flattening Flattened sheet thickness shall be plus or minus 10% of published thickness or strand thickness Non standard sheets Machine run
Steel plates Thickness: 1.5 to 300mm Width: 1, 000 to 3, 000mm Length: 6, 000 to 12, 000mm Steel grades : St37-2, st52-3, c45e, ss400, s45c, sm490, s235jr, s355(jr, j0, j2, j2g3, j2g4, k, k2g3, k2g4), astm a36, astm a572 gr50 and 1045.
Steel Plate For boiler and other pressure vessel Thickness: 6 to 200mm Width: 1, 500 to 4, 000mm Length: 6, 000 to 20, 000mm. Steel grades: ASTM A515: 65 and 70 ASTM A516: 55, 60, 65 and 70 ASTM A537: 1, 2 and 3 ASTM A662: A, B and C ASTM A387: GR 11-1, 2 GR22-1, 2 GR21 SPV235, SPV315, SPV355, SPV410, SPV450, SPV490, SGV410, SGV450, SGV480 SA299M, SA515M(Gr.60, 65, 70), SA204M(Gr.A, B, C) , SA387M(Gr.11, 12, 22) SA537M(GL.1, CL.2), SA662M(Gr.A, B, C), SA302M(Gr.A, B, C, D), SA737M(Gr.B, C) SA738M(Gr.A, B, C) , P235GH, P265GH, P295GH, P355GH, 16Mo3, 13CrMo4-5 .
Alloy Steel Plate or High Stength Low Alloy Steel Plate Thickness: 8-300mm Width: 1500-4000mm Length: 4000-20000mm Steel Grade: Q345(A/B/C/D), ASTM A572 GR50, St52-3, S355(JR/J0/J2G3/J2G4/K2G3/K2G4) Q295(A, B), Q345(A, B, C, D, E) , Q390(A, B, C, D, E), Q420(A, B, C, D, E), Q460(C, D, E), Q500(D, E), Q550(D, E), Q620(D, E), Q690(D, E), SM490(A, B, C), St44-3, St52-3, StE315, StE355, StE380, StE420, StE460, StE500, A572M(Gr42, 50, 60, 65), A633M(A, B, C, D, E), S275(JR, JO, J2G3, J2G4), S355(JR, JO, J2G3, J2G4, K2G3, K2G4), E395, E335, E360, S275N, S275NL, S355N, S355NL, S420N, S420NL, S460N, S460NL, Fe430(A, B, C, D) 15CrMo, 20CrMo, 30CrMo, 35CrMo, 20Cr, 40Cr, 20Mn2, 40Mn2, 20CrMnMo, 12Cr1MoV, 30CrMnSiA, 25CrMo4, 34CrMo4, 42CrMo4.
SS400, A36 30x1500x6000 mm Minimum order : 500 mts. 30x1500x6000 mm.
Ordinary steel plate: material: q235a/b/c/d, sphc 2. Alight gauge plate: material: q235a/b, four side-mill edge, 16mn 3. Asteel plate from coil: material: q235a, q235b, q345, ss400, sphc 4. Amedium-plate: material: q235a/b, q345a/b, 45#, 15crmor, 12crmov, x42-x100, 16mnr, 20g, x70, q460, hq550db, hq785db, 80ai 5. Asteel sheet in coil: material: q235a/b, ccsa/b, 20g, x60, q215-235bf 6. Ahot rolled plate: material: q235a/b, q345, 20#, 45#, ss400, stht3, 08al 7. Hot rolled steel strip: material: q345b, q195, 45#, q235, q215, q195ld 8. Ahot rolled manganese plate(coil): material: q345a, q345b 9. Ahot rolled sheet: material: q195-q235, sphc, sphd, ss400 10. Ahot rolled steel plate form coil: material: ss400 11. Ahot rolled steel sheet in coil: material: ss400, q235a, q235b 12. Acold rolled steel sheet in coil: material: dc01, dc03, dc04, dc06, st12, st13, st14, st15, 10#, 20#, 45#, 08ai, ss400, spcc, sphd, q195, 50crv4, spc-sd, csb, ayhs, 170pi, spcc-sd, spcen-sd 13. Acold rolled box sheet: material: dc01, spcc, st12 14. Acold rolled steel strip: material: q195, 65mn 15. Acold rolled prime carbon steel plate: material: 08als, dc03, dc04, 20#, 40# 16. Acold rolled deep drawing steel coil: material: dc06-a, st14, spcen, st16, 08al 17. Aalloy sheet: material: 12crmov, 15crmo, 12cr1mor, 35-42crmo, 40cr 18. Structural alloy sheet: material: 30crmnsia-30crmnsia sheet, 20cr, 40cr sheet, 12crrmo, 40cr, 42crmo
We are one of the largest ten steel exporter and importer in china.We supply different kinds of hot/cold rolled steel plate as follows: Steel garde: q235b/ss400/a36/dc01/dc02/dc03/dc04/dc05/dc06/spcc/sphc/sgh-340/saph440/st12
1.Grade:A,B,D,E,AH32,AH36,AH40,DH32,DH36,DH40,EH32,EH36,EH40,FH36,FH32,FH40,API,SPEC,2HGr42,2HGr50,A514Gr(F,Q) 2. Specification:(T*L*W)8-650mm*3000-27000mm*1500-4020mm 3.Delivery Condition:TMCP,Q&T,N,AR,CR,A,Q and N&T 4.Adopting standards: CCS,DNV,GL,LR,BV,KR,ABS,API,RINA,NK,ASTM,GB5313 5.Process:EAF+LF+VD+Forged+Heat Treatment(optional) 6.Services: Pretreatment(derusting,lacquering,Painting,Sand clusting) test UT,HIC,Impact test,PWHT Z15,Z25,Z35 etc) Cutting,Welding,Painting,Flaw-Detection(Grade1,Grade2) 7.Payment Term:T/T,L/C 8.Trading Term:FOB,CFR,CIF,CNF 9.Delivery Time:20-38days 10.SUPPLEMENTARY REQUIREMENTS S1. Vacuum Treatment, S2. Product Analysis, S3. Simulated Post-Weld Heat Treatment of Mechanical Test Coupons, S4. Additional Tension Test, S5. Charpy V-Notch Impact Test, S6. Drop Weight Test, S7. High-Temperature Tension Test, S8. Ultrasonic Examination in accordance with Specification A 435/A 435M, S9. Magnetic Particle Examination, S11. Ultrasonic Examination in accordance with Specification A 577/A 577M, S12. Ultrasonic Examination in accordance with Specification A 578/A 578M. CCS,DNV,GL,LR,BV,KR,ABS,API,RINA,NK,ASTM,GB5313.
1.Grade:A,B,D,E,AH32,AH36,AH40,DH32,DH36,DH40,EH32,EH36,EH40,FH36,FH32,FH40,API,SPEC,2HGr42,2HGr50,A514Gr(F,Q) 2. Specification:(T*L*W)8-650mm*3000-27000mm*1500-4020mm 3.Delivery Condition:TMCP,Q&T,N,AR,CR,A,Q and N&T 4.Adopting standards: CCS,DNV,GL,LR,BV,KR,ABS,API,RINA,NK,ASTM,GB5313 5.Process:EAF+LF+VD+Forged+Heat Treatment(optional) 6.Services: Pretreatment(derusting,lacquering,Painting,Sand clusting) test UT,HIC,Impact test,PWHT Z15,Z25,Z35 etc) Cutting,Welding,Painting,Flaw-Detection(Grade1,Grade2) 7.Payment Term:T/T,L/C 8.Trading Term:FOB,CFR,CIF,CNF 9.Delivery Time:20-38days 10.SUPPLEMENTARY REQUIREMENTS S1. Vacuum Treatment, S2. Product Analysis, S3. Simulated Post-Weld Heat Treatment of Mechanical Test Coupons, S4. Additional Tension Test, S5. Charpy V-Notch Impact Test, S6. Drop Weight Test, S7. High-Temperature Tension Test, S8. Ultrasonic Examination in accordance with Specification A 435/A 435M, S9. Magnetic Particle Examination, S11. Ultrasonic Examination in accordance with Specification A 577/A 577M, S12. Ultrasonic Examination in accordance with Specification A 578/A 578M. CCS,DNV,GL,LR,BV,KR,ABS,API,RINA,NK,ASTM,GB5313.
1.Grade:A,B,D,E,AH32,AH36,AH40,DH32,DH36,DH40,EH32,EH36,EH40,FH36,FH32,FH40,API,SPEC,2HGr42,2HGr50,A514Gr(F,Q) 2. Specification:(T*L*W)8-650mm*3000-27000mm*1500-4020mm 3.Delivery Condition:TMCP,Q&T,N,AR,CR,A,Q and N&T 4.Adopting standards: CCS,DNV,GL,LR,BV,KR,ABS,API,RINA,NK,ASTM,GB5313 5.Process:EAF+LF+VD+Forged+Heat Treatment(optional) 6.Services: Pretreatment(derusting,lacquering,Painting,Sand clusting) test UT,HIC,Impact test,PWHT Z15,Z25,Z35 etc) Cutting,Welding,Painting,Flaw-Detection(Grade1,Grade2) 7.Payment Term:T/T,L/C 8.Trading Term:FOB,CFR,CIF,CNF 9.Delivery Time:20-38days 10.SUPPLEMENTARY REQUIREMENTS S1. Vacuum Treatment, S2. Product Analysis, S3. Simulated Post-Weld Heat Treatment of Mechanical Test Coupons, S4. Additional Tension Test, S5. Charpy V-Notch Impact Test, S6. Drop Weight Test, S7. High-Temperature Tension Test, S8. Ultrasonic Examination in accordance with Specification A 435/A 435M, S9. Magnetic Particle Examination, S11. Ultrasonic Examination in accordance with Specification A 577/A 577M, S12. Ultrasonic Examination in accordance with Specification A 578/A 578M. CCS,DNV,GL,LR,BV,KR,ABS,API,RINA,NK,ASTM,GB5313.
1.Grade:aisi4140, sa285grc, p265gh, p295gh, spv355, sgv410, sgv450, sgv480, (s)a515m(gr.60, 65, 70), (s)a516m(gr.55, 60, 65, 70), a42, a52, a48, 19mn6, 15mo3, 16mo3, p235gh, p295gh, hii/p265gh, p355(gh, nh, nl1), a537(cl1, cl2, cl3), (s)a516gr65, (s)a515gr65, q245r, q345r, q370r, 15crmog, 12crlmovg, 22mng, 15mnvr, 15crmor, 13mnnimor, 15mnnbr, 15mnvnr, 16mndr, 09mnnidr, 15mnnidr, 12cr2mo1r, 14cr1mor, 07mncrmovr, 07mnnicrmovdr, sb410, sb450, sb480, spv235, spv315, spv355, spv410, spv450, spv490, sbv1a, sbv1b, sbv2, sbv3, sev245, sev295, sev345, 13crmo4-5, 10crmo9-10, 11crmo9-10, 20mnhr, 20hr, 16mnhr, 161g4301cr0.5mo, 2.25cr1mo, 1.25cr0.5mo, (s)a299m, (s)a204m(gr.A, b, c), (s)a387m(gr.11, 12, 22), p235gh, (s)a662m(gr.A, b, c), (s)a302m(gr.A, b, c, d), (s)a737m(gr.B, c), (s)a738m(gr.A, b, c), 10crmo910, 15mo3, 13crmo44, 19mn6, bhw35, 13mnnimo54, (s)a533m(ó±, ó=), hó±, hó=, 2. Specification:(t*l*w)8-650mm*3000-27000mm*1500-4020mm 3.Delivery condition:tmcp, q&t, n, ar, cr, a, q and n&t 4. Adopting standards: Gb/t713, astmgb713, jisg3103, jisg3115, jisg3118, jisg3119, jisg3124, gb6645, gb3531, din17155, astm, , asme, en10028-2, en10028-2, nfa36-205, bs1501 5.Process:eaf+lf+vd+forged+heat treatment(optional) 6.Services: Pretreatment(derusting, lacquering, painting, sand clusting) Test(ut, hic, impact test, pwht z15, z25, z35 etc) Cutting, welding, painting, flaw-detection(grade1, grade2) 7.Payment term:t/t, l/c 8.Trading term:fob, cfr, cif, cnf 9.Delivery time:20-45days. Gb/t713, astmgb713, jisg3103, jisg3115, jisg3118, jisg3119, jisg3124, gb6645, gb3531, din17155, astm, , asme, en10028-2, en10028-2, nfa36-205, bs1501.
1.Grade:50Mn2V,15CrMo,20Mn2,40Mn2,20MnBi,20CrMn,30CrMo,35CrMo,42CrMo,10CrMnAl,20CrMnMo,12CrMoVNi,30CrMoSiA,15CrMo,20CrMo,30CrMo,35CrMo,20Cr,40Cr,25CrMo4,34CrMo4,42CrMo4 2. Specification:(T*L*W)8-650mm*3000-27000mm*1500-4020mm 3.Delivery Condition:TMCP,Q&T,N,AR,CR,A,Q and N&T 4.Adopting standards: ASME,ASTM,GB3077,GB11251,EN10083-1,GB/T 3077-1988 5. Process:EAF+LF+VD+Forged+Heat Treatment(optional) 6.Services: Pretreatment(derusting,lacquering,Painting,Sand clusting) test(UT,HIC,Impact test,PWHT Z15,Z25,Z35 etc) Cutting,Welding,Painting,Flaw-Detection(Grade1,Grade2) 7.Payment Term:T/T,L/C 8.Trading Term:FOB,CFR,CIF,CNF 9.Delivery Time: 18-35days 10.SUPPLEMENTARY REQUIREMENTS S1. Vacuum Treatment, S2. Product Analysis, S3. Simulated Post-Weld Heat Treatment of Mechanical Test Coupons, S4. Additional Tension Test, S5. Charpy V-Notch Impact Test, S6. Drop Weight Test, S7. High-Temperature Tension Test, S8. Ultrasonic Examination in accordance with Specification A 435/A 435M, S9. Magnetic Particle Examination, S11. Ultrasonic Examination in accordance with Specification A 577/A 577M, S12. Ultrasonic Examination in accordance with Specification A 578/A 578M. ASME,ASTM,GB3077,GB11251,EN10083-1,GB/T 3077-1988.
Provide: anti-atmospheric corrosion plate sma400, sma490, a588 Grade: sma400, sma490, sma570 / a588, a871 Adopting standards: jis g3114 / astm Specifications(t*w*l): 6--650 * 1150--4020 * 3000--18000 mm Payment item: T/T, L/C Trading item: FOB, CIF, CFR , CNF Delivery time: 20--60 days
Pressure vessel steel plate spv315, spv355, spv490, sl2n;15mnnbr, 15mnvnr 1. Grade: 20g, 16mng, 15crmog, 12cr1movg, 19mng, 22mng, 13mnnicrmonbg, 20r, 16mnr, 15mnvr, 15crmor, 15mnnidr, 12cr2mo1r, 13mnnimonbr, 15mnnbr, 15mnvnr, 16mndr, 09mnnidr, 2. Adopting standards: GB713, GB6645, GB3531, GB150, JIS G3103, JIS G3115, JIS G3118, JIS G3119, JIS G3124, DIN17155, ASTM, ASME, EN10028-2, NFA36- 205, BS1501, 3. Specifications(t*w*l): 8--500mm * 1500--4020mm * 3000--18000 mm 4. Payment item: T/T, L/C 5. Trading item: FOB, CIF, CFR , CNF 6. Delivery time: 20--60 days
Carbon structural steel plate s235jr, s275jr, st37-2;s10c-s55c;st37-2, st37-3;40a 1. Grade: Q235-q275, 10-55, 20mn-50mn, ss400, sm400(a, b), s10c-s55c, st37-2, st37-3, a36, a283(a, b, c, d), 1010-1050, 40(a, b, c, d, ee) , s235 (jr, jo, j2g3, j2g4) 2. Adopting standards: GB3274, GB711, JIS G3101, JIS G3106, JIS G4051, DIN17100, ASTM, BS4360, EN10025, EN10083-2, ISP630 , GB3274, GB711, JISG3101, JISG3106, JISG4051, DIN17100, BS4360, EN10025, EN10083-2, ISP630. 3. Specifications(t*w*l): 8--500mm * 1500--4020mm * 3000--18000 mm 4. PAYMENT ITEM: T/T, L/C 5. TRADING ITEM: FOB, cif, cfr , cnf 6. Delivery time: 20--60 days
Hot rolled steel plate
Steel plates.
Steel plate Hot Rolled plate ASTM A283, A516, A537, A573, A36 and etc ABS (1999) AH36, DH36, EH36 shipbuilding plate (S355J2G3). API 5L X42, X46, X52, X56, X60, X65.
Steel plates. In loose.
