1.Hot-dip galvanized color coated steel sheet(prepainted galvanized steel sheet)The product obtained by coating an organic coating on a hot-dip galvanized steel sheet is a hot-dip galvanized color-coated plate. In addition to the protective effect of zinc, the hot-dip galvanized color-coated sheet also protects against rust and has a longer service life than hot-dip galvanized sheet;
2.Hot-dip aluminum-zinc color coated sheet(prepainted galvalume steel sheet)Hot-dip aluminum-zinc steel sheets can also be used as color-coated substrates (55% AI-Zn and 5% AI-Zn);
3.Electroplated zinc color coated sheet The electro-galvanized sheet is used as the substrate, and the product obtained by baking with the organic coating is an electrogalvanized color-coated plate. It has a beautiful appearance and excellent processing properties, and therefore can be mainly used for home appliances, audio, steel furniture, interior decoration, and the like.
The zinc layer has uniform thickness and strong adhesion. No peeling and good corrosion resistance.The Surface is very smooth and clean,zinc flower is symmetrical,beautiful.
Galvanized Coil With the cold rolled steel of different strength and thickness as substrate, it is produced through applying the zinc coated on both faces by hot dip process.
Large inventory All products are packed and warehousedafter passing the inspection, and deliveredin one order. So as to ensure that the customer's products can be delivered in the shortest time. You don't have to worry about the quality and transportation of the goods at all.
1 grade: Q345R(ASTM Grade B)
2 Corresponding standard: GB 713-2014
Steel plates for boilers and pressure vessels
3 Category: Carbon Steel
The lower limit of C content may not be required upon agreement between the supplier and the buyer and indicated in the contract. For steel plates with a thickness greater than 60mm, the upper limit of carbon content can be increased to 0.22%.
According to the requirements of the buyer, the carbon equivalent can be specified, and the value shall be agreed by both parties. Carbon equivalent calculation CEV(%) C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15.
Total aluminum content.
Trace amounts of niobium, vanadium, and titanium may be added to the steel, and their content should be filled in the quality certificate, and the total content should not exceed 0.050%.
The content of chromium, nickel and copper as residual elements should not exceed 0.30%, and the content of molybdenum should not exceed 0.080%, and the total content of these elements should not exceed 0.70%. If the supplier can guarantee, the analysis may not be carried out.
Dimension/color/material can be customized!
Till the date we have supplied our products to 100more companies in China, Including,
Aucma Company Limited(600336)
Guanhzhou Wanbao Group Co.,Ltd.
Homa Appliances Co.,Ltd.
Jiangsu Green Electric Appliances Co.
Gree Electric Appliances Inc. of Zhuhai
Xiangxuehai Electric Appliances Co.,Ltd. (Xxh Group),etc.
The Side/back plate of their products are manufactured by us.
4002 Steel Plates Suppliers
Short on time? Let Steel Plates sellers contact you.
High Strength Steel Plates In accordance with the technical evolution, structures or pressure vessels are becoming bigger and more highly pressurized recently. To maintain the safety of those structures,consequently, customers have required high strength steel plates with good weldability and high toughness.
Advantages of High Strength Steel Plates
High Strength
Good Weldability
Excellent Notch Toughness
Excellent Uniformityand Clean Surface
Good Workability
Wide Range of Sizes
Applications:
Bridges
Various Offshore Structures
Gates,Penstocks
Civil Engineering and Industrial Machinery
;A588 Grade A Weather Resistant Steel Description
A588Gr. A is a corrosion resistant steel, also can be called weathering resistant steel or atmosphere corrosion resistant steel. A588Gr. A also is a high strength low alloy steel, so it is suitable for a lot of applications exposed the weather condition.
;A588 Grade A Weather Resistant Steel will be a trend
A588Gr. A steel is becoming more popular by roll formed product end-users. Its unique look and naturally oxidizing finish make it especially desirable for many architectural projects. A588Gr. A has increased resistance to atmospheric corrosion when compared to other steels. A588Gr. A resists the corrosive effects of rain, snow, ice, fog, and other meteorological conditions by forming a coating of dark brown oxidation over the metal, which inhibits deeper penetration and save the cost for painting or rust-prevention maintenance.
;Theory of A588 Grade A Weather Resistant Steel Stop rusting
A588Gr. A Steelnever completely stops rusting. The weathering process occurs after the panel come out;It eventually decreases and from that point on the finish acts as a protective coating for the base metal.;
This protective coating essentially stops the corrosion. ;Laboratory analysis of the rust have shown that the alloying elements in the steel, such as copper, chromium, and nickel produced insoluble compounds that clogged the pores at the rust and steel interface, thereby ending the regeneration
Application of A588 Grade A
ASTM A588Gr. A is mainly used for constructions such as steel structures, bridges, tanks and containers, exhaust systems, vehicles and equipment constructions.
;A588 Grade A Delivery Condition:
Hot Rolled, Cold Rolled, Normalized, Quenched, Tempering, Thermal Mechanical Control Process (TMCP)
Chemical composition and Mechanical property of A588 Grade A
Grade C% Si% Mn% P% S% Cu% V% Cr% Ni%
A588Gr.A 0.19 0.30-0.65 0.8-1.25 0.050 0.040 0.25-0.40 0.02-0.10 0.4-0.65 0.40
What is COR-TEN A Steel?
COR-TEN A is a corrosion resistant steel, also can be called weathering resistant steel or atmosphere corrosion resistant steel. Exposing the weather condition, the surface of COR-TEN A can develops a layer patina, which can protects the steel from deeper corrosion. COR-TEN A also is a high strength low alloy steel, so it can used in higher strength and longer period cycle material conditions.
Why COR-TEN A Steel Became So Popular?
COR-TEN A steel is becoming more popular by roll formed product end-users. Its unique look and naturally oxidizing finish make it especially desirable for many architectural projects. COR-TEN A has increased resistance to atmospheric corrosion when compared to other steels. COR-TEN A resists the corrosive effects of rain, snow, ice, fog, and other meteorological conditions by forming a coating of dark brown oxidation over the metal, which inhibits deeper penetration and save the cost for painting or rust-prevention maintenance.
How COR-TEN A Stop Continue Rusting
COR-TEN A Steel never completely stops rusting. The weathering process occurs after the panel come out. It eventually decreases and from that point on the finish acts as a protective coating for the base metal.
This protective coating essentially stops the corrosion. Laboratory analysis of the rust shown that the alloying elements in the steel, such as copper, chromium, and nickel produced insoluble compounds that clogged the pores at the rust and steel interface, ending the regeneration.
Application of COR-TEN A
ASTM COR-TEN A is mainly used for the manufacture of container, rolling stock, oil rigs, harbor construction, oil platforms and other structural parts containing hydrogen sulfide corrosive media in petrochemical equipment.
COR-TEN A Delivery Condition:
Hot Rolled, Cold Rolled, Normalized, Quenched, Tempering, Thermal Mechanical Control Process (TMCP)
Chemical composition and Mechanical property of COR-TEN A
Grade C% Si% Mn% P% S% Cu% Al% Cr% Ni%
COR-TEN A 0.12 0.25-0.75 0.2-0.5 0.07-0.15 0.030 0.25-0.55 0.015-0.06 0.5-1.25 0.65
Offer:asme-285gra-pressure-vessel-boiler-steel-plate|steel-sheets.
Asme-285gra, pressure-vessel-boiler-steel-plate|steel-sheets is widely used in the fabrication of boilers and pressure vessel,
Such as petroleum, chemical, gas industry and power plants.
1.Steel grade:asme(sa)-285gra steel-plate
2.Steel standard:asme285
3.Specification(t*w*l):5-200mm*1220-4200mm*5000-18000mm
4.Services:ut (ultrasonic examination), ar(as hot rolled only),
Tmcp(thermal mechanical control processing), n(normalized),
Q+t(quenched and tempered), z direction test(z15, z25, z35) ,
Charpy v-notch impact test, hic test, ndt ,
Pwht( simulated post weld heat treatment)
Nace0175 the third party test (such as sgs test),
Coated or shot blasting and painting, cutting.
5.Asme(sa)-285gra chemical composition(%):
C:0.17 mn=0.98 si:0.08-0.45 p:0.035 s:0.035
6.Asme(sa)-285gra mechanical property:
Tensile strength(mpa):310 yield strength(mpa):165
7.Payment:t/t, l/c
8:trading terms:cif/fob/cnf/cfr
9:delivery time:7-30 days
Henan hzz iron and steel co.Ltd is the most valued member of hbis in china.As the largest agent of hbis, it had cooperate with shouqin mill,
Tang mill, wuyang mill more than twenty years. At the same time, there are 32 steel warehouse in zhengzhou, anyang, wuxi, kunshan, tianjin, shanghai,
Nanjing and jinan city. And support welding, shot blasting, painting and other relevant machining work.
Provide:corten a-corten b-weather-resistant-steel-plate-steel-sheets.
Corten a-corten b-weather-resistant-steel-plate is widely used in vehicle, bridge, tower, container and so on.
1.Steel grade:corten a-corten b
2.Steel standard:corten
3:rolling size:thickness*width*length 4-150mm*1220-4200mm*5000-18000mm
4.Corten a chemical composition(%)
C max:0.12 si:0.20-0.50 mn:0.7-0.8 p:0.07-0.15 s max:0.030
5.Corten a mechanical property:
Yield strength(mpa):345 tensile strength(mpa):485-490 % elongation min:20
6.Heat treatment:ar(as hot rolled only), tmcp(thermal mechanical control processing), n(normalized), q+t(quenched and tempered),
7.Steel service:ut (ultrasonic examination), z direction test(z15, z25, z35), charpy v-notch impact test, hic test, ndt,
Pwht( simulated post weld heat treatment), nace0175, the third party test (such as sgs test), coated or shot blasting and painting.
8.Delivery time:7-50 days
9.Payment:t/t, l/c
10.Loading port:shanghai , tianjin, qingdao.
Henan hzz iron and steel co.Ltd is the largest agent of hbis. It had cooperate with shouqin mill, tang mill,
Wuyang mill more than twenty years. At the same time, there are 32 steel warehouse in zhengzhou, anyang, wuxi, kunshan,
Tianjin, shanghai, nanjing and jinan city. And support welding, shot blasting, painting and other relevant machining work.
Frp anti-corrosion plate is thermosetting plastic plate reinforced by glass fiber, covered with gel coat, and manufactured through one-off reaction under the high temperature of 120 with special process. High rigidity and tenacity renders the product with super-high strength resistant against bending, crushing and shocking. Strong acid and weather resistance, which can effectively prolong the service life to 30 years.
Application:
Zhongsheng frp anti- corrosion panel is specifically designed as a building solution for industrial plant, chemical plant, pickling plant, smelting plant, fertilizer plant, and industrial building at coastal high salt spray area
Chemical tes
Zhongsheng frp co., ltd has its own lab:
The panel was soaked in the test solution (20% sulfuric acid, 20% hydrochloric acid and 20% nitric acid) at room temperature for three months, and no chemical corrosion phenomena occurs.
An ideal anti- corrosion panel
-light weight,
-high corrosion resistance,
-excellent weathering characteristics,
-high-impact resistance
-easy to repair
-high gloss surface finish effect
Tie plate is steel rail base plate, There are several model of the tie plate. length*width: 200*200,200*300,200*400 etc. Customer can provide drawings and our company will produce as the drawing.
Steel plates are often used for structural and construction applications, pressure vessels, marine and offshore equipment, and military applications. It can be used anywhere where a connection between 2 beams is required. They are used for base plates, end plates, stiffeners, gussets, tabs, splice plates and many more. In some cases they add strength to a beam when welded along the length of a beam (top or bottom).
We fabricate the flat steel bars in numerous sizes grades and thickness. An exceptional process is used to manufacture high tensile flat steel bars that are used in construction of preengineered structure.
Available Sizes
40X5 mm
120X25 mm
Our wide size range in flats and consistent quality make us a preferred choice for stockists and distributors.
4002 Steel Plates Suppliers
Short on time? Let Steel Plates sellers contact you.
