Asian Steel Coils Suppliers and Manufacturers

Silicon nitrides (Si3N4) are a range of advanced engineering ceramics characterised by high strength, toughness and hardness and excellent chemical and thermal stability. The current interest in silicon nitride based engineering materials essentially developed from the research in the 1980s into ceramic parts for gas turbine and piston engines. It was envisaged that an engine, predominately made from silicon nitride based parts, such as sialon, would be light weight and be able to operate at higher temperatures than traditional engines resulting in higher efficiencies. Ultimately however, this goal was not realised as a result of a number of factors including cost, the difficulty in reliably fabricating the parts and the inherent brittle nature of ceramics. However, this work led to the development of a number of other industrial applications for silicon nitride based materials, such as in metal forming, industrial wear and molten metal handling.

Offer Galvanized sheet iron $ 600 per ton Minimum order 100,000 tons Hot rolled iron sheet $ 480 per ton The minimum order is 100,000 tons Cold drawn sheet iron $ 547 per ton The minimum order is 100,000 tons Iron plate 387 dollars per ton The minimum order is 1000000 tons Reinforcing iron $ 547 per ton, minimum order of 200,000 tons Railway rails $ 300 per ton The minimum order is 500,000 tons Prices decrease as the quantity of contracts increases Shipping and insurance charges add $ 28 per ton Available within the Kingdom and available for export to all countries of the world We are the direct contracting agents 00966592230030 صاج Ù?جÙ?Ù?Ù? ٦٠٠ دÙ?Ù?ار Ù?Ù?Ø·Ù? اÙ?حد اÙ?ادÙ?Ù? Ù?Ù?Ø·Ù?ب ١٠٠٠٠٠ Ø·Ù? صاج Ù?سحÙ?ب عاÙ?حار ٤٨٠ دÙ?Ù?ار Ù?Ù?Ø·Ù? اÙ?حد اÙ?ادÙ?Ù? Ù?Ù?Ø·Ù?ب ١٠٠٠٠٠ Ø·Ù? صاج Ù?سحÙ?ب عاÙ?بارد ٥٤٧ دÙ?Ù?ار Ù?Ù?Ø·Ù? اÙ?حد اÙ?ادÙ?Ù? Ù?Ù?Ø·Ù?ب ١٠٠٠٠٠ Ø·Ù? حدÙ?د بÙ?Ù?ت ٣٨٧ دÙ?Ù?ار Ù?Ù?Ø·Ù? اÙ?حد اÙ?ادÙ?Ù? Ù?اطÙ?ب ١٠٠٠٠٠ Ø·Ù? حدÙ?د تسÙ?Ù?Ø­ ٥٤٧ دÙ?Ù?ار Ù?Ù?Ø·Ù? اÙ?حد اÙ?ادÙ?Ù? Ù?Ù?Ø·Ù?ب ٢٠٠٠٠٠ اÙ?Ù? Ø·Ù? Ù?ضباÙ? سÙ?Ù? حدÙ?دÙ?Ù? ٣٠٠ دÙ?Ù?ار Ù?Ù?Ø·Ù? اÙ?حد اÙ?ادÙ?Ù? Ù?Ù?Ø·Ù?ب ٥٠٠٠٠٠ Ø·Ù? تÙ?Ù? اÙ?اسعار Ù?ع زÙ?ادÙ? Ù?Ù?Ù?Ù? اÙ?تعاÙ?د تضاÙ? Ù?صارÙ?Ù? شحÙ? Ù?تاÙ?Ù?Ù? ٢٨ دÙ?Ù?ار Ù?Ù?Ø·Ù? Ù?تاح داخÙ? اÙ?Ù?Ù?Ù?Ù?Ù? Ù?Ù?تاح Ù?Ù?تصدÙ?ر Ù?جÙ?Ù?ع دÙ?Ù? اÙ?عاÙ?Ù? Ù?Ø­Ù? اÙ?Ù?Ù?Ù?اء Ù?Ù?تعاÙ?د Ù?باشرÙ?

AVAILABLE RANGE :-Corten Steel Plate, Corten A Steel Plates, Corten B Steel Plates, Corten Steel IRSM 41 Grade & Corten Steel ASTM A588 GR.A, S355J2W Plate, S355J2W+N Plate, ASTM A242 Steel Plate, EN 10025-5 S355JOWP Steel Plate, S355J2WP Steel Plate, S355JOW Steel Plate, Corten High Wear Resistant Steel Plate, Weathering Steel, Corrosion Resistant Plate. SCOPE:-CORTEN A applies to plates 0.8mm to 12.5mm in thickness, CORTEN B applies to plates 1.0mm to 50.0 mm in thickness. Definition:-Corten Steel We bring froth a range of Corrosion Resistant Plates that is acclaimed for its high durability, light weight, corrosion resistance, efficiency and optimum quality. These steel plates are constructed using metal alloys with latest technology support and are thermostatically balanced. The use of weather resistant steel also makes these deliver longer service life. Applications:- The corten steel is used for various types of welded, bolted and riveted constructions e.g. steel frame structures, bridges, tanks and containers, exhaust systems, vehicles and equipment constructions. Basic guidles for the use of corten steel in the unprotected condition are described in EN 10025-5 and DASt rule 007.

Our coiled tubing reduce the risk of leakage of the instrument hydraulics. By reducing the number of joints in the system, the installation is more convenient, especially for vertically installed industrial and mining, the advantages are more obvious. The coiled tubing improves the integrity of the entire system and reduces the risk of leakage, greatly reducing maintenance costs. Our coiled tubes can be used as oil and gas downhole control lines, chemical injection lines, instrumentation lines, electric mixing lines or steam heating lines, pre-insulation lines, flue gas pipes, heater coils, etc. Material: 316L, 316, 304, ncoloy825, incoloy625, carbon steel etc. Wall Thickness: 0.5mm3mm Length: 100M5000M Pressure Bearing: 50MPA130MPA OD: 3mm-60mm

Welcome to Langfang Saint Rees Amaron Movable House Co., Ltd. ,which mainlty manufacturing the steel coils, steel profiles for suspenged ceiling and partition, also the accessories together with realated products such as screws,rock wool,fiberglss wool etc.Our products have been exported to New Zealand,Australia,Middle East area,southeast area,Europe,Africa and South America and so on. Our products: 1.Stud and track for drawall partition and ceiling 2.Galvanized steel coils/strip 3.T-bar, Tee grid suspension system 4.Screw, paper tape, mineral wool, hangers and all other accessories for metal frame Hop dipped galvanized steel coils Standard:JIS,AISI,ASTM,GB Type:Steel Coil Technique:Cold Rolled Surface Treatment:Galvanized Application:Roofing Sheet, Rolling Shutter, Sandwich Panel Special Use:High-strength Steel Plate Product Name:Zinc Coated Galvanized Steel Coil / Sheet / Strip Thickness:0.12~3.0mm Width:40-350mm Zinc Coating:40~275g/m^2 Steel Grade:SGCC, SGCH, DX51D, Q195 Application:Roofing Sheet, Rolling Shutter, Sandwich Panel Original:Tianjin, China Technique:Cold Rolled Coil Weight:1~3tons or as per your request Coil ID:508/610mm or as per your request Our Advantages: (1). Design according to customers requirements (2). Manufacture under complete quality control system---ISO9001 (3). Installation with instruction of experienced engineers (4). Easy to assemble and dismantle (5). Eco-friendly material: can be used for several times and can be recycled (6). Shorter construction period, longer using time (7). High strength and stiffness, high weight bearing. If you are interested in our products, pls feel free to contact us.

Base plate: hot galvanized steel coil, galvanized steel coil Zinc coating thickness: galvanized layer: 60-275g / m2, aluminium zinc layer: 60-180g / m2. The thickness of the substrate: 0.13-2.0mm Width: 20 ~ 1250mm Inner diameter: did you 508mm, 610mm Quality standards: EN10142, EN10326, EN10169, JIS3302, ASTMA755M, GB / T12754 Steel number: DX51D, DX52D, DX53D, S220GD, S250GD, SGCC Paint type: polyester ( PE ), polyvinylidene fluoride Exported standard packing: Inside anti-rust paper + Inside iron guard board + anti-rust paper +Peripheral antirust board + Circle iron guard board +4*4 strapping

Base plate: cold-rolled plate, hot-rolled plates Zinc coating thickness: 60-275g / m2, Al-Zn: 60-180g / m2. Plate thickness: 0.1-3.0mm Width: 20mm---1550mm Light volume inside diameter: did you 508mm, 610mm Quality standards: EN10142, EN10326, EN10169, JIS3302, ASTMA755M, GB / T12754 Steel number: DX51D, DX52D, DX53D, S220GD, S250GD, SGCC Surface structure: the normal zinc flower, small zinc flower, finishing surface, zero zinc flower Surface treatment: chromate passivation Exported standard packing: Inside anti-rust paper + Inside iron guard board + anti-rust paper +Peripheral antirust board + Circle iron guard board +4*4 strapping

1450mm 6hi cold rolling mill production capacity 1450 6-roll reversible cold rolling unit is the cold rolling production line with designed annual output of 225 thousand tons and adopts UCM-type single-stand mill. 1. Its usage To roll high quality cold rolled steel coil( plain carbon steel) 2. Brief Introduction: The production of this unit is to roll hot rolled coils with the thickness of 2.0ï½?4.5mm into high precision cold rolled coils with the thickness of 0.18ï½?1.5mm through several time of rolling. The production capacity of the cold rolling production line is a production of 225 thousand tons of cold rolled steel coils per year. Specification of Cold Rolling Mill roller Type 4-roller , 6-roller, 8-roller, 12-roller, 20-roller cold rolling mill. Stand Type single-stand reversible cold rolling mill; tandem cold rolling mill( from 3 stands to 6 stands) Size of finished products Width: from 350-1450mm; Thickness: from 0.1mm to 3.0mm Application our range of products covers all areas of the cold rolling industry, suitable for the production and upstream & downstream sectors of cold-rolled products such as plain carbon steel, stainless steel, alloy steel coil and plate. 3. Technical Data Item specification Rolling mill specification ï?? 1250/ï?? 450/ï?? 370ï?´ 1450mm Working roll size ï??370ï½?ï??330ï?´1450 mm Intermediate roll size ï??450ï½?ï??400ï?´1450 mm Max rolling pressure 18000 KN Max rolling speed 1200m/min Overall dimension (L*W*H) 25x31x11 m Finished product precision Longitudinal thickness tolerance (rolling at stable speed) ï¼?±0.005mm(dâ?¤0.5mm) ï¼?±1.0%d (dï¼?0.5mm) Longitudinal thickness tolerance (speeding up or slowing down) ï¼?±0.01mm(dâ?¤0.5mm) ï¼?±2.0%d (dï¼?0.5mm) Coil mandrel dia. of the un-coiler ï??560ï½? ï??620 mm (entire circle ï??610 mm) Coil mandrel dia. of the coiler ï??495ï½? ï??510 mm (entire circle ï??508 mm) Unit drive direction Left side of blooming pass strip heading direction Mechanical property requirements Q195ã??08Alã??Q235ã??SPHCã??SPHDã??SPHE Ï?sâ?¤380 N/mm² 1) Strip camber: â?¤5mm/2m; tower: â?¤5mm 2) Strip passband tolerance: â?¤±0.15mm; transverse difference: â?¤0.20mm 3) Uniform hardness, and no obvious defects like inclusions, sinkholes or raw edges. Input Thickness 1.2~4.5 mm Input Width: 800~1300 mm Coiling diameter: F610/F2000 mm Max coil weight 26 T Output Thickness: 0.18-1.5mm Our advantage: 1) Customized Production 2) High cost-effective product 3). All-around pre-sales & after-sales services 4) Independent intellectual property rights For more information, please feel free to contact us!

Cold Rolled Coil Most common size table Thickness (mm) : 0.3 - 4 Width (mm) : 914 - 1500 Standard : JIS, ASTM, SAE, EN

Hot Rolled Coil Most common size table Thickness (mm) : 1.2 - 1.4 Width (mm) : 1000 - 1500 Standard : JIS, ASTM, SAE, EN

color coated/prepainted galvanized/ galvalume steel coils Color and patterns: brick grain, wooden grain, flowering printing, Ral color, any color Thickness:0.135mm-1.2mm Width:760mm-1250mm zinc coating: 20g-120g/m2

Our coil transfer cart are used to transport steel coils and pipes for metal industry. This coil transfer Cars are designed to be an extremely cost effective, safe and flexible load moving alternative. Our coil transfer carts are specially designed for coil, pipe and other round material transportation. There are mounted V-shape and Roller on coil transfer cart to protect the coil stable, roller distance can be adjusted as per coil diameter, V-shape supporting and roller can also be removable from the cart for other cargo transport. The coil transfer cart was developed to dramatically reduce the material handling requirements of cranes and fork trucks while providing quick, safe and smooth movement of materials and products through manufacturing facilities. when the goods are loaded, we can make sure the cart moves safely and the goods are in a very safe condition.

Phoenix Corporation Limited , is a world international supplier of steel building materials, based in Shandong province. Mainly supply: Hot dipped Galvanized steel coil & sheet (GI coil) Galvalume steel coil & sheet,(GL coil) Pre-painted steel coil.(PPGI PPGL ) Corrugated galvanized sheet (ZINC SHEET) Embossed steel coil & sheet (EMBOSSED) Print (wooden) pattern coated steel coil (WOODEN) Pre-painted aluminium coil(PPAL) We always supply the best level quality steel coil and sheet products to our customers, all our materials from first class china-stated owned iron steel mills ,mainly in hebei province and tianjin city. for our product lines the mian parts all from japan and south korea, the product lines are the best level in china. And for pre-painted product, the paint all from Nippon, Akzonoble, KCC, beckers. and we will guarantee for the fading from 10 years. With more than 10 years steel production and international sales experience, we have confidence to give you the best service, first, we respect the international business rules , once confirmed price and specification, never changing , and we will always follow our confirmation and our contract, working with us you will never worry about the business way, also we honest with our quality , never cheating. During the production of goods, if you have no time come to china for checking , we will have QC or sales person to check the production for you , we will take video and pictures of the production and every testing details of goods then send to you, till the goods finished and packed also loaded into containers , every step of the goods production till loading to vessel, we will make you very clearly. If you want to have a stable supplier of the flat steel products , like GI/PPGI/PPGL/corrugated sheet, please fell free to contact with us , and you will know that we are the one who can be trusted of steel supplier in china. Contact with me , and let us talk about more details. Thanks and regards.

Zinc GI sheet roll/sheet metal/GI steel galvanized Made in China with prime quality

G550 Az150 55%Alu-Zinc Gi Hot Dipped Galvanized Steel in Coil

Prime RAL color new Prepainted Galvanized Steel Coil , PPGI / PPGL / HDGL / HDGI, roll coil and sheets

prepainted/ color coated galvanized steel coils

Product Item: hot dipped galvanized steel coils/ppgi&ppgl Category: Corrugated Steel plate/Roofing Sheet Thickness:0.18-2.0mm Width: according to customer requirement Zinc coating:20-275m/2 Standard: AISI, ASTM, BS, DIN, GB, JIS Colour: RAL NO.or according to customer requirements Type: Steel Plate Package: seaworthy package Originï¼?China Technique: Cold Rolled Descriptionï¼?Corrugated Metal Roofing Sheet/Galvanized Steel Coil plate/ Prepainted Corrugated Gi Color Roofing Sheets Surface Treatment: Coating Hardness: Soft hard(HRB60), medium hard(HRB60-85), full hard(HRB8

Brand: ZHONGJIN/JINHAI ; Width: 485,510,550,620,650,690,710,722,730 mm. Thickness: customized (0.21-1.8 mm) ; Edge: mill or slit.

Hot rolled coils Hot rolled coils Coil id: 508mm up to 600mm Thickness: 2mm/2.5/3/3.5/4/4.5/ up to 9mm Coil weight: 5 mt up to 10mt max.