Hot dip galvanized steel coil (gi) Grade: ss grade 33-80, sgcc, sgch, sgcd1-sgcd3, sgc340-sgc570, sgcc, dx51d Thickness: 0.2-2.0mm Place of origin: vietnam Brand name: nam kim steel group Model number: sgcc, sgch, sgcd1-sgcd3, dx51d Type: steel coil technique: cold rolled Surface treatment: galvanized Application: wide construction range, household appliance special use: high-strength steel plate width: 600-1250mm Length: as per customer's requirement Coil weight : 3-24 mt - coil id: 508/610mm Zinc coating: z50-z350 Surface of the galvanized steel coil: normal spangle, minimize spangle Spangle steel grade: ss grade 33-80, sgcc, sgch, sgcd1-sgcd3, sgc340-sgc570, sgcc, dx51d Certificate: iso9001 Payment terms: t/t or l/c Delivery time: within 25 days after received the deposit Packaging & shipping Packaging detail: standard seaworthy export package Delivery detail: according to the quantity or as per customer's request .
Hot dip galvanized steel coil (gi) Grade: ss grade 33-80, sgcc, sgch, sgcd1-sgcd3, sgc340-sgc570, sgcc, dx51d Thickness: 0.2-2.0mm Place of origin: vietnam Brand name: nam kim steel group Model number: sgcc, sgch, sgcd1-sgcd3, dx51d Type: steel coil technique: cold rolled Surface treatment: galvanized Application: wide construction range, household appliance special use: high-strength steel plate width: 600-1250mm Length: as per customer's requirement Coil weight : 3-24 mt - coil id: 508/610mm Zinc coating: z50-z350 Surface of the galvanized steel coil: normal spangle, minimize spangle Spangle steel grade: ss grade 33-80, sgcc, sgch, sgcd1-sgcd3, sgc340-sgc570, sgcc, dx51d Certificate: iso9001 Payment terms: t/t or l/c Delivery time: within 25 days after received the deposit Packaging & shipping Packaging detail: standard seaworthy export package Delivery detail: according to the quantity or as per customer's request .
Specification and structure: - standard: jis g 3321 - technology: nof (non-oxydizing furnace) - coating mass symbol: az50 ~ az200 - material thickness: 0.20 ~ 2.0 (mm) - width: 600 ~ 1250 (mm) Quality standard: Hot-dip 55% aluminium-zinc Coated steel standard - jis g 3221 Dominant characteristics: - especially produced for various usage purposes - long life of 4 times longer than other normal - effective corrosion sheets - good heat resistance The anti-finger layer is equipped: - stain-proof and oxidization resistance - keeping the surface of the products shiny for a long time - to reduce cracking, scratching coating during stamping, rolling
Specification and structure - standard: jis 3322, jis 3312 - technology: full reverse roll coating - coating thickness: 10-30/15-30 micron - material thickness: 0.25 ~ 1.2 (mm) - width: 600 ~ 1250 (mm) Namkim color - pre-painted zinc-aluminium coated steel is made by nof hot-dip zinc-aluminium alloy coated steel material on the advanced technology and production line, diversified colors, lifespan many times longer than other pre-painted zinc coated steel, weathering resistance and good heat-protective effect.
Our superior quality GP coils have been preferred for use in the automobile industry and construction sites. Our coils have consistent thickness throughout - this is a result of our strict quality control process. To add, our GP Coils can be very easily installed without incurring additional expenses. Specification : Descriptions Thickness : 0.11 mm to 2.0 mm Width : 19 mm to 1250 mm Zinc Coating : 80 to 275 gsm
Our high grade CRCA (Cold Rolled Close Annealed) coils are widely used in various industries such as automobile, pharmaceutical, chemical, oil and gas industries. We guarantee that we meet our clients requirements by providing an assortment of grades and thicknesses of these coils. Hence, more clients prefer our coils due to these and our unfailing adherence to industry standards. Specification : Descriptions Thickness : 0.35 to 3.2 mm Width : 750 to 1870 mm Grades : CQ, DQ, DDQ, EDDQ, IF, HIF, HSS, Bake Hardening, High Strength Micro Alloyed, C-Mn High Strength, Rephosphorized, Dual Phase
Our colour coated (pre-painted) GI coils consistently meet strict industry and quality standards. Apart from the organic coatings, our process ensures that the coils are coated in their entirety, leaving no gaps, especially at the edges. We have these in varying degrees of thickness - well suited to different requirements of our diverse clientele. Specification : Descriptions Coating Weight : Upto 275 gsm (Zinc) Coil Thickness : 0.25 to 1.50 mm Coil Width : 900 to 1335 mm Paint System : Primers, Epoxy, PU, Polyester / Universal Top Coat: RMP/SMP/PVDF/SDP Backer Coat: Epoxy, Polyester and PU Gloss : Matt – 35% (+/-5%) Semi-gloss – 60% (+/-5%) High gloss > 70% Profiles : Sinusoidal, Trapezoidal, Ribbed, Mangalore Tiled
Our collection of HR (Hot Rolled) Coils find applications in various requirements such as welding, laser cutting, forming, deep drawing and bending, to name a few. We supply HR coils in a varying thicknesses to fulfil the varied requirements of our diverse clientele. Our clients prefer our HR coils based on the quality control and reputation of our manufacturing process. Specification : Descriptions Thickness : 1.2 to 25.4 mm Width : 900 to 2100 mm Grades : Re-rolling/ Drawing Grades Tube and Pipe/ Forming Grades Structural/ Medium Tensile Tube/ Forming Grades LPG/ Low Pressure Vessel Grades HSLA Grades Medium Carbon Grades Weather Resistance Grades Line Pipe Grades Chequered Plates
Steel Products with all types of specifications, grades and specified dimensions with required tolerance limit. Hot Rolled Coil (HRC) & Cold Rolled Coil (CRC) Rolled Coils used in industrial and commercial application are available in various thickness range.
1) Capacity: about 15, 000 tons per month for the steel sheet and coil product. 2) grade: sgcc, dx51d, q195, all according to the customer's request 3) standard: jis g3302 1998, astm a653m/a924m 2004, all according to the customer's request 4) thickness: 0.14-2.0mm , all available. 5) width: 1000mm - 1500mm , all available. 6) length: we can adjust the length according to your request 7) elongation: min. 7% 8) zinc coating weight: min. 40gm/mm2, double side 9) tensile strength: 28.1 - 49.2kgf/mm2 10) spangle: regular spangle, minimized spangle and zero spangle 11) surface treatment: chemical passivating treatment, oils, passivating oils. 12) edge: mill edge, cut edge 13) min trial order 20 ton each thickness, 1x20' per delivery Thickness Width Length Zin coatin As your request 40g/m2-275g/m2 Process: Pay off reel double cut shear welder-notcher entry accumulator pre cleaning section furnace hot bridle zinc pot air knife after cooler water quench dryer skin pass mill dryer tension leveler â??dryer chemical coater chemical oven cooler exit accumulator oiler exit shear tension reel.
Grade: gb/t-12754: 2006, jis3302, en 10142, astm a653, jis g3302, Sgcc/sgch, gb/t2518, european standard, astm a792, jis g3321, jis g3317 Base plate: cold rolled steel sheet, hot dipped zinc coated steel sheet, hot dipped a-z coated steel sheet Equipment:double coating double baking; three coating three painting Capacity:5000mt/month Size:thickness 0.16mm0.9mm, width 600mm250mm Zinc coating: 40g-275g Paint thickness: top:20+-5um, back:5-7um Coil wgt: 3mt - 8mt Coil id: 508mm, 610mm Base sheet:cold rolled steel sheet, hot dipped zinc coated steel sheet (small, regular or zero spangle), hot dipped a-z coated steel sheet Surface paint: ep, pe, hdp, smp, pvdf Color series: ral color number series
Material:q195, q235, a36, ss400, q345, st37-2, etc Standard :jis g3002 gb/t251b Technique:hot rolled Thickness:1.2mm to 200mm Tolerance of thickness:+/-0.03mm Width:530mm-1500mm Tolerance of width:+/-5.00mm (aiming to +/-2.00mm) Normal width:914mm, 1000mm, 1200mm, 1219mm, 1250mm, 1500mm Length: according to requirement Coil id: 508mm-610mm Coil weight: 4~8 metric tons Surface: black, chromate, fingerprint resistant treatment, slight oiled or non-oiled, dry Port of loading:tianjin port Packaging details:standard export packing or according to the clients required Delivery timewithin 30 days after received 30% deposit Payment terms: l/c, t/t
Thickness :0.18-3.0mm Width:680mm-2000mm or 1000/1200/1219mm/1250mm Finish:general, bright, dull and mirror finish, oiled or non-oiled Coil weight:5-12 tons. Packing:as client's requirement Certificate:iso9001:2008 Standard:gb11253-89, jis g3141, din1623, en10130 Application 1.Common structural parts and parts for drawing in engineering machines 2. Transportation machine construction machines, lifting machine, 3. Agricultural machines, light and civil industrial, household appliance industries. 4. Chemical equipments, drive casing pipe and light industrial civil industries.
1. Width: 600-1570mm 2. Thickness: 0.13-5.0mm 3. Grade: jis g3302-sgcc-sgc570, sgch (full hard-g550), sghc-sgh540d En10346-dx51d+z, dx53d+z, s250gd-s550gd Astm a653-cs-b, ss255-ss550 4. Coil weight: 3-14mt 5. Coil id: 508mm / 610 mm 6. Chemical treatment: chromated (cr 3+, 6+, 0+) 7. Surface: skin-pass / non skin-pass 8. Oil: slight oiled / dry 9. Spangle: regular / zero / big 10. Zinc coating: z50gr/m2~z400gr/m2 (both side total coating thickness) 11. Packing: export standard packing: plastic film + water proof paper + steel plate+ packing steel strip 12. Capacity: 1, 500, 000mt / year 13. Moq: 40mt per size, or by negotiation 14. Loading port: tianjin port or other port 16.Standard export packing: plastic film + water proof paper + steel plate+ packing steel strip - Standard export packing: plastic film + water proof paper + steel plate+ packing steel strip
Dear, Good day! Products information: HR PO coils SIZE RANGE: 3.4 - 4.25 MM X 914 - 1219 MM X C MATERIAL: HARD QUANTITY: 70 MT ORIGIN: TAIWAN PAYMENT: 100% LC at sight
This is Susan from Shanghai. We have our own manufacture of HDG steel coils in China. Welcome you any customer from the world who needs galvanized steel coils, prepainted galvanized steel coils or gavalume steel coils.
Standard: AISI,ASTM,GB Grade: SGCC, DX51D, SGCH, Thickness: 0.12-5*600-1250*C Place of Origin: Shandong, China (Mainland) Brand Name: FCIS Type: Steel Coil Technique: Cold Rolled Surface Treatment: Galvanized Application: Other Special Use: High-strength Steel Plate
corrugated sheet Grade Q195, SGCC, SGCH,CGCC,CGCH Standard JIS, GB, ASTM,DIN Base Plate Cold Rolled Steel Coil, hot dipped steel coil Zinc/Aluzinc Non-alloyed or alloyed galvanized(GI/GL) Coating Zinc/Aluzinc GI&PPGI:50-140g/m2 GL&PPGL:40-160g/m2 Thickness 0.14-0.60mm Width 750-1200mm(BC),665-1050mm(AC) 1.Raw material width 762mm, the width of after corrugated is 665mm, 9 wave corrugated steel 2.Raw material width 914mm, the width of after corrugated is 800mm, 11 wave sheet 3.Raw material width 1000mm,the width of after corrugated is 875 or 900mm,12 wave Surface Corrugated(wave or Trapezoid), Galvanized processing Wave depth 18(+/-2mm) Product Feature Water resistance, light weight, easy installation, aesthetic, high tensile Packing Standard export seaworthy packing Delivery Time Within15-50days after getting the deposit or L/C Exported:Southeast Asia, Africa, the South America and the Middle countries Ea st
with GI and GL as the substrate, after surface pre-treatment, paint coating, baking and cooling, an organic protective film is formed on the steel substrate. It has strong durability, corrosion resistance, decoration and formability, widely used in consstruction, household appliances, solar energy, transportation and other industries.
Products information: CR1B coils SIZE RANGE: 0.044-2.2 MM X 836-1227 MM X C MATERIAL: HARD QUANTITY: 50 MT ORIGIN: TAIWAN PAYMENT: 100% LC at sight
