ARK Steel Tube Small Diameter Stainless Steel Tube Description: Product Name Small Diameter Stainless Steel Tube ASTM A312 TP304 TP321 � Seamless Tube Steel Grade TP304, TP304L, TP316, TP316L, TP321, TP247H, etc. Size range OD: 3.2-25.4MM WT: 0.2-2.5MM L: In straight length or In coil. Application Automotive Industry:� Engine, Transmission, Brake &� Fuel Chassis Systems. Power train Systems. Fluid Systems, etc. Aircraft/Aerospace: Fluid Transfer Lines, Fire Suppression Systems, Satellite Guidance Systems, Heat Exchangers, etc. Electrical: Electrical Fittings, Connectors, etc. Industrial: Flow Control, Pressure Control, Gauge Systems, Automation Controls, etc. Delivery Condition: AP: Annealed and Pickled BA: Bright Annealed MP: Mechanically Polished ARK STEEL TUBE owns three mills mainly produce seamless carbon steel tubes, alloy seamless steel tubes, seamless&welded stainless steel tubes, as well as nickel alloy tubes.� � � � Product Standard Material Seamless Nickel&Nickel Alloy Tube ASTM B163, B407, B444, B622, B677, etc. UNS N02200, N02201, N04400, N06600,� N06601, N06690, N06025, N06603, N06686, N08120, N08800, N08810, N08811, N08801, N08825. Seamless&Welded Stainless Steel Tube ASTM A213, A249, A268, A269, A312, A789, etc. 304/L, 316/L, 314, 321, 347H, 316Ti,� 316LMod, 317L/N, 310S, 253MA, 330, 904L,� � S31803, S32205, S32750, S31254, XM-19, TP410, TP405, TP420, TP430,� TP430Ti, TP403, TP409, TP444,TP439, TP446, etc. Seamless Carbon&Alloy Steel Tube ASTM A179, A192, A210, A213, DIN17175, EN10216-2, etc. Gr.A1, GR.C, T2, T5, T9, T11, T12, T17, T21, T22, T23, T24, T36, T122, 15Mo3, 16Mo3, P235GH, P265GH, 13CrMo44, etc. Available grades for tube and pipe is as below. Ferrite/Martensite: TP410, TP405, TP420, TP430, TP430Ti, TP403, TP409, TP444, TP439, TP446, etc. Alloy Steel Grade: T1, T1a, T2, T5, T9, T11, T12, T17, T21, T22, T23, T24, T36, T122, P12, P5, P91, 15Mo3, 12CrMo, 15CrMoG, 1Cr5Mo, 27SiMn, 09Cr2AlMoRe, 09CrMoAl, 13CrMo44, 10CrMo9-10, 09CrCuSb, 09MnNiD, 09MnD, 09CuPCrNi, 07Cr2AlMo, etc. Austenitic/Super Austenitic Steel Grade: 304/304L, 316/316L, 314, 321, 347H, 316Ti, 316LMod, 317L/N, 310S, 253MA, 330, 904L, S31254, XM-19, etc. Nickel Alloy Grade: N02200/2201, N04400, N06600, N06601, N06625, N06852, N06219, N06690, N08800/8810/8811, N08825, N08028, N08535, N08904, N08925, N08926, N010276, N06022, etc. Duplex/Super Duplex Stainless Steel: S31803, S32304, S31500, S32550, S32750, S32760, etc. Carbon steel tube:A179,A192,A210,DIN17175,etc. Size range:� OD: 3-813mm� WT: 0.05-120mm� Our product enjoys a good reputation in the market of the USA, Canada, Brazil, Mexico, Germany, Italy, Netherland, Britain, Australia, Russia, South Korea, Thailand, Philippines, Malaysia, Iran, South Africa, Ghana and etc. If you have any demands or inquiries, please feel free to send it to us.
Dealing In Various Grades Of Carbon Steel, Free Cutting Steel, Alloy Steel, Stainless Steel.
Stainless steel wires Wires for Cold Heading & Fasteners: Wires for Ball Making Cold drawn wires are produced in various sizes & grades with controlled tolerances & chemistries for manufacturing of precision Stainless steel balls used for domestic & industrial applications. Various grades of Wires are available for cold heading & fastener applications. Supply conditions include soft annealed & soap drawn wires for production of nails, nuts, bolts & screws. Wires for Spring: Soap coated & bright drawn wires are produced with controlled chemistries to ensure forming consistency and reproducibility. Wires are produced as per ASTM A313 and supplied on metal carriers and spools. Heat Resistant Wires: Grades are produced with controlled chemistry for better heat resistance. Wire rod, bars & wires are available for various applications including refractory anchors, conveyor belts for food processing industry, cold heading & fasteners. Wires for Ball Making: Cold drawn wires are produced in various sizes & grades with controlled tolerances & chemistries for manufacturing of precision Stainless steel balls used for domestic & industrial applications. Wires for Braiding, Weaving, Knitting & Filters: Bright and matt finish wires are available in sizes 0.20 mm to 5.0 mm with consistent surface finish and high corrosion resistance properties. Wires are supplied on spools and in coils. EPQ Wires: Aesthetically superior wires are produced from 1.6 mm to 8.0 mm for electro-polishing & electro-plating processes for manufacturing White Goods and Consumer Durables.
Stainless Steel Wire Rod & Bars are available in Austenitic,, Martensitic, Ferritic, Duplex & low Nickel - high Manganese, (200 series grades) for further forming, drawing, machining, and cold heading & fastener applications. Wire Rod Coil Weight : 500 - 650 kg Size Range : 5.5 mm to 26.3 mm Supply Condition : Hot Rolled & HRAP
Overview Supply Condition Soft Annealed (Matt/Bright) 1/4 Hard, 1/2 Hard, Full Hard, Spring Hard, EPQ Size Range 0.20 mm to 18.0 mm Coil Weight 10 kg to 650 kg Packing Coils with / without metal carriers Core packing with pallet Drum packs Cheese wound / Euro Coils / Spools Fine Wire Size : 0.200 mm to 0.800 mm Surface Finish : Bright Condition : Soft Annealed, Bright Hard Drawn Plastic Spool Size : DIN 160/DIN 200/DIN 250 Weight 4-6 Kg./10-12 Kg/18-20 Kg.
Stainless Steel Rods
a. Name of product – Hot Rolled Coil (HR Coil) b. Price of product – FOB – USD 575 – to USD 590 per metric ton c. Product origin - India d. Key Specifications/Special Features – Base grade (2.5 mm thick) e. Harmonization System (HS) Code : - 72253090 f. Minimum Order Size : - Minimum 25 metric ton g. Packaging details – As per standard practice of the manufacturer
Stainless steel bars Size Range : 2.00 mm to 84.00 mm Tolerances : h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320 Length : 1000 - 12000 mm Packing : 100 - 1000 kg bundles Supply : Hot Rolled, Hot Rolled & Annealed, Cold drawn Condition & Polished, Peeled & Polished, Strain Hardened (Class 1 and 2)
Stainless steel rods Coil Weight : 500 - 650 kg Size Range : 5.5 mm to 26.3 mm Supply Condition : Hot Rolled & HRAP
Stainless Steel Wire Rod & Bars are available in Austenitic,, Martensitic, Ferritic, Duplex & low Nickel - high Manganese, (200 series grades) for further forming, drawing, machining, and cold heading & fastener applications. Bars Size Range : 2.00 mm to 84.00 mm Tolerances : h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320 Length : 1000 - 12000 mm Packing : 100 - 1000 kg bundles Supply : Hot Rolled, Hot Rolled & Annealed, Cold drawn Condition & Polished, Peeled & Polished, Strain Hardened (Class 1 and 2) Cold Finished Bars for precise engineering Hardened & Tempered (QT), Solution Annealed & Soft Annealed bars, are produced in standard and customized lengths for demanding, applications like Cylinder Shaft, Pumps & Valves and Oil & Gas, Industry. Bars for Free Machining Austenitic, Ferritic and Martensitic free machining grades are produced, with Calcium Silicide (Ca-Si) treatment. Sulphur levels of 0.15-0.35%, are maintained for improved machining and better tool life.
Stainless Steel Wire Rod & Bars are available in Austenitic,, Martensitic, Ferritic, Duplex & low Nickel - high Manganese, (200 series grades) for further forming, drawing, machining, and cold heading & fastener applications. Bars Size Range : 2.00 mm to 84.00 mm Tolerances : h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320 Length : 1000 - 12000 mm Packing : 100 - 1000 kg bundles Supply : Hot Rolled, Hot Rolled & Annealed, Cold drawn Condition & Polished, Peeled & Polished, Strain Hardened (Class 1 and 2) Cold Finished Bars for precise engineering Hardened & Tempered (QT), Solution Annealed & Soft Annealed bars, are produced in standard and customized lengths for demanding, applications like Cylinder Shaft, Pumps & Valves and Oil & Gas, Industry. Bars for Free Machining Austenitic, Ferritic and Martensitic free machining grades are produced, with Calcium Silicide (Ca-Si) treatment. Sulphur levels of 0.15-0.35%, are maintained for improved machining and better tool life.
Stainless Steel Wire Rod & Bars are available in Austenitic,, Martensitic, Ferritic, Duplex & low Nickel - high Manganese, (200 series grades) for further forming, drawing, machining, and cold heading & fastener applications. Wire Rod Coil Weight : 500 - 650 kg Size Range : 5.5 mm to 26.3 mm Supply Condition : Hot Rolled & HRAP
a. Name of product – TMT bar b. Price of product – FOB –USD 565 to USD 580 per metric ton c. Product origin - India d. Key Specifications/Special Features – Construction grade (8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 36mm thick) e. Harmonization System (HS) Code : - 72141090 f. Minimum Order Size : - Minimum 25 metric ton g. Packaging details – As per standard practice of the manufacturer
Stainless Steel Wires
Stainless steel rods Coil Weight : 500 - 650 kg Size Range : 5.5 mm to 26.3 mm Supply Condition : Hot Rolled & HRAP
Stainless steel bars Size Range : 2.00 mm to 84.00 mm Tolerances : h8, h9, h10, h11, k12, DIN 1013, A484, GRIT 240 & 320 Length : 1000 - 12000 mm Packing : 100 - 1000 kg bundles Supply : Hot Rolled, Hot Rolled & Annealed, Cold drawn Condition & Polished, Peeled & Polished, Strain Hardened (Class 1 and 2)
â?¢ Stainless steel wires ï?¼ Wires for Cold Heading & Fasteners: Wires for Ball Making Cold drawn wires are produced in various sizes & grades with controlled tolerances & chemistries for manufacturing of precision Stainless steel balls used for domestic & industrial applications. Various grades of Wires are available for cold heading & fastener applications. Supply conditions include soft annealed & soap drawn wires for production of nails, nuts, bolts & screws. ï?¼ Wires for Spring: Soap coated & bright drawn wires are produced with controlled chemistries to ensure forming consistency and reproducibility. Wires are produced as per ASTM A313 and supplied on metal carriers and spools. ï?¼ Heat Resistant Wires: Grades are produced with controlled chemistry for better heat resistance. Wire rod, bars & wires are available for various applications including refractory anchors, conveyor belts for food processing industry, cold heading & fasteners. ï?¼ Wires for Ball Making: Cold drawn wires are produced in various sizes & grades with controlled tolerances & chemistries for manufacturing of precision Stainless steel balls used for domestic & industrial applications. ï?¼ Wires for Braiding, Weaving, Knitting & Filters: Bright and matt finish wires are available in sizes 0.20 mm to 5.0 mm with consistent surface finish and high corrosion resistance properties. Wires are supplied on spools and in coils. ï?¼ EPQ Wires: Aesthetically superior wires are produced from 1.6 mm to 8.0 mm for electro-polishing & electro-plating processes for manufacturing White Goods and Consumer Durables.
Thickness: 0.3-3.0 mm Outer Diameter: 6-159 mm Standard: JIS, AISI, ASTM, GB, DIN, EN Place of Origin: China Brand Name: xiangdangdang Model Number: 200 300 Series Type: Welded Seamless Steel Grade: 200 300 Series Application: decoration,construction,furniture etc. Certification: ISO Welding Line Type: ERW Tolerance: �±3% Processing Service: Welding, Cutting Grade: stainless steel Shape: Round.Square.Rectangle.Slot etc. Surface: 180G, 320G, 400G Satin / Hairline Finish: 400G, 500G, 600G or 800G Mirror finish
Grade: 200 300 Series Standard: JIS, AISI, ASTM, GB, DIN, EN Length: 2440m or as customers' request Width: 1000.1219.1220.1250.1500 mm Place of Origin: China Brand Name: xiangdangdang Model Number: 200 300 SerIes Type: Plate Application: Decoration construction, upholstery,etc. Certification: ISO Tolerance:±3% Processing Service: Welding, Cutting Surface: 180G, 320G, 400G Satin / Hairline Surface finish: 400G, 500G, 600G or 800G Mirror finish Color: Blue,black,rose gold etc. Packaging Details n bundles with seaworthy wooden pallets or as per requirement. The inner size of container is below: 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Port Shenzhen/Guangzhou port China Name mirror stainless steel sheet Standard ASTM A554, A249, A269 and A270, A312 Material Grade 201 ( Ni 0.8%), 202 (Ni 3.5%~4.5%), 301(Ni 5%) 304 (Ni 8%, Cr 18%), 316 (Ni 10%, Cr 18%), 316L (Ni10%~14%), Outer Diameter 6mm--159mm Thickness 0.3mm - 3.0mm Length 6m or as customers' request a) Outer Diameter: +/- 0.2mm Tolerance b) Thickness: +/- 0.02mm c) Length: +/- 5mm Surface 180G, 320G, 400G Satin / Hairline 400G, 500G, 600G or 800G Mirror finish Application Decoration construction, upholstery, industry instrument Test Squash test, extended test, water pressure test, crystal rot test, heat treatment, NDT Chemical Composition of Material Material Composition 201 202 304 316 430 C 0.15 0.15 0.08 0.08 0.12 Si 1.00 1.00 1.00 1.00 1.00 Mn 5.5-7.5 7.5-10 2.00 2.00 1.00 P 0.06 0.06 0.045 0.045 0.040 S 0.03 0.03 0.030 0.030 0.030 Cr 16-18 17-19 18-20 16-18 16-18 N 3.5-5.5 4-6 8-10.5 10-14 Mo 2.0-3.0 Material Item 201 202 304 316 Mechanical Property Tensile Strength 535 520 520 520 Yield Strength 245 205 205 205 Extension 30% 30% 35% 35% Hardness (HV)
1 Title : ALUMINIUM WINDOWS AND DOORS 7X5 WEATHER STRIP 2 Materials : 100%PP 3 Payment Terms : 30%deposit by tt,balance by tt against bl copy 4 Certificate : ISO9001:2015 5 Type : silicone/non-silicone; 6 Color : White,black,gray,brown,etc 7 Delivery : Within 10days 8 Trade Terms : EXW,FOB,CNF,CIF 9 Size : Bottom width:4.5-8.9mm,pile height:3-25mm,thick base:0.6-0.8mm 10 Package : 1.silicone weather strip for sliding door packing by paper carton Fuction water-proofing, anti-wind anti-dusty,anti-insect, and anti-noisy. Usage Aluminum window and door, plastic steel window and door, glasse window and door etc and other window and door profiles Weather Strip Brush for window Features: 1.Excellent elasticity,strong stick adhesive backing tap. 2.Excellent weather resistance, ozone resistance,UV-stable,chemical resistance,anti-aging etc 3.Excellent sealing performance,shock,noise,air,water,dust proof etc.
