Inconel 625 A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy's matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.
Inconel 718 A precipitation-hardenable nickel-chromium alloy also containing significant amounts of iron, niobium, and molybdenum along with lesser amounts of aluminum and titanium. It combines corrosion resistance and high strength with outstanding weldability including resistance to post weld cracking. The alloy has excellent creep-rupture strength at temperatures to 700.
Inconel X-750 A nickel-chromium alloy similar to Inconel 600 but made precipitation hardenable by additions of aluminum and titanium. It has good resistance to corrosion and oxidation along with high tensile and creep-rupture properties at temperatures to 1300Ë?C. Its excellent relaxation resistance is useful for high-temperature springs and bolts. Used in gas turbines, rocket engines, nuclear reactors, pressure vessels, tooling, and aircraft structures.
Monel 400 is a single phase, solid-solution nickel-copper alloy that offers superior resistance to many corrosive environments over temperatures ranging from sub-zero to 800°F. This alloy is only hardenable through cold working, rather than heat treatment. The Curie Temperature of this alloy lies in the ambient temperature range and is affected by variations in the alloys chemical composition. Caution is advised in applications where strong nonmagnetic characteristics are desired. The ratio of copper to nickel in Monel 400 is almost identical to that found in the ore the metal is derived from. This alloy was first patented over 100 years ago, and it continues to be one of the most commonly used corrosion resistant alloys commercially produced.
Integral drill rods(integral rods or integral drill steels) are used for small hole drilling. Equipped with small power rock drills, like air leg rock drills, hand held rock drills, etc. integral drill steels can be used for drilling bore hole diameter from 29mm to 41mm usually. Integral drill rods are usually hexagonal with chisel tips or cross tips, the diameter are usually 19mm and 22mm. According to different application, different lengths are available from 600mm to 9600mm usually. With the best hollow drill steels and tungsten carbides, sinodrills integral drill steels will show you very good performance.
Suitable water well DTH Drill Pipes High quality water well drilling machine E75 drill pipe manufactures 89mm High quality stainless steel rods 89mm thread drill steel rod
TP321H Stainless Steel Boiler Pipe Standards: ASTM A213,ASME SA213,EN10216-5 Outside diameter: 33.4mm~273.1mm Wall Thickness: 2.77mm~18.3mm Length: As per requirement Package: Plastic woven bundles; Plywood cases
S32205 Duplex Steel Pipe Standards: ASTM A789, ASTM A790 Outside diameter: 12.70mm~168.00mm Wall thickness: 0.89mm~11.00mm Length: As per requirement Package: In plywood case
TP316 Stainless Steel Industrial Pipe Standards: ASTM A312, ASME SA312, EN10216-5, GB/T14976, DIN17456, DIN17458, JIS G3459 Outside diameter: 10.3mm~323.9mm Wall thickness: 1.24mm~28.6mm Length: As per requirement Package: In plastic woven bundle
Who are we? We are Beijing AlloyO Technology Co., Ltd. (hereinafter referred to as "AlloyO") The Supply Chain Expert of International trading The important Leader & stockist in Special corrosion resistant alloy field The one-stop solution of material selection guidance, import and export supply of high quality alloys What we can do? We can Supply Special corrosion resistant alloy imported and original from Germany, US and Japan in stock as below: Nickel-Based Alloy Seriesï¼?Niâ?¥32%ï¼? Alloy20 / Incoloy20 / UNS N08020 / 2.4660 / ASTM B463 / ASME SB463 Alloy 800 / UNS N08800 / 1.4876 / X10NiCrAlTi32-21 / NiCroFer3220 / ASTM B409 / ASME SB409 / Incoloy800 Alloy800H / UNS N08810 / 1.4876 / X10NiCrAlTi32-21 / NiCroFer3220H / ASTM B409 / ASME SB409 / Incoloy800H Alloy 825 / UNS N08825 / 2.4858 / NiCr21Mo / NiCroFer4221 / ASTM B424 / ASME SB424 / Incoloy825 Alloy C22 / UNS N06022 / 2.4602 / NiCroFer5721hMoW / ASTM B575 / ASME SB575 / Hastelloy C-22 Alloy C276 / UNS N10276 / 2.4819 / NiMo16Cr15W / NiCroFer5716hMoW / ASTM B575 / ASME SB575 / Hastelloy C-276 Alloy 625 / UNS N06625 / 2.4856 / NiCr22Mo9Nb / NiCroFer6020hMo / ASTM B443 / ASME SB443 / Inconel 625 Alloy 400 /Monel400 / UNS N04400 / 2.4360 / NICORROS / NiCroFer6025hT / ASTM B127 / ASME SB127 Alloy 600 / UNS N06600 / 2.4816 / NiCr15Fe / NiCroFer7216 / ASTM B168 / ASME SB168 / Alloy600 C.P. Ni200 / Ni201 / UNS N02200 / UNS N02201 / 2.4061 / Nickel LC 99.2 / ASTM B162 / ASME SB162
Size (inch): 3/4, 1, >3, 3, 1/2, 3/4, 1, 2, 3, >3, 2, 1/2 Size: 1/2 inch, 1 inch, 2 inch, 3 inch, 3/4 inch Unit Length (meters): 12, 6, 3 , 18 Surface Finish: Finished Polished, Brushed, Sand Blasted, Anodized
Specifications : ASTM A182 ASME SA 182 Tube Size : 1/16OD to 2OD, 2mm OD to 50mm OD Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc. Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
Part Number K406-12 Number of Items 1 Connector Type Tee Global Trade Identification Number 10671404094550 Item Weight 1.0 pounds Length 2-21/32 inches Model Number K406-12 Size 3/4" Class 150, 3/4" NPT Female
Specifications : ASTM A182 & ASME SA182 Size : 1/8 NB to 4 NB (Socketweld & Screwed-Threaded) Standards : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS Type : Threaded Fittings
Stainless Steel 304/304L Pipe Fitting, Concentric Reducer Coupling, Butt-Weld, Schedule 10, 1" X 1/2" Pipe Size
Stainless Steel 304/304L Pipe Fitting, Concentric Reducer Coupling, Butt-Weld, Schedule 10, 1" X 1/2" Pipe Size
Size 0-1 inch,1-5 inch,5-10 inch,10-20 inch,20-30 inch,>30 inch Usage/Application Paper & Pulp Companies,High Pressure Applications,Oil and Gas Industry,Chemical Refinery,Pipeline Material Stainless Steel Material Standard ASTM A105,ASTM A182,ASTM A351,ANSI B16.5 Brand Nascent Type Flange
1.Commodity Name CARBON STEEL SEAMLESS PIPE 2.Standard ASTM A106 ,ASTM A53 , ASTM A179 ,ASTM A192,GB 3087, GB/T 8162 ,GB/T8163 10# 20#, , 3.Outer Diameter 2-36 mm 4.Wall Thickness 21.3-810 mm 5.Length 5.8m,6m,11.8m or as per customer's requirements
Offer Welded and Seamless pipes 1/2" NB to 24" NB in Stainless steel grades
offer Flanges in DIN, ASTM , BS STDs. Forged, Plate etc. Pipe fittings -welded , Screwed , Threaded , etc.as per ASTM std. , DIN std. STD
