Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
(1) Ferrosilicon is an indispensable deoxidizer in the steelmaking industry. In steelmaking, ferrosilicon is used for precipitation deoxidation and diffusion deoxidation. (2) Used as an inoculant and spheroidizing agent in the cast iron industry. In the production of nodular cast iron, 75 ferrosilicon is an important inoculant (helping to precipitate graphite) and nodulizer. (3) Used as a reducing agent in the production of ferroalloys. Not only the chemical affinity between silicon and oxygen is great, but the carbon content of high-silicon ferrosilicon is very low. Therefore, high-silicon ferrosilicon (or silicon alloy) is a commonly used reducing agent in the production of low-carbon iron alloys in the ferroalloy industry. Ferrosilicon particle size: 0-1mm, 1-3mm, 3-10mm, 10-50mm, 50-100mm or customized. Packing: Packed in ton bag, 1000kg/bag
High carbon silicon is a new type of alloy used in converters, and can also be called silicon-carbon alloy. It can replace ferrosilicon, silicon carbide, recarburizer, reduce the amount of deoxidizer, used in converter smelting deoxidation alloying process, the effect is stable, steel chemical composition, mechanical properties and internal control quality are better than traditional processes.
Silicon metal 441 Si:98.7%min. Fe:0.5%max. Al:0.5%max. Ca:0.3%max. Size:10-100mm,or customize In plastic woven bags of 1 mt each.
Silicon metal 441 Si:99.0%min. Fe:0.4%max. Al:0.4%max. Ca:0.1%max. Size:10-100mm,90%min or customize In plastic woven bags of 1 mt each.
100:2 two-component liquid silicone rubber belongs to condensation type mold silicone rubber. When part A and B are mixed in 100:2 weight, the crosslinking reaction can occur, and the elastic body with certain hardness is formed after curing. It has many advantages, such as good fluidity, easy to operate with low viscosity. After curing, it has heat resistance, high temperature resistance, corrosion resistance, solvent resistance, high tensile and tear strength, low linear shrinkage, high turning model times. It is a cast of gypsum, cement, POLY-RESIN, PU, AB water, ABS material of the elastic mold material, it is widely used in the production and reproduction of sludge, toys, gifts, reliefs, statues, city sculpture, cement products, hand plate, car model, model of home appliances, mold products such as soap.
--Silicone Monomer D4 Silicone Linear Body DMC Methyl Silicone Oil(0.65-1Kcs) Dow/Wacker/ShinEtsu/Chinese Methyl Silicone Oil(5K-50Kcs) Elkem High Hydrogen Containing Silicone Oil(20-30cs): Momentive/ShinEtsu/Dow ect. 107 Glue Hydroxy Silicone Oil --Amino Silicone Oil Amino Silicone Oil: Elkem C845, C910, C803 T900, T1501, T3030, T2502 Low Cyclic Amino Silicone Oil: Elkem L5040L, L1090L, L0340L --Silicone Emulsion Hydroxy Silicone Oil Emulsion: Elkem E8455 Methyl Silicone Oil Emulsion: Elkem E360, E872, E8060 Amino Silicone Oil: Elkem MEM-8031 Special Emulsion: Elkem E8786, E8840, E8680 Silicon Wax: Dow MEN-1728
Features Thermal conductivity 3.0W/(m.K), flammability UL 94-V0 Excellent electrical insulation, bonding strength13 Mpa Application temperature: -45~123, Short term: 225 Fast cure with additional heat Applications EV Battery pack; Aerospace equipments; Semiconductor, LED TV; Between any heat source and a heat sink; XK-D30L is a two-part thermally conductive adhesive, combining features of thermally conductive, electrical insulation,semi-rigid bonding and sealing. It is ease of use, long service life, suitable for automated dispensing system to improve productivity and bonding effect. XK-D25 is designed for strong bonding of metals or plastics. Better effects can be achieved when it is used together with GLPOLY bonding adjuvants. Description GLPOLY Thermally Conductive Structural Adhesives Are Designed For CTP Battery Cell Bond. Ive sorted out the materials of new energy EV CTP battery pack and found that the items concerned most by engineers were thermally conductivity, tensile strength, shear bonding strength, hardness, elongation and shelf life etc,  in addition, the fluency of dispense and fluidity of material were concerned too. The design requirements of each customer are dissimilar, but it does not matter, GLPOLY is confident of providing customized service for customers. 1. Has no equals in features of bonding strength, roughness, thermally conductive and electrical insulation; 2. Bonding strength is 30% higher than that of competitive products, withstanding impact of 12m freefall superimposing speed of 120km/h ; 3. Eliminates the need of mechanical fasten, increasing volume by 20%, reducing components by 40%, improving productivity by 50%, competitive products cant achieve these objectives; 4. Withstands 2500V at 0.28mm thick; dielectric strength is up to 14kV/mm, 40% higher than competitive products; 5. Performance degradation is less than 5% at 85 Celsius degree, RH85 for 1000 hours, and performance of PU deceases by 40% for 500 hours; 6. 25-year service life, three times longer that that competitive products; 7. Flammability UL94 V-0, when it leaves fire, it goes out; some competitive products would be burned out; 8. Cures for 13 hours at room temperature, two times faster than that of competitive products; 9. Application temperature: -45~175, short term: 250, 15% higher than that of competitive products; GLPOLY thermally conductive structural adhesive is designed for CTP battery cell bond, providing 8MPa bonding strength, and compatible with automated dispense processes.
INTRODUCTION: The series is and tear strength, 2-part liquid silicone rubber suitable for injection molding processes. FEATURES: 1. High tensile strength 2. Good rebound property 3. Outstanding resistance to ageing 4. Low shrinkage 5. Low yellowing 6. Excellent thermal and cold stability PACKAGING: It is available in 20kg pails of 200kg drums TYPICAL PROPERTY: Appearance: Transparent; Viscosity (mpas): 650,000~950,000; Hardness: 20~70 Shore A; Tensile Strength: 6.5~8.5 MPa; Tear Strength: 20~35 KN/m; Elongation at break: 330%~800%; Linear shrinkage: 0.1% REMARK: The product should be closed tightly, protected from light and moisture, the shelf life is 12 months. These figures are for reference only, please contact us for detail. ABOUT US: We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber. What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
KESARIA manufactures premium quality Silicone Bush For Taps to prevent leakage of water in Water Purifier Taps. These Silicone Bush are transparent, flexible, Odorless, withstand extreme temperature range, UV, Ozone, harsh chemicals, acids & alkalis, highly durable & avoid bacterial growth. Our Silicone Bush for taps are available in numerous colors & sizes, are easy to install & are broadly used in Water Purifiers.
Silicone Hoses
Brief information -- A quaternary modified softening agent with terpolymer structure and excellent hydrophilicity. -- HTcone 3206 E is very stable in acid and mild alkali condition at normal temperature while it also has excellent stability at 100degree below pH 8,which is suitable for dyeing machine and setting machine . -- Confers soft, silky and bulky hand feels to fabrics, as well as hydrophilicity while absorbency is 2 â?? 3 seconds. General properties -- Appearance: pale transparent liquid -- pH: 5 â?? 8 (1% solution at 20 degree) -- Ionicity: nonionic -- Solubility: easily soluble in water --Solid content : 53% Properties and fields of application -- Resistant to high temperature, mild alkali at normal temperature, strong electrolytes and shearing stable wihout silicone spots. -- Natural soft, smooth and non-greasy hand feels. -- Excellent hydrophilicity that exactly solves the conflict of hand feels, hydrophilicity and washing resistance. -- Suitable for various process and euqipments with high flexibility. -- Suitable for various fibres, such cotton, T/C, CVC, etc, especially best performance to cotton. -- Excellent hydrophilicity that allows direct shade repair and avoids re-pollution during the rapair. -- Better cost performance compared with softener flakes at same price, which achives performance combined softener flakes and hydrophilic silicone softeners. Application -- High concentration product and can be diluted 5-10 times. -- Padding: HT-3206E: 20 â?? 50 g/L Cure at 100degree and set at 150 â?? 180degree for 50 seconds -- Dipping: Ht-3206E: 2 â?? 5% (O.W.F) Temperature & time: 25 â?? 50degree �? 20 â?? 30 min -- Specific process should be adjusted by testing. Packing and storage -- Packing: 125 kg/polyethylene drum -- Storage: 6 months in sealed container at room temperature
Si: 70-75% Al: 1.25% max P: 0.5%max S: 0.05%max C: 0.2% max Packing: 40 Kgs Bag
C: 1% max Ca: 30-32% Si: 55-60% Al: 1 % & 1.5 % Max S: 0 . 04% Max P: 0 . 04% Max
Ferrosilicon is often used as deoxidizer in steel making, and it is also beneficial to improve the temperature of molten steel when it is produced with a large amount of heat during the generation of SiO2. Silicon widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel, silicon in the ferroalloy production and chemical industry, commonly used as a reducing agent
Silicone Sticky Roller Material: Silicone Anti-fatigue Test: 30000 times Tensile strength: 900-1400pai Elongation: 150-900% Rebound Force: 30-75% Shrinkage Factor: 2.0-4.0% Compression Set: 10-50% (22hrs/177c) Tackiness: no tackiness, low, medium, high, super high Color: Blue Size: 5mm/1"/2"/3"/4"/6"/8"/10"/12",customiszed size available for us Handle Type: Aluminum alloy, Black Plastic, ABS Handle Package: 1pc/bag,10pcs/box Application: Cleanroom, SMT, Electronics, Semi-conductors, PCB,LCD ,LED, Breadboard, Computer, Stainless Steel Sheet, Film for dusting, Glass Surface, Food & Medical & Optoelectronic Industry, Lab, Printing Circuit Board, Liquid Crystal Display etc
ZONTOM SQUEZEE 700 is a collapsible water bottle made from 100% food grade silicone rubber. Bottle comes with a FREE wristband. This bottle is high heat resistant and microwave safe. It can be folded in a small size and can be stored under a small bag or purse. Highlights of ZONTOM SQUEZEE 700 Antimicrobial High Heat Resistant Collapsible Odor Free Can Sterilize Daily in Boiling Water Easy to wash Microwave Safe
Elastosil Aux Primer G3243
Remelted Ferro Nickel ingot from NiMH battery. By product information which content around 4% of cobalt, 7-10% of earth rare metal ( lanthanum, cerium, neodymium, praseodymium). We sell base on analysis of the final product with big discount. Ingot size and shape follow buyer request.
Our organization holds expertise in fabricating superior quality Corona Treater Silicone Sleeve widely applicable for many industrial purposes. Features: Good electrically insulation Ozone corona discharge resistance. Suitable for continuous operation at 180 degree C and can be operated at high temperature without loss of any mechanical and discharge property. Having high discharge strength 250-500 V/mm Resilient and flexible for case of insulation on to treatment roll Long life Due to sleeve treat can be operated with much smaller air gap. Require much lower web tension Do not break or crack under unusual web tension Size available from 2" ID to 8" ID and wall thickness 2mm to 5 mm (+/-0.2 mm) Normally available from stock in opaque color Special size and color available on request We can provide continuous length of 10 m in any of above size Standard Size: 48 mm ID x 54 mm OD 59 mm ID x 65 mm OD 70 mm ID x 76 mm OD 72 mm ID x 78 mm OD 74 mm ID x 80 mm OD 95 mm ID x 101 mm OD 98 mm ID x 104 mm OD 145 mm ID x 151 mm OD
