Profile A certain amount of water as defined by meter body passing through makes piston move. The measuring structure records its movements. Movements times defined amount making total amount of water passed registered. Features 1. Rotary piston structure. It registers total amount of water passed in the tube by calculating how many times the piston rotates. 2. Dry and wet type are both separated from water so as to keep the registering clear. 3. Registering is stable and high-graded measurement. Easy to install. 4. Long endurance with no rotating inclination and long work life. 5. Various types available to register pure water or to be installed in any position. 6. Remote transmission device can be added upon request. 7. Different structures and specifications with beautiful appearances are available. 8. Meter bodies can be of copper, SS or plastic. 9. All technical figures are conformed with GB/T778.1~3-1996 which is equivalent to IS04064 Standard Class C. Working condition L Water temperature≤ 45º C L Water pressure≤ 1Mpa (≤ 0.6Mpa for LXH-8S). Maximum permissible error L From the minimum flow-rate (qmin ) inclusive to the lower zone of the transitional flow-rate (qt ) exclusive: ± 5%.
The water enters the meter from the inlet of the meter body and impacts the vane wheel at the tip of the vane blades to make it rotate. The water flows out from the outlet of the body. The rotation of the vane wheel (proportional to the velocity of water flow) is transmitted directly to the central gear in the vacuum-sealed register by the magnetic coupling. The sealed register totalizes and indicates the water volume passing through the meter. Working condition -Water temperature≤ 50º C (Hot water meter≤ 90º C) -Water pressure≤ 1MPa (PN: 1.6MPa/16bar) -Δ P≤ 0.1MPa Accuracy -From minimum flow-rate (qmin) inclusive, to transitional flow-rate (qt), exclusive: ± 5% -From transitional flow-rate (qt) inclusive, to overload flow-rate (QS), exclusive: ± 2% (Hot water meter: ± 3%. Features 1. Wet, dry, liquid sealed 2. For hot or cold water 3. Small, light 4. Brass body or plastic body, optional 5. Brass body can be painted or nickel coated 6. High accuracy 7. The meters conform to ISO4064 Standard Class B or Class C.
Use ultrasonic flow measurement technology, no mechanical moving parts drift diameter design, no pressure loss, cut down the electric consumption of the pump and help untilities reduce cost. Features: Low in initial flowrate, and the min. Flow velocity measured is0.002 m/s; Measurement cycle 1 time per second, battery powered (One battery can work continuously for 6 years); Multi-channel construction design, double cross section measurement, and be able to ensure the measurement accuracy to the largest extent; Be able to work at any flow point for long time; IP68 of the whole meter, for each unit of the meter is IP68 designed; Micro-consumption design, less than 0.0008W; Drift diameter design, no pressure loss. Operating on velocity-difference principle, the LG-UWM68 series is specially designed for urban water supply and building-use. The conventional water meters suffer from the drawbacks that they are only operable at a higher flowrate and are insensitive to a small flowrate. However, the LG-UWM68 series water meter can help tackle the bottleneck. And the meter is highly adaptable to diversified industrial conditions Due to the use of ultrasonic flow measurement technology, it has no mechanical moving parts drift diameter design, no pressure loss, cut down the electric consumption of the pump and help the enterprises reduce cost Be able to work at any flow point for a long time and high in reliability, immune to magnetic interference Battery-powered capable of operating continuously for a period of over 6 years with a single cell High sensitive to minimal flowrate and high in measuring accuracy Capable of performing various output function, and it is capable of making wireless transmission of meter reading to form a monitoring system via the GSM network to monitoring the meter's running status and the pipe network conditions. Three design versions are available, i. e. The ordinary version, 2-way version and fire water version are cater to different needs of users Ordinary version: Measurements of the flowrate and cumulative running time in positive direction 2-way version: Capable of measuring flowrate, cumulative flowrate cumulative running time in positive/reverse direction; Fire water version: Much bigger range ratio, and specially designed for fire water. CE: 2004/108/EC The meter is in conformity with Standard on Measurement of Water Flow in Fully Charged Closed Conduits_Meters for Cold Potable Water and Hot Water GB/T 778-2007-a standard is issued by the People's Republic of China L Ex-factory calibration of the meter is made in conformity with Standard on Water Meter for Potable Cold Meter JJG162-2009- a standard is issued by the People's Republic of China.
Name£ºlxsz series wireless remote valve-control dry water meter Model£ºlxsz Output power: 50mw Receiver sensitivity :-108db Transmission distance: >200m Dimension: 165*85*111mm Clicks:450.
LXSZ series meter uses advanced wireless transmission technology. Through microelectronic control circuits, it converts the pulse signals of traditional mechanical meter into electrical signals.Then the metering data is transmitted to background platform through GPRS network automatically , or it can be collected by a hand-held wireless unit from outside LXSZ Series wireless remote smart intelligent valve-control wet water meter is high-tech mechatronics product.of the houses and after that downloaded to a computer through USB port. 165*85*111, 7.7kg.
LXSZ series meter uses advanced wireless transmission technology. Through microelectronic control circuits, it converts the pulse signals of traditional mechanical meter into electrical signals.Then the metering data is transmitted to background platform through GPRS network automatically , or it can be collected by a hand-held wireless unit from outside LXSZ Series wireless remote smart intelligent valve-control wet water meter is high-tech mechatronics product.of the houses and after that downloaded to a computer through USB port. 165*85*111
Introduction: Equipped with our companyí»s code controller, base meters are bought abroad to realize the prepaid and control functions, thus to achieve the automatic control of different functions of this new type of gas meter. Range of application: This product can be applied to the measurement of gas, natural gas, liquefied petroleum gas and other non-corrosive gases in the city. Main features: Automatic prepaid function: charging before using of it, water meter residual capacity= the original gas + newly purchased gas Auto-control function: switching the gas path automatically according to the payments and gas situation. Real time computation function: measuring on the real time and display the stock value, closing gas source automatically when the purchased gas is used up. Power-down memory function: solid state recorder is internally installed and the data will be permanently preserved. Status display function: displaying the amount of newly charged gas, the remaining stock and cumulative use, as well as low-voltage state etc. Prompting function: warning when the remaining gas is used to the set value or other functions are out of work. Overdrawing function: able to set a certain overdraft gas according to the user needs Automatic alarm function: when the voltage is lower than certain point, alarm system will be operated and the battery must be replaced within 72 hours, otherwise, it will automatically shut down the gas resources. Anti-gas-larceny function: shut down the gas supply automatically when there are theft of gas or illegal operations Technical parameter: 1ú¬base meter operation criteriaú¦gb/t6869 q/ofd.001-2007 jjg577-2005 2) current working voltageú¦3.00v 3ú¬cuiescent currentú¦=8 years 5ú¬life span of valveú¦switching frequency more than 5000 times 6ú¬accuracy degreeú¦level b 7ú¬four anti-functionú¦anti-attack, waterproof, anti-smoke, anti-knocking
Introduction The series of products are encoded and decoded by a computer algorithm based on encryption and decryption rules. The user inputs the 8-bit code that produced by the management system to realize the purchases recharge. On account of using a plain language input with no carrier, the user can go to the places designated by operating companies to buy code directly or get the code by phone. With 8-bit password, the users can recharge by themselves without considering time and space constraints, and it is simple and convenient to use. Operating units can manage hundreds of thousands of users with little manpower and equipment, and complete manage service fees and charges without leaving home, which puts an end to the phenomenon of the arrears. Range of application To measure the cold water that flows through water pipe and control of water fees. Main features: Multi-current Power-off memory function Sensitive/dependable function Dynamic display function The measurement accuracy reaches b degree of iso 4060b Prompting function General purpose Overdraw function Prepaid function Auto alarm function Auto control function Anti-water-larceny function Technical parameter: Gb/t778_1996 base meter operation criteria Current working volts: 3.00v li-ion Measuring precisionín0.01 m³ Pressure lossín0.1mpa pressure loss Max working pressure1.6mpa Quiescent currentín12ua Data holdí²8 years Temperature0íµí40íµ
We have many different principles from germany to holland for our customers need in measuring water flow, water level, wastewater/sewage, water sampling instruments and scada units for data transmission.
Wavelength Range: 190-1100nm Spectral Bandwidth: 2nm(5nm,1nm optional) Wavelength Accuracy: í+0.5nm Wavelength Reproducibility: 0.2nm Photometric Accuracy: í+0.5%T(0-100%T), í+0.002A(0-0.5A), í+0.004A(0.5A-1A) Photometric Reproducibility: 0.2%T Working Mode: T, A(-0.33A), C, E Stray Light: í_0.1%T(NaI,220nm;NaNO2, 340nm) Baseline Flatness: í+0.002A Stability: í_0.002A/h( At 500nm, After warming up) Noise: í+0.001A(at 500nm, After warming up) Detector: Silicon photo-diode Display: 6 inches high light blue LCD Power: AC:220V/50Hz,110V/60Hz,140W Dimensions: 530í-410í-210mm Weight: 18kg.
Water meter Our products according to iso4064 class b or c 1pc in a carton or wooden box
1. accuracy :1% repeatability 0.5% cycle:500ms 2. OCT output 3. data interface :RS-232 4. DN: 15mmí¬6000mm 5. medium: temparature: 0-1600C 6.Turbidity: í_10000 ppm flow rate: 0~í+30m/s 7.power:AC220V ,DC8-36V ,AC7-30V Solid structure with die-cast aluminium enclosure Weight : 2.5Kg
òNumerous Variants A room for customization at a reasonable cost is the description that sums up the KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES. The MODEL 3660 SERIES has gained wide acceptance and solid reputation for its flexibility. It is in use throughout laboratories, universities and foundries, in both its original and customized variants. ò Low-Cost If the cost effectiveness is the decisive factor in choosing the right mass flow controller for you application, few can compete with the KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES. Its extensive menu of standardized optional features is yet another advantage in cost considerations. ò KOFLOC Dependability KOFLOC has 60 years of experience in manufacturing precision flow instruments. KOFLOC products, both standard and off-catalog custom items are well received throughout Japan as the name that manifests confidence. KOFLOC, the fluid expert, is the name professionals trust in precision control of minute flow. ò Low Pressure Option The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES has a standard low-pressure differential option especially suited for applications of burn control. ò Solenoid Valve The KOFLOC Standard Mass Flow Controller MODEL 3660 SERIES utilizes the unidirectional normally closed valve with solenoid actuator to achieve higher dependability and safety. ò Standardized Dimensions and Parts The KOFLOC Mass Flow Controller, MODEL 3660 SERIES retains the standard 3 in (76 mm) footprint, regular fittings and SEMI standard serial connector to easily replace and fit into existing gas lines without any modifications for use in widest possible applications. òQuick Response The KOFLOC Mass Flow Controller, MODEL 3660 SERIES is equipped with the new improved constant current thermal differential sensor for quick response of 0 ~ 100% in 2 s or less. ò Versatility The KOFLOC Mass Flow Controller, MODEL 3660 SERIES is in use as a component for Sputter deposition, bond wiring, welding and washing equipment for semiconductor and electronic industries. It is used in scientific and analytic purpose such as in thermal analysis and vacuum equipment. The MODEL 3660 is also capable of meeting unique needs as the mass flow controller in industrial applications, including gas mixing, air sampling, burn control and more.
Water level indicator Dial size mechanical water level indicator Range of dial size in diameter: 300mm, 400mm, 600mm & 9oomm Body: mild steel body (finish with polyester coating) Pulley: aluminium Gear / worn: brass to delrin Float: stainless steel ss304 Counter weight: stainless steel ss304 Cord (54ft): stainless steel ss304 Back cover: long Dial marking: standard 15kg -25kg per crate
The KF Series of Field Mounted Indicating Controllers, which the special manufacturing techniques is introduced from Japanese Yamatak-Honeywell Co., Ltd, provides both application flexibility and instrumentation savings by employing a common type of indicating control section in each instrument. All process variables, such as temperature, pressure, level and flow, can be measured and controlled by the same type of instrument. The difference is only in the detector. Thus, the KF Series provides model simplicity and uniformity, and requires very little in the way of maintenance. The KF Series comprises not only Indicating Transmitters but also Indicating Transmitting Controllers. They are united in structure, and combined in functions, complete in varieties and specifications with stable performance, high precision, strong anti-interference ability, high reliability, and are easy to mount and maintain. They are intrinsically safe and explosion-proof, able to drive the pneumatic performance mechanism directly, so they have been generally well accepted and trusted by domestic and foreign customers.
Model KFT Temperature Indicating Controllers indicate and control a process variable by converting its temperature change into mechanical displacement of a bellows through change in expansion of liquid-fill by temperature or change in gas-fill pres-sure by temperature. Indicating transmitters and indicating transmitting controllers also are available as well as indicating controllers. The controllers are available either in the local type to set the set-point value with the knob on the instrument or in the cascade type(remote type) to set the set-point value with a pneumatic set-point signal. **A wide variety of measuring elements and control mechanisms are available to meet various applications. **A pneumatic circuit board and a heat-resistant weatherproof sturdy case are used , thereby greatly improving the durability and reliability. **The pneumatic circuit board system allows to readily add or eliminate control mechanisms and units, thereby enhancing the system modification and expansion flexibility. **Interchangeable parts are used to the maximum practicable extent, thereby reducing the number of parts to be kept in stock. **A bellows type pressure receiving element, which provides a larger torque and a higher resistance against vibration, is employed. **A Compensation mechanisms for ambient temperature change is incorporated.
Model KFP Pressure indicating Controllers indicate and control a process variable by converting its pressure change into mechanical displacement of a bellows or a spiral pressure receiving element. Indicating transmitters and indicating transmitting controllers also are available as well as indicating controllers. The controllers are available either in the local type to set the set-point value with the knob on the instrument or in the cascade type (remote type) to set the set-point value with a pneumatic signal. **A wide variety of measuring elements and control mechanisms are available to meet various applications. **A pneumatic circuit board and a heat-resistant weatherproof sturdy hard case are used, thereby greatly improving the durability and reliability. **The pneumatic circuit board system allows to readily add or eliminate control mechanisms and units, thereby enhancing the system modification and expansion flexibility. **Interchangeable parts are used to the maximum practicable extent, thereby reducing the number of parts to be kept in stock. **A balancing weight and a pulsation damping spiral (optional) are employed, thereby making the instruments highly resistant against mechanical vibration and process pulsation.
Model KFK Pressure indicating Controllers (adjustable range type) indicate and control a process variable by converting its pressure into mechanical displacement of a bellows or a spiral pressure receiving element. Indicating transmitters and indicating transmitting controllers also are available as well as indicating controllers. The controllers are available either in the local type to set the set-point value with the knob on the instrument or in the cascade type (remote type) to set the set-point value with a pneumatic signal. **A wide variety of measuring elements and control mechanisms are available to meet various applications. **A pneumatic circuit board and a heat-resistant weatherproof sturdy hard case are used, thereby greatly improving the durability and reliability. **The pneumatic circuit board system allows to readily add or eliminate control mechanisms and units, thereby enhancing the system modification and expansion flexibility. **Interchangeable parts are used to the maximum practicable extent, thereby reducing the number of parts to be kept in stock. **The detecting section is identical with that of the pressure transmitter of PREX3000 Pneumatic Transmitter Series.
WF30-12 Cone-shaped Flow meter Pipe type Specification: Cone-shaped flow meter is a new-style high precision flow sensor who can measure all kinds of media. The cone piece throttle hanging over the pipeline center can baffle the fluid, which forms into differential pressure at the up and downriver of the cone. The p corresponds with the media flux, and there are two pressure ports located at the forth and after of the flow sensor respectively positive pressure port and negative pressure port. 1. Apply to: air, liquid & steam in pipe. 2. Pipe diameter: 15mm~2000mm or more. 3. Pressure grade: pn0.25-42.0 4. Accuracy: +0.5% of measure value 5. Turndown: more than 10:1 6. Repeatability: +0.1% 7. Standard betas: 0.450-0.850 8. Pressure loss: % of differential pressure, varies with beta ratio. 9. Installation: 0-3d upstream, 0-1d downstream.
Power: dc 3.6v +0.6v or - 0.6v Pressure resistance: 1.6 mpa, 15min Pressure loss:
