Fiber atenuador fibra optica are used for reducing the power of the light in the fber optic network. We supply many types fiber optic attenuators, fixed value fiber optic attenuator refer to the attenuator that reduce the power of fiber light at a fixed value loss, for example, 2dB. Wile adustable fiber optic attenuator can generate adjustable loss to the fiber optic link. Sophenol offers male to female type fixed attenuators which are available in different connector types, such as LC, SC, FC, ST, E2000 and in different attenuation level from 1dB to 30dB. All our attenuators are manufactured according to industry standards and are 100% fully tested. Features: ·Simple and reliable structure ·Good reliability and stability ·High Return Loss ·Fixed, Variable and In-line type Applications: ·CATV&LAN ·Telecommunication Network ·FTTH ·Passive Optical Network ·Test Equipment ·Parameter: ·Attenuation Tolerance(dB) 1-10dB
Specifications: Housing: high temperature thermoplastic Shell: phosphor bronze protects against EMI/PFI interference Contact: phosphor bronze ,phosphor bronze with 3 to 50u” gold plate Available in CAT.5E or CAT.6 T568A/T568B wiring, meeting every cabling international requirement Accept 22-26 AWG solid with a insulation diameter of 0.4-0.6mm Insertion life :MIN 750 matching recycles Contact resistance: no more than 2.5mO under normal atmospheric pressure Electrical: Voltage rating: 125V AC rms Current rating: 1.5Amp Contact resistance: 100m Ohms (maximum) Insulation resistance: 1,000M Ohms (minimum) at 500V DC Dielectric strength: 750V AC rms, 60Hz and one minute Environment: Storage temperature: -40 to +85°C Operating temperature: 0 to 70°C Mechanical: Housing material: PC UL94V-0 Inner material: flame-retardant ABS UL94V-0 PCB material: FR-4 Thickness: 1.6mm Contact material: phosphor bronze stamp and PIN T=0.35mm IDC contact material: phosphor bronze, T=0.50mm with nickel plating Wire: 24 to 26AWG
The MPO/MTP is a multi-fiber patch cord suitable for high-density back plane and Printed Circuit Board (PCB) solutions in data and telecom systems . Used in transmitters and receivers , this connector offer up to 12 times the density of standard connectors , providing significant space and cost savings . Precision molded MT ferrules , together with metal guide pins and precise housing dimensions ensure fiber alignment when mating. Mass termination is combinations of 4 , 8 or 12 fiber ribbon cables are available . Single-mode versions are offered with premium low-loss or standard and multimode versions are also available. Cable types include bare fiber ribbon and ruggedized ribbon (PVC Jacketed) . Push-pull latching mechanism with audible click ensures proper connection . Applications : • Telecommunication • CATV • LAN&WAN • Broadband • FTTX Features: • Push-On/Pull-Off latching connector • Either 4 , 8 , 12 & 24 fibers available • Bare fiber ribbon type , ruggedized type and fan-out cord available • Precision guide oin assures fiber alignment at mating • Meet IEC61754 , TIAFOCIS 5/604-5 , bellcore GR-143 requirements • High density and economical solution for mass termination fiber Advantages : • No on-site assembly necessary • Simple reconfiguration • High Packing fraction • Various Configurations
Fiber Optics PLC Splitters provide a cost effective and space saving product suitable to the ever changing networking requirements. With it's compact size,these splitters can be utilized in in-ground and aerial pedestals as well as rack mount systems. Installation is simple using a variety of connector types or fusion splicing. Sophenol supply Planar Lightwave Circuits which are key components used in FTTx networks. We supply the PLC splitters including 1XN to 64 and 2XN to 32 types, they are with a wide range of working wavelength from 1260nm to 1620nm. The PLC splitter can be with optional various kinds of connectors and cable length, they feature compact size and very good optical performance. Features: •Value-added Modules for FTTx •0.9/2.0/3.0mm Input and Output •Fan-out Type Available •Compact package Convenient for Small Application & High Density Areas •Telcordia GR-1209 & GR-1221-CORE Compliant •Jacketing Material Rated to -40 to +85 degree Celsius Operating Temperature •Bend Insensitive G657A fiber •Low Insertion Loss and PDL •High Polarization Extinction Ratio & Excellent Uniformity •Offer Unique Designs and Configurations & Support Industry Standard Applications Applications: •FTTx Deployments (GPON/BPON/EPON) •CCTV/CATV Links •Access/Metro Networks •Long Haul Telecommunications
RF Feeder Clamp - Product information: The Hanger is mainly used for the fixation between RF cable and tower, cable ladder etc, which is mainly composed of stainless steel and anti-ultraviolet polypropylene or ABS engineering plastics and anti-old rubber, and can be used in different range of temperatures. We manufacture various hangers to meet different requirements of our clients. Product feature: 1. The feeder clamp designed according to the 2. YD/T109 standard. 3. It is suitable for the 1/4 and 2-1/4 cable. 4. Type: through type, along the wall type, anchorear type, hook type; hose clamp type, leakage cable type. 5. Made of stainless anti-acid steels with high quality for microwave and mobile systems Anti-corrosion (transnatures polypropylene and non-rusting) under various weather conditions Stainless Steel Feeder Clamp (Through Type) Size: Optical fiber cable, 1/2", 7/8", 1-1/4", 1-5/8" x1 Single-hole type feeder clamp; Optical fiber cable, 1/2", 7/8", 1-1/4", 1-5/8" x2 Single-hole type feeder clamp; Optical fiber cable, 1/2", 7/8", 1-1/4", 1-5/8" x3 Single-hole type feeder clamp; ...... Optical fiber cable, 1/2", 7/8", 1-1/4", 1-5/8" x1 Two-hole type feeder clamp; Optical fiber cable, 1/2", 7/8", 1-1/4", 1-5/8" x2 Two-hole type feeder clamp; Optical fiber cable, 1/2", 7/8", 1-1/4", 1-5/8" x3 Two-hole type feeder clamp; ...... Feeder Cable Clamp --- Data Sheet Item Name: Specification Model: SY-X-X Application Size 5~8mm Optical Fiber Cable + 9~13mm Coaxial Cable Clamp Stack: Single-hole type (1 ways) Two-hole type (2 ways) Plastic Material: Polypropylene (PP) Material of Clamp Inner: Soft Rubber Metal Material: 304 Stainless Steel Material of ¡¡ãU¡¡À clamp & Thread Rod 304SS M8 Thread Rod Match Cable: 1/4¡¡¥¡¡¥, 1/2", 7/8", 1-1/4", 1-5/8" Feeder clamp Match Cable: RG8, RG213, LMR400 etc. Coaxial Cable Quality warranty: Anti-rust and heat cold resistant for Indoor/Outdoor Use. Working temperature: -50¡ãC- +70¡ãC Packing Poly bag/set, carton, Payment term T/T, L/C, Western union Application scope: Mobile communication base station (GSM, CDMA, GPRS, etc). Feeder clamps for coaxial RF cable are used with following products: a, Telecom cable; b, Fiber cable; c, Coaxial cable; d, Feeder cable; e, Hybrid cable; f, Corrugated cable; g, Smooth cable; h, Braid cable. Carton box
Telecom Pedestal Enclosure Telecom pedestal enclosures provide superior environmental protection for fiber nodes in fiber, copper and FTTx networks. From fiber-optic flex points that connect services throughout a community, to pedestals that deliver services to individual homes, to dedicated pedestals for cellular sites and multi-tenant applications. Features - Provides mechanical and environmental protection of splice and cable storage areas. - Constructed of non-metallic LLDPE to resist rust, corrosion, and impact. Internal equipment is protected from floods, fires, and wind-blown dust and debris. - Easy to put the terminal box inside. - Easy to install on the ground. Application - Widely used in FTTX Network. - Telecommunication Networks. - Data communications Networks and Local Area Networks.
Fiber Optic Cassette Fibre optic cassettes provide a compact solution for seamless wiring and splicing. Equally important, the design allows the box to extend forward from the chassis. This feature allows easy access to adapters and connectors.Cassettes are available in a variety of fiber types, connector types, and fiber counts. Applications Telecom cabinets Data centers Customer premises Local area networks Wide area networks Remote terminals Distributed antenna systems (DAS)
CMAX Inoor CPE - Fully compliant with Mobile WiMAX Wave 2 - 802.11 b/g/n support - Qos mapping between IEEE802.16e and IEEE802.16e - NAT and DHCP support - 1 ~ 2 VoIP ports - 1 ~ 4 10/100 Base Ethernet ports - Secure authentication and data encryption - Easy and secure WiFi Setup using WPS [WiFi Protected Setup] - WiFi Internet connectivity via mobile WiMAX Wave 2 - Accommodating legacy WiFi devices and Ethernet connection - VoIP through legacy telephone - Web based configuration, management and software update CMAX Femto - Fully compliant with WiMAX Forum Wave 2 - Self - Organizing Network [SON] - NWG and IEEE 802.16e compliant MAC protocol stack - NMS/EMS, remote management interface support - Mobile service via broadband access network [XDSL, Cable Modem, FTTH] - Indoor [home or office] service coverage and capacity expansion CMAX RRH Type Pico AP - Fully compliant with WiMAX Forum Wave 2 - Supports WiMAX forum NWG profile C - Self - Orgainzing Network [SON] - Naximum 24 Remote Unit support - ETH 1000 Base T between MU/DU and RUs - NMS/EMS, remote management interface support - Easy and efficient coverage extension for In-building service - Covering large size buildings with low cost CMAX Pico - Fully compliant with WiMAX Forum Wave 2 - Self - Organizing Network [SON] - NWG and IEEE 802.16e compliant MAC protocol stack - NMS/EMS, remote management interface support - In-building service coverage capacity expansion [Office / Camus building, Airport, Shopping center] - Enabling FMS or Wireless data-centric services in in-building area CMAX USB Dongle - Fully compliant with Mobile WiMAX Wave 2 - 23 dBm output power - 0 to 270 degrees rotatable USB connector - Status indication LED - Internet Access via Mobile WiMAX We¢®E¡ËcE¡Ë¢çEc¯re looking forward to have chances to provide our quality products and build up close relationships as your business expands. If you are interesting our products, please contact us any time. Then, the specification, price and something else needed, can be negotiable.
