430 stainless steel is a type of ferritic stainless steel that is commonly used in a variety of industrial applications. It contains chromium, which provides corrosion resistance, as well as other elements such as nickel and molybdenum. Some key properties of 430 stainless steel include: Corrosion resistance: 430 stainless steel offers good corrosion resistance in mildly corrosive environments, such as those found in food processing and indoor applications. However, it is not recommended for use in highly corrosive environments. Heat resistance: 430 stainless steel can withstand high temperatures up to 815�°C (1500�°F) without losing its strength or corrosion resistance properties. Formability: 430 stainless steel is easily formable, making it a popular choice for applications that require forming or bending. Magnetic properties: 430 stainless steel is magnetic, which makes it a popular choice for applications that require magnetic properties, such as solenoid valves and transformers. Some common applications for 430 stainless steel include: Automotive trim and molding Kitchen appliances such as refrigerators, dishwashers, and ranges Indoor and outdoor architectural trim Heat exchangers Solenoid valves and transformers Overall, 430 stainless steel is a versatile material that offers good corrosion resistance, heat resistance, and formability, making it a popular choice for a variety of industrial applications. Here are some of the most common international standards for 430 stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A268/A268M: Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes EN 10088-2: Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes JIS G4304: Hot-rolled stainless steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip We can provide the following form:430 stainless steel coil; 430 stainless stee strip;430 stainless stee plate; 430 stainless steel sheets; 430 stainless steel tubes; 430 stainless steel pipe; 430 stainless steel flat; 430 stainless steel bar
Hastelloy N is a nickel-based corrosion-resistant alloy that is known for its excellent high-temperature and high-stress properties. This alloy is composed of nickel, molybdenum, iron, chromium, cobalt, and trace amounts of other elements such as copper, aluminum, and titanium. The chemical composition of Hastelloy N typically includes 65-70% nickel, 4.0-6.0% molybdenum, 2.0-4.0% iron, 1.0-3.0% chromium, and 1.0-3.0% cobalt. These elements work together to provide a combination of strength and corrosion resistance, making Hastelloy N suitable for use in harsh environments. In terms of mechanical properties, Hastelloy N has a minimum tensile strength of 690 MPa, a minimum yield strength of 310 MPa, and a minimum elongation of 40%. Its hardness, as measured by the Brinell hardness scale (HB), is typically no greater than 241. These properties make it a reliable and durable material for use in various applications. One of the major advantages of Hastelloy N is its excellent resistance to corrosion in a wide range of environments, including high-temperature and high-stress situations. This makes it a popular choice for use in applications such as chemical processing, petrochemical production, pollution control, and nuclear fuel processing, where exposure to corrosive environments is common. Hastelloy N is produced according to various international standards, including ASTM B619, ASTM B626, ASME SB619, ASME SB626, DIN 17744, WERKSTOFF Nr. 2.4648, and JIS NW4400. These standards specify the chemical composition, mechanical properties, processing methods, and testing procedures for Hastelloy N, ensuring consistent quality and reliability. Overall, Hastelloy N is a high-performance alloy that is valued for its exceptional corrosion resistance, strength, and durability in harsh environments. Here are the international standards for Hastelloy N: American Standards: AMS 5870: Hastelloy N sheet, strip, and plate standard specification; AMS 5886: Hastelloy N rod, bar, and wire standard specification; AMS 5887: Hastelloy N seamless or welded pipe and tube standard specification. We can provide the following the products:Hastelloy N coil; Hastelloy N strip;Hastelloy N plate; Hastelloy N sheets; Hastelloy N tube; Hastelloy N pipe;Hastelloy N flat; Hastelloy N bar GB/JIS:NW6693/UNS:N10003/W.Nr:2.4648
Hastelloy G-30 is a high chromium nickel-base alloy which has superior corrosion resistance over most other nickel and iron-base alloys in commercial phosphoric acid as well as many complex environments containing highly oxidizing acids such as nitric/hydrochloric, nitric/hydrofluoric and sulfuric acids. It has good resistance to localized corrosion and to both reducing and oxidizing aqueous media. In addition to its excellent corrosion resistance, Hastelloy G-30 also exhibits good mechanical properties, such as high strength and ductility. It can be easily formed, welded, and machined using standard processes, making it suitable for a wide range of applications in various industries, including chemical processing, petrochemical, pollution control, pulp and paper, and more. Some of the key features and benefits of Hastelloy G-30 include: Excellent corrosion resistance in highly oxidizing acids and other aggressive environments Good resistance to localized corrosion caused by chlorides and other halide ions High strength and ductility Good formability, weldability, and machinability Suitable for a wide range of applications in various industries Overall, Hastelloy G-30 is an excellent choice for applications that require superior corrosion resistance and high mechanical properties in highly aggressive environments. Its unique combination of chemical composition and mechanical properties make it a versatile and reliable alloy for a wide range of industrial applications. American Standards: AMS 5878: Standard Specification for Hastelloy G-30 Plate, Sheet, and Strip; AMS 5838: Standard Specification for Hastelloy G-30 Bars and Shapes; ASME SB 582: Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy (UNS N06007) Plate, Sheet, and Strip; ASME SB 575: Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip; ASME SB 581: Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy (UNS N06007) Seamless Pipe and Tube; ASME SB 462: Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service. We can provide the following the products:Hastelloy G-30 coil; Hastelloy G-30 strip;Hastelloy G-30 plate; Hastelloy G-30 sheets; Hastelloy G-30 tube; Hastelloy G-30 pipe;Hastelloy G-30 flat; Hastelloy G-30 bar BS:HR 202/JIS:NW6030/UNS:N06030/W.Nr:2.4603
* Stainless steel is a versatile material common to industrial uses such as lockwire and spring wire, and also used extensively in the medical field due to its ability to meet demanding applications at relatively low cost. Wire can be made as round or flat ribbon and finished in a variety of tempers. Applications Off-Shore Oil Drilling Companies Power Generation Petrochemicals Gas Processing Specialty Chemicals Pharmaceuticals Pharmaceutical Equipment Chemical Equipment Sea Water Equipment Heat Exchangers Condensers Pulp and Paper Industry
* Stainless steel is a versatile material common to industrial uses such as lockwire and spring wire, and also used extensively in the medical field due to its ability to meet demanding applications at relatively low cost. Wire can be made as round or flat ribbon and finished in a variety of tempers. Applications Off-Shore Oil Drilling Companies Power Generation Petrochemicals Gas Processing Specialty Chemicals Pharmaceuticals Pharmaceutical Equipment Chemical Equipment Sea Water Equipment Heat Exchangers Condensers Pulp and Paper Industry
Standard ASTM B574 / ASME SB574 Dimensions ASTM, ASME and API Round Bars Size 10 mm To 100 mm Dia in 100 mm TO 6000 mm Length. Round bar Diameter 3-~800mm Hex Bar size 2-100mm A/F Square bar size 4 to 100mm Flat bar Thickness 2 -100mm Flat bar Width 10 to 500mm Length 3 to 6 meter, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,
Standard ASTM A479 / ASME SA479 Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI Round Bars Outside Diameter in the range of 4mm to 500mm Bright Bars Outside Diameter in the range of 4mm to 100mm Hex Bars 18mm - 57mm (11/16 to 2-3/4) Square Bars 18mm - 47mm (11/16 to 1-3/4) Flat Bars 1/2 to 10 in thickness range of 2mm to 150mm Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish Length 1 to 6 Meters, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Standards ASTM / ASME A240 / SA240 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching. Finish Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
1. SS FLAT Bar 2. Grade:200/300/400 Series 3. Type:Hot Rolled/Cold Rolled 4. Certification: ISO 5. Surface: Bright,pickled,black. 6. Thickness:18mm 7. Width:600mm 8. Length: 6000mm 9. Standard:JIS,AISI,ASTM,GB,DIN and EN 10.Delievery Time: Earliest possible time. 11. Applicationï¼?Industryï¼?building materials,machinery,construction.
Product Name: Stainless steel seamless Tubing Body Material 316S.S. 316LS.S. 304S.S. 304LS.S. Working pressure: Maximum to 10200psig Tube O.D. Size 1/8in,1/4in, 3/8in, 1/2in, 5/8in, 3/4in, 1in 3mm, 6mm, 8mm, 10mm, 12mm,16mm,18mm,20mm,22mm Nominal Wall thickness: 0.028in, 0.035in, 0.049in, 0.065in ,0.083in 0.8mm,1.0mm, 1.5mm,2.0mm Nominal Length: 3 meters 6 meters 20 feet customized Surface Condition: Mechanically polished Bright Annealed electropolishing Certificate ISO9001:2015 Package Type : plastic
Polished 304 Stainless Pipe is a standard stainless pipe that has been polished to a 180 Grit Brushed Finish on its exterior for cosmetic and ornamental applications. Unlike the dull mill finish of standard stainless pipe, this polished stainless steel pipe allows your projects to have a more finished look with excellent corrosion resistance making it ideal for handrails, architectural design, restaurant and store fixtures, trade show displays, marine components and more. Just like standard stainless pipe it has an interior weld seam. SPECIFICATIONS: Type 304/304L Welded, ASTM A312 FINISH: 180 Grit Polish, Brushed Finish CHARACTERISTICS: Welding = Excellent Machining / Grinding = Fair Bending / Forming = Good Wear Resistance = Excellent Corrosion Resistance = Excellent MECHANICAL PROPERTIES: Tensile Strength = 85,800 psi Yield Point = 34,000 psi Elongation = 60% in 2" ; Elasticity = 29,000 ksi Shearing Strength = 11,500 psi Brinell Hardness = 170; Density = .289 lb/in AVAILABLE LENGTHS: 4ft. 6ft, 8ft, 10ft, 20ft, or Cut to Size
- Material26MnB5, 34MnB5, EN 10305-2 (DIN 2393) - Technical: Seamless Or Welded; Process: Cold Drawn, Cold Rolled; - Delivery Condition: +C, +N, +SR,+NBK; - Diameter: 20 - 60 mm, Wall thickness: 1.5 - 7.5 mm; Length: Customizable; - Application: Stabiliser, Monobloc shaft, Gear shaft etc.; - Requirements: Excellent reshaping properties (drawing in, hammering), High torsional strength and durability, Excellent welding properties, High levels of geometrical accuracy (eccentricity, roundness), Excellent surface-finish condition.
- Material: SPCC-KL SPCD-SD Low Carbon Steel or can be altered according to customers' requirements; - Products Size: OD 4.0mm~12.70mm, Wall thickness 0.5mm~1.0mm; - Processing: Welded, Cold Drawn, Zinc coating outer side, Copper coating outer side, Copper coating both sides; - Salt spray test time: 24 ~240 hours; - Main Use: widely used in condenser, evaporator, refrigerators, freezer, automobiles and heaters etc.; - Mechanical Character: tensile strength more than 290 , yield strength more than 180 , elongation more than 25%; - Features: soft and easy to bend.
13-8 stainless is a martensitic precipitation hardening stainless steel that has excellent strength, high hardness, superior toughness and good corrosion resistance. Good transverse toughness properties are achieved by tight chemical composition control, low carbon content, and vacuum melting. Typical applications are large airframe structural components and injection molding equipment. Chemistry Ni Cr Mo C P S Si Mn N Al Fe MIN 7.5 12.25 2.0 0.90 MAX 8.5 13.25 2.5 0.05 0.01 0.008 0.1 0.2 0.1 1.35 Balance Specifications: AMS 5629 ASTM A 564 GR 13-8PH EN 1.4548 UNS S13800 Werkstoff 1.4548 Features: Martensitic, precipitation hardening (maraging) stainless steel. Applications: Aerospace components Injection molding equipment Components in the petrochemical and nuclear industries
Stainless Steel Seamless Pipe offered comes in superior seamless construction finish and can be made available in different finish choices as demanded by the customers. Further, these are developed using cold drawn/cold rolling options as per industry standards like ASTM, JIS, DIN and others. We offer these pipes in different outer diameters like 1/8 to 32 as well as in wall thickness options of SCH10S, SCH40S, SCH80S and others. Some of its features include: â?¢ Available in different material grade options Choice of different finish lengths of 1 to 12m or per customer demands Option of different surface treatments like polishing, annealing, bright annealing and others