Silicone rubber ZY -850 suitable for the production of ordinary silicone products, such as silicone rubber buttons, sealing rings, etc. Appearance translucent solid, density 1.14±0.03, hardness 50±3, tensile strength 7.5, elongation 315, tear strength 11, shrinkage 3.2~3.6, rebound elasticty 60, plasticity 195±20, vulcanizing agent double 2.5.
Mesh: 30 Mesh Type: Powder Color: Black Country of Origin: Made in India Made from: Tyre Packaging Type: Loose
MOQ:1000KGS Appoication:Vulcanized By DBPH,applicable to manufacture molding silicone rubber compound silicone rubber parts,sealing parts,rubber keypad etc., especially for colored rubber parts. Color: Translucent solid, Milky-white, no mechanical impurities.
Item: OTT-Y230 Mixing ratio: 9:1 Color: Red/White Hardness: 30;2 Viscosity (mPa.s): 10000;¨¤3000 Working Time (25;;): 10-40mins Curing Time (25;;): 1-6 h Tear-Strength (kN/m):;Y25 Tensile- Strength (Mpa):;Y5.5 Elogation (%):;Y500 Shrinkage(%):;0.1 1kg/tin;;5kg/tin;;20kg/drum;;25kg/drum;;200kg/drum
Item: OTT-J825 Mixing ratio:1:1/10:1 Color: Translucent Hardness: 25;¨¤2 Viscosity (mPa.s): 7000;¨¤2000 Working Time (25;;):20-40mins Curing Time (25;;):3-5h Tear-Strength (kN/m):;Y24 Tensile- Strength (Mpa):;Y6.3 Elogation (%):;Y500 Shrinkage(%):;0.1 1kg/tin;;5kg/tin ;20kg/drum;;25kg/drum;;200kg/drum
The platinum cure silicone rubber can be applied to the mold making industries that used the fiberglass, gypsum, resin, candle, soap, etc. as raw material; or the food mold making industries, tire casting, rapid prototyping and artificial stone crafts. It gets the acknowledgment of the FDA, and its mixing ration is 10:1 or 1:1, which made the operation more easy. Besides that, it also has a lower shrinkage than the mould making silicone. If you have high requirements for shrinkage, then the platinum cure silicone rubber will be your best choice! Operation method of the platinum cure silicone rubber: 1.Mix the platinum cure silicone rubber and the catalyst in a mixing ration of 1:1 and do the process of the vacumn pumping. (If there is no vacumn machine, you can just pour the mixture slowly from the corner so that less bubbles caused.) 2.Put the product which is covered with a layer of release agent in the middle of a squre frame formed of 4 wooden or plastic plates. 3.Pour the mixture into the frame. 4.After 3 to 5 hours, when the silicone cured, get out the original mold, then you get a finished platinum cured silicone mold. And if you are interested in the platinum cure silicone rubber, you can contact Charlie through the information in the company profile.
Reclaimed Rubber from whole tire , Used in all rubber based industries premium quality
Reclaimed natural rubber white ivory color Reclaimed natural black color Tensile : 7-12 mpa Mooney : 40-50 Elongation : 500-600 **Price bases on spec of goods
+ Milky white colour + Ammoniacal odour + Dry rubber content, DRC 60% Min + Non Rubber Content,NRC 1.5% Max + Total Solid content, TSC 61.6% + Ammonia Content 0.60% Min + Volatile Fatty Acid, VFA 0.04 Max + Original Viscosity, OV 70-110 cps + Mechanical stability Time MST 800-1200 sec +Zinc oxide stability time ZST 120 sec Min + Potassium Hydroxide, KOH 060 Max + pH value 10.50 Min + Coagulum content 0.015% Max +Sludge Content 0.02% Max +Origin India +Packing in flexitanks/barrels
SBR Crumb Rubber Granules we are offering:- 2-5 MM SBR Rubber Granules (Watch Product Video) 2-4 MM SBR Rubber Granules (Watch Product Video) 5-10 MM SBR Rubber Granules(Watch Product Video) Packing: 45-50 Kilograms PP Bags(Printed or Plain)
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability. Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Khandesh Enterprise has made a name for itself by manufacturing completely pollution-free, Rubber Crumb, Rubber Powder, Recycled Buffing Powder and Rubber Granule. The products we offer are affordable and also superior in terms of quality.
Khandesh Enterprise has made a name for itself by manufacturing completely pollution-free, Rubber Crumb, Rubber Powder, Recycled Buffing Powder and Rubber Granule. The products we offer are affordable and also superior in terms of quality.
Granules size 0-2/2-4/4-6
Rubber Powder
TYPES OF MATERIAL USED : Fluorocarbon Elastomer FKM (Viton), Silicon, Fluoro silicon, Neoprene (CR), Nitrile (NBR), SBR, PBR, PU, EPDM / EPM, Butyl, Hypalon, Natural, PTFE-Pure & filled grades, Aflas etc.
- RSS3 rubber sheets are used in the production of Tyres (tires) & Tubes, Tread Carcass, Off road tyres & ADV tyres, Extruded hoses, Footwear etc. Tyre industry is the biggest consumer of RSS3 rubber sheets. - Dry mould no more than 10%, clean , dry, strong, small-scattered bubbles, specks of bark, free from blemishes, sand, foreign matter, under-cured. Dirt (Max % Wt) 0.008 Ash (Max % Wt) 0.304 Volatile matter (Max % Wt) 0.34 Nitrogen content (Max % Wt) 0.43 PRI (Min) 83.1 Innitial Wallace plasticity 41
Cheap liquid silicone rubber to make molds for lost was casting Lost wax casting silicone 1.Description Gc rtv silicone c-825 are good for lost wax casting. They are widely used for lost wax process of bronze casting to make accurate reproductions of original sculpture. We manufacture and supply figurines molding silicone rubber, sculpture molding silicone rubber, foundry molding silicone rubber, art casting silicone rubber, foundry casting silicone rubber, etc with best quality and price in china. 3. Features Low viscosity, great flexibility, extra low shrinkage, chemical resistance, release properties, easy to work with, high tear strength, heat resistance, various color is available, high reproduction rate 4.Appearance Part a: silicone rubber is a white liquid Part b: catalyst is a non-toxic and odorless liquid, white transparent color. Att: we can provide fast/medium/slow catalyst of for hot, warm or cold season. 5.Shelf life: When stored at or below 32c (89.6f) in the original unopened containers, c-8 series silicone base and its curing agents have a usable life of i0 months. 6.Package Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum. Curing agent: 30g/bottle; 1kg/bottle
EPDM granules for sports surfaces
Free sample rtv2 mould making silicone rubber for Architectural Molding Architectural Molding Silicone Product No.: C-825 and C-830 Brand: GuoChuang Silicone Application: Making molds for brackets, panels, cornice moulding, statuary etc. Keyword: mold making silicone rubber, rtv2 silicone rubber, liquid silicone rubber,s liquid silicone for molding 1. Description Architectural Reproduction and Restoration specialists use GC liquid mold silicone rubbers to make site molds of aging/damaged ornate architectural elements (e.g., brackets, panels, cornice moulding, statuary). From these molds, reproductions of damaged elements can be cast in the controlled environment of a mold shop. These imperfect castings are resculpted to their original beauty so a rubber production mold can be made from this revised model. This production mold allows repeated casting of the new architectural element in concrete, glass fiber reinforced concrete, plaster, plastic, fiberglass, or other casting media as required for interior or exterior mounting. C-825/C-830 room-temperature curing silicone rubber are popular mold materials for this application and are available in pourable, brushable and sprayable options. C-825/C-830 is A tin-cured silicone rubber with a 100A:3B mix ratio (digital scale required to measure) and a demold time of 3-4 hours. Tin-cured silicones are slightly less expensive than platinum-cured silicones, but have a shorter library life and shrink slightly on cure. 2.Technical Datasheet Typical general characteristics Inspection MethodValue Product data (Catalyzed A+B)C-825C-830 HardnessShore A25±230±2 Mix RatioA:B100:3100:3 Color/WhiteWhite Pot life25 °C (77F)30-40mins30-40mins Curing time25 °C (77F)3-4 hours3-4 hours Mixed viscositymPa.s20000±100023000±1000 Tear-strengthkg/cm22±223±2 Tensile-strengthM.pa4.0±0.55.0±0.5 Elongation%450±50460±50 Shrinkage%0.30.3
