Description of platinum cured silicone rubber Platinum cure silicone rubber is a kind of fda grade silicone , generally named two-components silicone rubber with translucent appearance, part a and part b mixing in 1:1 .It¡¯s suitable for molds making application. Applications of platinum cure silicone rubber Platinum cure silicone rubber mainly used for making concrete stones, wax molds, pu molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making Advantage of platinum cure silicone rubber 1)non- shrinkage (less than 0.1% 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 4)high temperature resistant in 250 centigrade Operation instruction of platinum cure silicone rubber Step one: take 100g of part a and 100g of part b and mix in 1:1 and mix the two part evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 3¡ª5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 810months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part a+ 20kg/drum for part b in one set , 200 kg/drum for part a+ 200kg/drum for part b in one set 25kg/drum
Description of platinum cured silicone rubber Platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .Its mainly suitable for tire molds making . Advantage of platinum cure silicone rubber for tire mold 1)non- shrinkage 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 4)high temperature resistant in 250 centigrade Operation instruction of platinum cure silicone rubber for tire mold Step one: take 100g of part a and 100g of part b and mix in 1:1 and mix the two part evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 35 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part a+ 20kg/drum for part b in one set , 200 kg/drum for part a+ 200kg/drum for part b in one set Iso.Ul, rohs
Silicon rubber for mold making applications 1. Silicon rubber for mold making can used for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy , stationery gifts crafts industry, 2. Silicon rubber for mold making is applicable for large statue buddha, relieve , furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Silicon rubber for mold making is intend for artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for mold making features Silicon rubber for mold making is white flowing liquid with general hardness of 22-50aafter curing with features (1) high tensile & tear strength (2) high duplication times (3) low linear shrinkage (4) resistance to high-temperature (5) low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for mold making operation instructions Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: brushing cast & perfusion molding operation Shelf life for silicon rubber for mold making 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum 25kg/drum
Hello sir / madam We produce a rubber all modul products and we will waiting for supply to buyer for full quality to our satisfaction Thank you F1exports team Any lot size
Pad printing silicon rubber features: 1)High print times 2)Abrasion resistance. 3)Good printing effects 4)Permanent and durable Pad printing silicon rubber operation instructions: . Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 35 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the vacuumed mixture into the original mold slowly, Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kgs/drum vacuumed packing 25kg/drum
Dear valued customers, On behalf of leaders and staffs of investcom investment jsc., i would like to give our best regards to you. Investcom investment jsc., is one of the most prestigious companies in the line of processing, exporting natural rubber; importing, selling building materials, interior products and investing into real estate. From the foundation period till present, investcom always concentrate on maintaining our leading prestige in vietnam about product quality and the way of serving customers. We’re vietnamese private natural rubber factory and we also have 2 marble quarries. Rightnow we're selling natural rubber Thank you and best regards. Standard
Silicon hy-638# applications: Silicon rubber is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 0.2% Silicon hy-638# general description: Rtv-2 molding silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. And fabrication of precision molds 20kg/drum 25kg/drum 200kg/drum
Silicon rubber HY-638 application: Silicon RTV (HY-638 ) is two parts condensation liquid silicone rubber that can be cure under room temperature. silicon rubber mainly used for the manufacturer of products made of unsaturated resin, epoxy resin, polyurethane, etc. Silicon rubber(HY-638) features: HY-638# silicon rubber is mainly with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. silicon rubber(HY-638) is the most suitable for small products or fine and precision products which is difficult to demould. This silicon rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage less than 0.2% 25KG/DRUM, 200KG/DRUM
We are supplying various types of rubber: svr 3l, svr l, svr 10, svr 10cv, svr 20vc, svr cv60, svr cv50, svr 20, svr 5, natural latex concentrate (ha, la, xa) ribbed smoked sheet classification (rss 1, 2, 3, 4, 5) Bag 33.3kg
Standard Vietnam Rubber(SVR):TCVN(3679-2004)Based on ISO: 2000-2003. 33,33kg or 35kg/ Loose Bale
Moony viscosity- 35-55 Tensile strength-8.5 mpa minimum Acetone extract- 12 % max Ash content- 4 % max Hardness - 53-57 Carbon content- 30 minimum Specific gravity 1.10-1.14. As per customer requirements
Vietnam origin natural rubber.
Butyl rubber has several features like good gas tightness, ozone resistance, aging resistance, good thermo stability, inorganic acid resistance and common solvent proof. Also... Short and fast mixing power Reduce power consumption Low heat buildup in processing Low thermo plasticity High rate of curing Cost reduction Long shelf life. 25kg/pc, naked with calcium powder, packaged with white/black plastic film, woven bag, packaged by pallet.
Targets of chemical - SVR 3l management of rubber by TCVN 3769:2004. 1. Concentrations of contaminants retained on the 45m sieve,% m / m, not more than: 0.03 2. Ash,% m / m, not more than: 0.50 3. Nitrogen content,% m / m, not more than: .60 4. Volatiles content,% m / m, not more than: 0.80 5. Early plasticity (Po), not less than: 35 6. Maintain the viscosity index (PRI), not less than: 60 7. Lovibond color index, the form, not more than: 6 8. Mooney viscosity ML (1 '+ 4') 1000C. 33, 33kg/loose bale/ load on 20'DC container/20mts.
Targets of chemical - management by the rubber SVR 10 TCVN 3769:2004. 1. Concentrations of contaminants retained on the 45m sieve,% m / m, not more than: 0.08 2. Ash,% m / m, not more than: 0.60 3. Nitrogen content,% m / m, not more than: .60 4. Volatiles content,% m / m, not more than: 0.80 5. Early plasticity (Po), not less than: 30 6. Maintain the viscosity index (PRI), not less than: 50 7. Index Lovibond color, form, not more than: - 8. Mooney viscosity ML (1 '+ 4') 1000C. 33, 33kg/loose bale/load on 20'dc container/20mts.
1. Concentrations of contaminants retained on the 45m sieve,% m / m, not more than: 0.16 2. Ash,% m / m, not more than: 0.80 3. Nitrogen content,% m / m, not more than: .60 4. Volatiles content,% m / m, not more than: 0.80 5. Early plasticity (Po), not less than: 30 6. Maintain the viscosity index (PRI), not less than: 40 7. Index Lovibond color, form, not more than: - 8. Mooney viscosity ML (1 '+ 4') 1000C. 33, 33kg/loose bale/load on 20'dc container/20mts.
It will be grade 1 products. 25 or 50 kg bell. Ready for export. Kuflam 3 grain = 1kg. All type of Garments item. Other item also. Garments and other products international standard packing.
We serve the export of rubber latex lumb in large quantities according to your needs, and we are also looking for investors for rubber plantation that we manage (with profit sharing system, the core pattern and plasma, the ratio 50%: 10%: 40%, 50% for investors, 10% of us / managers, 40% owner of the land / people / our members). Perton, minimum order per container.
- Origin: Viet Nam - Quality: Viet Nam standar - Payment: TT or 100% Irre L/C - Packing: 33.33kgs/wooden pallets/ load on 20FCL . Viet Nam Standard.
Product Description: Targets of chemical - SVR 3L management of rubber by TCVN 3769:2004 1. Concentrations of contaminants retained on the 45m sieve,% m / m, not more than: 0.03 2. Ash,% m / m, not more than: 0.50 3. Nitrogen content,% m / m, not more than: .60 4. Volatiles content,% m / m, not more than: 0.80 5. Early plasticity (Po), not less than: 35 6. Maintain the viscosity index (PRI), not less than: 60 7. Lovibond color index, the form, not more than: 6 8. Mooney viscosity ML (1 '+ 4') 1000C. 33,33kg/loose bale.
