Laira Group is capable of selling bitumen to its customers based on the PG method. PG is defined as polymer-modified bitumen and pure bitumen based on environmental conditions and temperature. HIGH-TEMPERATURE PERFORMANCE LOW-TEMPERATURE PERFORMANCE PG 46 -34, -40,-46 PG 52 -10, -16, -22, -28, -34,-40,-46V PG 58 -10, -16, -22, -28, -34, -40 PG 64 -10, -16, -22, -28, -34, -40 PG 70 -10, -16, -22, -28, -34, -40 PG 76 -10, -16, -22, -28, -34 PG 82 -10, -16, -22, -28, -34
To grade the bitumen-based on viscosity BIS revised IS-73-1992 specifications (Viscosity at 60 C) and as such there are four grades VG-10, VG-20, VG-30 & VG-40. A few qualification tests like specific gravity, water content, ductility, loss on heating & fares breaking point were removed from IS:73-1992 as these tests do not have any relationship with the performance of the product. Viscosity Grade Bitumen is widely used in spraying applications such as surface-dressing and paving in very cold climates. It is also used to manufacture bitumen emulsion and modified bitumen products.
Cutback Bitumen is made by reducing the viscosity of and ordinary bitumen by adding mostly petroleum-type solvent. Cutback Bitumen is used because its viscosity is lower than that of neat asphalt and can thus be used in low-temperature applications. Cutbacks are divided into three classification: Slow Curing (SC) SC-70 SC-250 SC-800 SC-3000, Medium Curing (MC) MC-30 MC-70 MC-250 MC-800 MC-3000, Rapid Curing (RC) RC-70 RC-250 RC-800 RC-3000. Laira Group offers high quality and reasonable prices, due to several years of experience in delivering Bitumen products, the Laira sales team is dedicated and understands your requirements.
Bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, coating improvers, anti-strips, or break control agents. It is well known that water and asphalt will not mix, except under carefully controlled conditions using highly specialized equipment and chemical additives. Bitumen emulsions are divided into three categories in terms of setting: 1. Rapid-setting (RS) 2. Medium-setting (MS) 3. Slow-setting (SS)
SIGNATURE 20W-40 is high performance conventional four-stroke motorcycle engine oils primarily intended for general use in all types of four-stroke motorcycles and engines. Features and Benefits Quality mineral oils and an advanced additive system to provide good engine cleanliness, good wear protection and corrosion protection. Motorcycle engine oils protect engine and gear and make clutch working. Packing :- 500ml , 900ml , 1ltr , 50ltr, 210ltr
We Are Manufacturer Of Engine Oil Lubricants 0W16, 0W20, 0W30, 5W20, 5W30 And Many More
Universal lubrication oil added funnel is suitable for 98% car models to added Oil.
Dear Sir/Madam I am Taufiqul Hakim Tsabit. We are direct with Russian refinery and we are ready to supply this product: ASPHALT BITUMEN 60/70 RUSSIAN ORIGIN Minimum liftable quantity: 100,000 MT, Maximum: 400,000 MT. Monthly price: Gross $350.00 USD / $340.00 USD Net on CIF Gross $340.00 USD / $330.00 USD Net on FOB Origin: Russia Commission: $5.00USD buyer side / $5.00USD seller side.
Dear Sir/Madam I am Taufiqul Hakim Tsabit. We are direct with Russian refinery and we are ready to supply this product: LIQUEFIED PETROLEUM GAS (LPG) Minimum liftable quantity: 100,000 MT, Maximum: 400,000 MT. Monthly price: Gross $350.00 USD / $340.00 USD Net on CIF Gross $340.00 USD / $330.00 USD Net on FOB Origin: Russia Commission: $5.00USD buyer side / $5.00USD seller side.
Dear Sir/Madam I am Taufiqul Hakim Tsabit. We are direct with Russian refinery and we are ready to supply this product: LIQUEFIED NATURAL GAS (LNG) Minimum liftable quantity: 100,000 MT, Maximum: 400,000 MT. Monthly price: Gross $350.00 USD / $340.00 USD Net ON CIF Gross $340.00 USD / $330.00 USD Net ON FOB Origin: Russia Commission: $5.00USD buyer side / $5.00USD seller side.
Waterproof bitumen tar paper commonly known as linoleum. A waterproof material used in the construction industry. The base paper has coarse texture, good oil absorption and certain tensile strength. Generally, rags and waste paper are used as raw materials, and high-grade ones can be mixed with some animal hair and slag cotton, which can be copied after beating directly. During processing, the base paper passes through the molten asphalt and is extruded by the hot roller to make the asphalt soak the paper layer, extrude the excess asphalt, and spread talc powder or fragment Mica on the surface for cooling. Use less.
AVAILABLE BITUMEN GRADE 60/70 , QUANTITY AS PER YOUR REQUIREMENT DIRECTLY FROM REFINERY OF GULF AREA IN BULK QUANTITY (US$ 435 PER MT OR TON AT FOB). THE PRICE WILL BE VALID FOR 15 DAYS ONLY.
Origin:-Germany Uses:- To meet the set industry standard, we are extremely engaged in offering a premium quality PVC Lubricant (LOXIOL G 12) that is processed in accordance with the market standards. Origin : Emery Oleochemicals, Germany Packing : 25/kgs Bag Chemical Characteristic : Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for liquid paraffin, natural paraffin etc.
Origin:-Germany Uses:- To meet the set industry standard, we are extremely engaged in offering a premium quality PVC Lubricant (LOXIOL G 12) that is processed in accordance with the market standards. Origin : Emery Oleochemicals, Germany Packing : 25/kgs Bag Chemical Characteristic : Low adhesive, high softening point and good hardness with stable chemical characteristics of good heat stability, good dispersion performance, no poison, no frost and mucous membrane; as an ideal interior & exterior lubricant, it can be used as a substitute for liquid paraffin, natural paraffin etc.
Basic Characteristics Appearance: slightly yellow to colorless viscous liquid Ionicity: Cationic PH value: 4.5-6.5 Solubility: can be can be dissolved in water at any ratio Active content: 42 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantages Hand feeling: instantly hydrophilic, comprehensive feel better This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for b leaching or light-colored fabric; Itis particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;. Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage Method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended use ratio can be diluted 1: 2.5 (20% solids) or 1 : 5 (10% solids) , do not need to adjust the pH value, the appearance of colorless transparent liquid; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180 stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Basic Characteristics Appearance: slightly yellow viscous liquid Ionicity: Cationic pH value: 6--8 Solubility: self-emulsifying, can be can be dissolved in water at any ratio Active content: 85 1% Hand feeling: instantly hydrophilic, comprehensive feel better Features And Advantage This product is cationized amino and polyether modified multi-copolymer block silicone oil, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric; It is particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel; It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;. Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO. Usage first adding isomer alcoholether 1306 emulsifier, then add cotton MBS 9908 (recommended 9908: emulsifier = 4-6: 1), mix well and then add 1-1.5% glacial acetic acid; then slowly add water to the desired concentration., the recommended use ratio can be diluted 1: 5 (20% solids) or 1 : 10 (10% solids) , the appearance of colorless transparent liquid; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min,bath ratio 1: 20-40; Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180stereotypes baking; Packaging and storage 50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for one year.
Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 60 1% Product characteristics: Soluble in cold water, impart surface smooth, inner soft and elasticity Super yellowing-resistant, shearing resistant and warm water washing Processing PH range from 1-11, high temperature 90C'-10C' resistant Improve sewing ability, especially suitable for cotton woven fabric Highly resistant to electrolytes, suitable for resin finishing Non-toxic to cellulase Usage Method: Padding recommended usage: 5-20g/l, 1g/l acetic acid as well Exhausting: 0.5%-2% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package and Storage: 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options: The lubricator and riser section range is available with the following options : 3.00â??ID to 9.00â?? ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 �°C Choice of quick union or API flanged connections Choice of bleed port connections Technical Features: On conventional lubricators, the component parts are screwed together by means of a special TIS acme connection, which has a primary o-ring seal and secondary metal to metal seal On integral type lubricators, the quick union collars can be very quickly and easily removed for cleaning, inspection, etc Integral lubricator sections can also be provided with an optional full re-cut facility on quick union connections.
Origin Iran Payment term LC/DLC/TT/SBLC
Canroyal Full Synthetic Gasoline Engine Oil Sae 5w30 Api Sn
