LNG gas from Petronas.
For Sale from our Genuine Seller LNG , Buyer must provide Company CIS , POF or BCL from his bank
All types of lubricants
Bitumen available Various variants like 40/50, 50/60, 50/70, 60/70, 100/120, VG10, VG30, etc. Payment through SBLC/LC/DLC. Bulk quantities are available. Final SPA to be done between end-seller & end-buyer.
XPT202 ZDDP zinc dialkyl dithiophosphate antioxidant and corrosion inhibitor zinc booster Product Description XPT202 is Zinc Butyl Octyl Primary Alkyl Dithiophosphate (ZDDP). This product features favorable  anti-oxidation and anti-corrosion  performance and anti-wear and extreme pressure properties. It can effectively protect engine bearings from corrosion, and prevent oil viscosity growth due to oxidation in a high temperature. The product is light in color and nice in oil solubility and additive compatibility. It can be widely adopted in various industrial lubricating oils such as gear oil and hydraulic oil. Combined with detergents and dispersants, the product can be used to produce all grades engine oils. The dosage is 0.5%-3.0%. ZDDP CAS No. 68649-42-3 Parameters  Item Typical Value Appearance Amber transparent liquid Color Number 0.8 Flash Point (COC), â?? 195 Kinematic Viscosity(100â??), mm2/s 11.6 Density(20â??) ,kg/m3 1092 S Content, m% 15.7 P Content, m% 7.6 Zn Content, m% 9.0 PH Value 5.9 Water Content,� m% 0.01 Application 1. Primarily used for various internal combustion engine oils 2. Zinc booster used for gear oils, hydraulic oils, bearing oils, rail oils and metalworking oils; but it can not be used with silver parts. 3. The dosage: 0.5-3.0%  Iron Drum:  Usually 180-200kg; IBC Tank:  Around 1147kg;  ISO Tank:  20Ton
T746 Dodecylene Succinic Acid Product Introduction This product has good oil solubility, can form a firm oil film on the metal surface, which fully protects metals from corrosion and rusting.It is an excellent rust inhibitor for oils.But the anti-rust performance for lead and cast iron are not good. Application As rust inhibitor, it is used primarily for blending steam turbine oils, machine tool oils, hydraulic oils,hydraulic transmission oils, and anti-rust grease, etc. Reference Dosage The dosage is from 0.02% to 0.8% when blending oil. Product Paramenters Item Typical Value Appearance transparent viscous liquid Density (20�°C), kg/m3 Report Flash Point (open cup), �°C, 90 min Kinematic Viscosity(100�°C), mm2/s Report Iodine Value, g I/100g 50 Acid value, mgKOH/g 285 PH Value 4.2 min Copper Corrosion(100 C,3h), level 1 max
Product range as follow ; * MOBIS ( Hyundai & Kia ) * SSANGYONG Genuine Parts * GM Daewoo Genuine Parts * O.E.M Parts / All kinds * LUBRICANTS & OIL Anyway, If you need some information about all kinds of auto parts for Korean cars, please contact me. Do not hesitate.. Also, Among the above brands, If you are interested in something, please let me know too.. We will present to you more details.. If you have any inquiry, please send it to us as follow contact point.. We would like to do business with your esteemed company for a long time..
Origin Ayzerbadzhan terms of delivery CIF or FOB, price discount minus 8% of the price of Europe and Asia platz. Payment terms 10% T/T, balance 90% upon arrival at Buyer's port. Contract conclusion procedure Factory visit Approval of delivery schedule limits.
Hello Buyer/Buyer Mandate, I am direct mandate to end seller/refineries here in Russia Federation, our refineries can supply to you/your buyers it's products, PETCOKE,M100, D6,D2,JETA1,AGO,LCO,ESPO,JP54, LNG, LPG,DIESEL FUEL EN-590 ULSD, without any delay nor complication.
Hello , We are direct mandate to Russia Refinery, direct suppliers of petroleum/petrochemical products. Our suppliers do supplies products to any safe port in the world. We are connected to the most reputable Russian Refineries and negotiate transactions on behalf of buyers and our refineries. Our petroleum products' best specifications with the best prices as well. Below are the products we have available for an urgent lift in the port of Rotterdam and Russia. Products available for FOB Rotterdam: D6, JET A1, JP54, D2, EN590, LNG & LPG. Products available on CIF Basis: D6, JET A1, JP54, D2, EN590, LNG & LPG, REBCO, Mazut, Bitumen, Urea. Please only for serious buyers or mandate to the buyer.
Jambo bags grade 60/70 All grade's of Iranian bitumen Grades PG: 40/50, 60/70, 80/100 VG: VG10, VG20, VG30 MC10, MC20 etc
SOFT CORPORATE OFFER ATTENTION TO BUYER/BUYER REPRESENTATIVES. Here by issue this Soft Corporate Offer with presented term conditions and confirm our irrevocable corporate and legal responsibility, under penalty of perjury that we are ready, willing and able to supply the below mentioned products herein and issue a draft Contract then Sales Purchase Agreement upon acceptance of our term and conditions stipulated herein. The term and procedures stipulated herein is in accordance with the term and procedures of procuring Oil & Gas products from Russia Federation. Terms Of Negotiation Origin: Russia Federation Performance Bond : (pb) 2% Of The First Month Shipment Value Destination Aswp Incoterms: FOB / CIF / TTO Loading Port: Novorossiysk / Primorsk / Vladivostok / Rotterdam Ports Payment Terms: Irrevocable Lc, T/t Telegraphic Transfer, Bg Or Sblc Mt760, Mt103/23, Mt103 Inspection: SGS, CIQ OR SIMILAR Insurance: Paid By Seller, Covering 110% Of Shipment Value LIQUEFIED PETROLEUM GAS (LPG) Liftable Quantity: 100,000 Mt, Maximum 400,000 Mt Monthly Cif Pricce: Gross Usd $ 280.00/usd $270.00 Net Cif Price F.o.b: Gross Usd $ 270.00mt Net: Usd $ 260.00mt Origin: Russia Loading Port: Primorsk / Vladivostok/ Shakalin/rotterdam CI DIP AND PAY FOB ACCEPTED TERMS AND PROCEDURE 1. Buyer sends ICPO with full banking details CP, Passport Copy and Company registration. 2. Seller issues CI to Buyer. 3. Buyer Sign/endorse CI within 48 hours. 4. Seller issue to Buyer following Transaction Documents: Tank Storage Receipt (TSR Valid 48 hours) Authorization to inspect (DTA Valid 48 hours) Authority to Verify (ATV) 5. Buyer upon receipt of the PPOP documents, buyer contact Tank farm for confirmation of the product and dip test within 48 hours. Note (buyer's Failure To Make Dip Test Within 48 Hours, Buyer Will Bear The Cost Of Further Expenses) 6. Upon successful inspection, Buyer release payment for total product value. 7. Seller Transfer title and Trans-loading commence and issues NCNDA/IMFPA for commission payment.
SOFT CORPORATE OFFER ATTENTION TO BUYER/BUYER REPRESENTATIVES. Here by issue this Soft Corporate Offer with presented term conditions and confirm our irrevocable corporate and legal responsibility, under penalty of perjury that we are ready, willing and able to supply the below mentioned products herein and issue a draft Contract then Sales Purchase Agreement upon acceptance of our term and conditions stipulated herein. The term and procedures stipulated herein is in accordance with the term and procedures of procuring Oil & Gas products from Russia Federation. Terms Of Negotiation Origin: Russia Federation Performance Bond : (pb) 2% Of The First Month Shipment Value Destination Aswp Incoterms: FOB / CIF / TTO Loading Port: Novorossiysk / Primorsk / Vladivostok / Rotterdam Ports Payment Terms: Irrevocable Lc, T/t Telegraphic Transfer, Bg Or Sblc Mt760, Mt103/23, Mt103 Inspection: SGS, CIQ OR SIMILAR Insurance: Paid By Seller, Covering 110% Of Shipment Value Liquefied Natural Gas (lng) Liftable Quantity: 100,000 Mt, Maximum 400,000 Mt Monthly Cif Pricce: Gross Usd $ 290.00/usd $280.00 Net Cif P Rice F.o.b: Gross Usd $ 280.00mt Net: Usd $ 270.00mt Origin: Russia Loading Port: Primorsk / Vladivostok/ Shakalin/rotterdam CI DIP AND PAY FOB ACCEPTED TERMS AND PROCEDURE 1. Buyer sends ICPO with full banking details CP, Passport Copy and Company registration. 2. Seller issues CI to Buyer. 3. Buyer Sign/endorse CI within 48 hours. 4. Seller issue to Buyer following Transaction Documents: Tank Storage Receipt (TSR Valid 48 hours) Authorization to inspect (DTA Valid 48 hours) Authority to Verify (ATV) 5. Buyer upon receipt of the PPOP documents, buyer contact Tank farm for confirmation of the product and dip test within 48 hours. Note (buyer's Failure To Make Dip Test Within 48 Hours, Buyer Will Bear The Cost Of Further Expenses) 6. Upon successful inspection, Buyer release payment for total product value. 7. Seller Transfer title and Trans-loading commence and issues NCNDA/IMFPA for commission payment.
Bitumen All grade Bitumen 60/70 Bitumen 80/100 Bitumen 40/50 Bitumen MC30 Urea Sulphur
Emulsion Bitumen We can provide a wide range of Iran Emulsion Bitumen grades such as CRS, CMS, CSS, RS, MS, SS Cutback (Rapid-Curing, Medium-Curing, Slow-Curing) Cutback Bitumen Slow Curing SC grades are 30, 70, 250, 800 and 3000 Cutback Bitumen Medium Curing MC grades are 30, 70, 250, 800 and 3000 Rapid Curing Cutback Bitumen RC grades are 30, 70, 250, 800 and 3000 Penetration Bitumen Penetration Grade 10-20, 20-30, 30-40, 40-50, 50-70,60-70, 80-100, 85-100, 100-120 Performance Grade PG 58-22, PG 64-16, PG 70-10
SK Gas is LPG specialized company, and aims to become a total energy solution provider LPG (Liquefied Petroleum Gas) refers to propane (C3H8) and butane (C4H10) LNG (Liquefied Natural Gas) Gas Chemical, Propylene and PP (polypropylene) based on LPG Feed basis
Authorize distributors of a complete range of Marine lubricants. GAZPROM MARINE, GAZPROM OIL, MARINE OIL, MARINE ENGINE OIL, MARINE marine UAE, marine Dubai, marine Abu Dhabi, marine Sharjah, marine Fujairah, marine Ras al Khaimah, marine LUBRICANTS middle east. system oil, circulating oil, system oil marine, cylinder oil and system oil, cylinder oil base number, cylinder oil bn40, cylinder oil bn, cylinder oil bn 100, cylinder oil bn 70, cylinder oil bn 25, cylinder oil TBN number, cylinder Lubricants, upper cylinder lubricants, marine cylinder lubricants, turbine oil 46, turbine oil 32, turbine oil vs hydraulic oil, turbine oil 68, turbine oil price, turbine oil vg32.
CALTEX ABU DHABI, CALTEX DUBAI, CALTEX FUJAIRAH, CALTEX LUBE, CALTEX UAE, Chevron / Caltex, chevron marine engine oil, CHEVRON UAE, HAVOLINE LUBE, R&O Chevron OIL, Chevron ENGINE OIL, Chevron Chevron UAE, Chevron Dubai, Chevron Abu Dhabi, Chevron Sharjah, Chevron Fujairah, Chevron ras al khaima, Chevron middle east. Delo diesel engine oils, HDAX gas engine oils, Techron fuel system cleaners, Havoline automotive products or Texaco coolants, hydraulic oils, transmission fluids, gear oils or greases, Compressor oil, air Compressor oil, PAO Compressor oil,
Greetings, bitumen with sulfur, an Iraqi facility... These materials are from a Saudi facility, paraffin oil paraffin wax Vaseline from Our engineering support company is one of the well-known companies in the field of contracting, selling petroleum products and facilitating commercial matters in Iraq. The main branch is in Basra Governorate, the manager branch is Engineer Peleg, the second branch is in Italy, the office manager is Mikdad, the third branch of the company is in Iran.
Specifications AMINE PHOSPHATE COMPOUNDS APPLICATIONS AMINE PHOSPHATE COMPOUNDS/lubricant additive/lubricating oil additive, EP/AW additive equivalent to VANLUBE 672, RC 3740, Irgalube 349. ashless odorless colorless high load carrying extreme pressure additive It is pale yellow transparent liquid. It has excellent EP performance, It is mostly used additive for phosphorus type gear oils, used for blending vehicle & industrial gear oils, hydraulic oil, drilling machine oils and lubricating grease etc. FEATURES Excellent EP properties Good compatiability with other additives Good oil solubility RECOMMENDED DOSAGE 0.3-1.0% in lubricating oil. PACKING AND STORAGE Packing: 180kgs/drum, 200 L steel drum
