Sas 32p-4 sas 29p (sff-8484 to sas 8482)
Fiber optic splitters and couplers are used to split or combine optical signals in various kinds of networks Common applications of splitters and coupler are: system monitoring, fiber to the home, network redundancy, laser splitting Features: Single and multiples mode are available Industry standard and custom housing available Variety of connectors available 1 x 2, 1 x 4 and 1 x n custom couplers configurations available Low insertion loss Environmentally stable Specifications: Operation wavelength: 850nm or 1,310nm or 1,550nm, others on request Thermal stability: í_0.1dB over -10 to 85íµ Operating temperature: -10 to 85íµ/-20 to 70íµ/-20 to 70íµ Applications: Optical communication system Optical testing system Optical fiber sensor Optical power distributor
Feather: Low insertion loss High return loss High stability and reliability Customer design available Applications: Collimator Splitter Awg Wdm Isolator Active device As per customers' requirement
Optical filter
Color tmeperature conversion filters are used to balance the color temperature of a light source. They will balance tungsten light source to daylight or vice versa, providing significant changes in color temperature. These filters can also be used to create an intertional warm or cool effect.
Optical low pass filter (OLPF) is used in high end (high resolution) digital camera sensor to eliminate interference influence (Moire pattern) by crystalline birefringency. An OLPF can cut off the undesired high spatial frequency when the sensor resulting the image. IR cut-off function is often incorporated into OLPF as well. Some use absorptive blue glass + AR , or direct coating an IR cut thin films layers .
The ir pass filter (infrared pass filters) that operates over a very wide temperature range to reflect the entire visible light spectrum while very efficiently transmitting infrared wavelengths. So that can increase the temperature of bathroom.
Conversion color temperature filters
1) HDMI to HDMI 2) Metal Shell 3)100% Triple Shield 4)Oxygen Free Copper Conductor 5)24K Gold Plated 6)Support 1080p OPP BAG
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
í= Applications: Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable, it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between floors. í= Installations: Installed along the wall, the roof, interlayer, canal and indoor. í= Construction: The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central element made of 3 sub-units. í=Technical Parameters: íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode) íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation) íe Minimum Bending Radius: Short Term Installation: 20 x Overall Diameter Long Term Installation: 10 x Overall Diameter (Non-Armoured); 20 x Overall Diameter (Armoured) íe Twist (Torsion Length): 125 x Overall Diameter. íe Working Temperature: -10íµ ~ +70íµ (PE sheath) íe Storage Temperature: -20íµ ~ +70íµ (PE sheath) í= Product Highlights: íe Small diameter and light weight. íe The high tension characteristics of the aramid yarn serving as strength member can offer good stability in the transmission performance. íe Compact and flexible construction are especially suitable for indoor installations. íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved with excellent strip ability. íe LSZH jackets can be offered for indoor application for which flame retardancy is required. íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation within the operating temperature range. íe Fiber geometry are strictly monitored to ensure superior transmission performance. roll,box,drum
Applications: 10base-t, 100base-t4, 100base-tx, 100base-vg-anylan, 155mbps atm, 622mbps atm Working frequency: 1-100mhz Technical parameters: Characteristic impedance: 100ía15ª+ Nominal velocity of propagation(nvp): 69% Maximum dc resistance: 9.38ª+/100m Maximum mutual capacitance: 5.6 nf/100m Maximum capacitance unbalance: 330 pf/100m Maximum resistance unbalance: 5% Maximum propagation delay skew: 30 ns/100m Maximum propagation delay: 536 ns/100m 100 mhz Minimum bending radius: 10 x overall diameter Voltage rating: 60v rms Maximum pulling load: 80n Working temperature: -20 íµ ~ +60íµ Storage temperature: -5íµ ~ + 50íµ Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1 (frpvc & lszh jacket); iec 60332-1 & iec 60332-3c (lsfroh jacket) Product highlights: Provide excellent bandwidth beyond 100 mhz. Designed for use in data and voice backbone application. Meet the strict flame retardancy and environmental requirements in europe and us. Easily identifiable color code for ease of installation. Transmission properties: Freq: 100 (mhz) Roll, box, drum
Optic fiber adapter - LC are all plastic housing; There are simplex LC adapter and duplex LC adapter, usually duplex LC fiber adapter are with SC footprint. The LC fiber adapter colors are same as SC fiber optic adapter: Blue for single mode PC, beige for multi mode PC and green for single mode APC. LC fiber optic adapter are with bronze sleeve for multimode and zircon sleeve for single mode. Features: 1. Standard metal one-piece body, good interchangeability 2. Precision ceramic sleeve, low insertion loss 1. Applicable standard: YD/T826, YD/T896, IEC61754-13 Applications: 1. Optical fiber communication networks 2. Optical CATV 3. Instruments and meters
Fiber optic Patchcord - LC is a small scaleization, demand but development that high thickness joins one kind of new connection box in order to meet client. It compresses in the entire electric network plank and room that wall plank and the flexibility cabinet needs, causes such the person who possess room merely considerably traditional ST and SC connection box in part. Intelligently the bright and beautiful corporation adopts well-developed technique and installation, and carrying on scale manufacture, the produce performance is good, and the quality is steady dependable. Distinguishing feature 1. The bulk is little, the dimensions accuracy is high 2.1.25mm the ceramics is trusted the rush pith 3. The insertion loss lets drop 4. Echo return loss is high 5. Two kinds of compositions in the single rush pith and twin rushes pith may feed the selection 6. Accord with IE874's criterion Application 1. Telecommunications and data news dispatch 2. Local area network (LAN) 3. Vast domain net (WAN) 4. Installation terminal end
Fc fiber patch cord We provide st optical fiber patch cord, fc fiber optical patch cord, sc optical fiber patch cord, fddi fiber optical patch cords, escon optical fiber patch cords, lc fiber optical patch cord, mtrj fiber optic patch cord, and mu optical fiber patch cord. They are according to the ultra-polished (upc), angle-polished (apc) or other polish requirements. Pc, upc or apc polishing Single mode fiber: itu - t g. 652 b/d Multi mode fiber: itu - t g. 651 Standard: telcordia gr-326-core Standard housing, ceramic ferrule Fiber cable diameter: 2.0mm or 3.0mm or 0.9mm Fiber diameter: 9/125m, 62.5/125m or 50/125m or 10g Simplex, duplex, multi-bundle fiber or customized optional Insertion loss: (sm)pc 0.3 db, upc 0.2 db apc 0.2 db (mm) pc0.3db Return loss: sm (pc) 50db(upc) 60db mm 35db Mechanical endurance(1000t): 0.2db Exchangeability: 0.2db Vibration: 0.2db Operating temperature: -40c~+80c Storage temperature: -45c~+85c 2. Features Realized the active link of optical fiber transmission Low insertion loss and high reture loss Excellent repeatability and interchangeability 3. Application Catv Lan, access network Telecom, gigabit data network Testing and medical equipment Industry and military application
Mfoc íªs sm and mm attenuators can be applied to adjust the power levels of signals in optical communications at the output of light sources, e/o converters and for testing the linearity or dynamic range of optical power meters.
Insertion loss (dB) í- 0.2 Return loss(dB) UPCí+ APC50 í+ MM/PC60 í+ 35 Repeatability (dB) í- 0.1 Oprerating temperature (¿¼ C) -20-+60 Storage temperature (¿¼ C) -40-+85 Interchangeability (dB) í- 0.2
Pc, upc, apc multi skive project High return loss Low insertion loss High reliability and stability Available for both sm, mm, simplex and duplex 0.9mm, 2.0mm, 3.0mm cable diameter option
Pc, upc, apc multi skive project High return loss Low insertion loss High reliability and stability Available for both sm, mm, simplex and duplex 0.9mm, 2.0mm, 3.0mm cable diameter option
Optic cable
