Manta G700 is a blend of high molecular weight silicone elastomer and cyclic siloxane. It is a translucent silicone elastomer gel. The nature of its gel determines that this product cannot really dissolve in anything. In the oil phase, it can only exist in a stably dispersed form; this product can be used in a variety of cosmetic formulas such as water/oil emulsion, water/silicone oil emulsion, oil/water emulsion and anhydrous products to obtain dry, velvety smooth, Non-greasy skin feel.
WSD-302AB is two components of silicone adhesive , it is fast-cure type glue for cured silicone rubber bonding with cured silicone rubber at high temperature.
Silicone soft touch smooth feeling oil is also called silicone matting oil, silicone matte oil, etc. It is mainly used for coating silicone-based products. Because of silicone products molded out of the surface are rugged and wrinkled, feeling bad while touch it, generally by spraying soft touch smooth feeling oil to improve the silicone surface effect, make it have have a delicate and smooth feelings, and increase products additional value and selling point. Features: Soft touch smooth feeling, anti-sticking, Reduced friction,dust proof functions.
PTC-200A/B is a platinum catalytic vulcanizing agent for molding and hot air vulcanization of compounded silicone rubber, and the vulcanized products are odorless, non-toxic, and anti-yellowing. When used for molded products, it can achieve fast vulcanization at about 110-130â?? (measured mold temperature), and at the same time, it has a relatively long waiting time at room temperature after refining. platinum vulcanizing agent is really an effective alternative to the double two five vulcanizing agent, and more efficient, more environmentally friendly, saving the overall cost! Application products: silicone baby care products
C-20 anti-yellowing vulcanizing agent, is a mixture of peroxide and raw rubber carrier, also used in silicone products molding vulcanization process, used in high-quality products for long-term use, used for transparent, semi-transparent and white, semi-transparent color and other products to prevent yellowing phenomenon, in the transparent or white parts, to ensure that high temperature vulcanization for many times (or the second vulcanization of 200 â?? for about 4 hours of baking), the product does not turn yellow, applicable to the color of pieces of anti-yellowing, to ensure that the color of colored parts do not turn yellow after many times of vulcanization, as well as long-term use of the color does not change color!
C-14 odorless vulcanizing agent, with excellent dispersion, fast vulcanization speed and odorless vulcanized silicone products, is suitable for crosslinking of vinyl silicone rubber, polyethylene and ethylene propylene rubber. It is importantly used in food grade silicone products, kitchen products and baby products. Composition: Aã?? Silicone polymer Bã??Active peroxide C. Anti-yellowing agent Application products: silicone Kitchenwares, silicone household products
Liquid silicone colorant, is a new type of silicone colorant developed for liquid silicone, good compatibility with liquid silicone, good dispersion, strong coloring power, high temperature resistance, no migration, easy and convenient to add, in line with ROHS, REACH and other environmental requirements. Silicone color paste is widely used in liquid silicone injection extrusion and other processes of coloring. Features: It has the excellent qualities of heat resistance, light resistance, migration resistance, color separation resistance, easy out, acid and alkali resistance, strong coloring power, and high solid content.
Dear All We are fertilizer exporter from Uzbekistan. Now available sulfur for export. Any request please contact for more information.
We can provide Sulfur Granule from Indonesia. Purity 99.84% balance, Ash less then 0.01, Moisture 0.05%.
We are a factory specializing in the production of ferroalloys. We were established in 1997 and have been supplying ferroalloys to countries all over the world for a long time. We hope to communicate with you in detail.
Various models can be customized. High-carbon Silicon is Silicon with a larger carbon content. High-carbon silicon Iron is a new type of alloy used in converters. It can replace ferrosilicon, silicon carbide and carburizing agents, reduce the amount of deoxidizer, and is used in the deoxidation alloying process of converter smelting. The effect is stable, and the chemical composition, mechanical properties and internal quality of the steel are all uniform. Better than traditional craftsmanship. As a new type of strong composite deoxidizer, it can also be used for the tempering of general steel, alloy steel and special steel. In addition, as a temperature-raising agent, it can replace the more expensive traditional temperature-raising agent required in converter and open-hearth steelmaking.
Various models can be customized. Alloy silicon balls are commonly used silicon-based alloy additives in the alloy preparation process. They are usually in the form of spherical particles and consist of a high proportion of silicon elements. They can be used as deoxidizers and reducers. During the steelmaking process, alloy silicon balls react with oxygen, reducing it to gaseous form, thereby reducing the oxygen content and improving the purity and quality of the steel. The presence of silicon increases the hardness, strength, and wear resistance of the steel. By controlling the amount of alloy silicon balls added, specific performance requirements of the steel can be met. Additionally, the addition of alloy silicon balls can improve the fluidity and wetting ability of the steel, facilitating smooth operation and uniform distribution of the molten steel during the smelting process. Alloy silicon balls exhibit good thermal stability, allowing them to operate effectively in high-temperature environments. Their inclusion enhances smelting efficiency, reduces energy consumption, and lowers production costs, ultimately improving the efficiency and quality of steel production.
Various models can be customized 1. Silicon carbon can be used as metallurgical deoxidizer and high temperature resistant material in smelting. 2. Silicon carbide can also be used as abrasive, which can be used to manufacture abrasive tools, such as grinding wheels, oil stones, grinding heads, etc. 3. Silicon carbon is a new type of reinforced steelmaking deoxidizer and an ideal thermal insulator. It is used for deoxygenation. Using a dose of 14kg/t can reduce power consumption by 15-20kw/h and time by 15-20 minutes per furnace to increase productivity to 8-10%.
Various models of metal silicon can be customized 1. The main use of silicon metal is as an additive for non-ferrous alloys. 2. Alloying agent for demanding silicon steel. 3. Deoxidizer for smelting special steel grades and non-ferrous alloys 4. Silicon metal is a good component in aluminum alloys, and most cast aluminum alloys contain silicon.
1.Ferro silicon is often used as deoxidizer in steel making. 2.Ferro silicon also can be used as alloy elements join agent,which is widely used in low alloy steel,non-ferrous metal,bearing steel,heat-resistant steels and electrician silicon steel. 3.Ferro silicon commonly used as a reductant in ferroalloy production and chemical industry. 4.In iron industry,ferro silicon often used as inoculant and nodulizer and deoxidizer.
1.Ferro silicon is often used as deoxidizer in steel making. 2.Ferro silicon also can be used as alloy elements join agent,which is widely used in low alloy steel,non-ferrous metal,bearing steel,heat-resistant steels and electrician silicon steel. 3.Ferro silicon commonly used as a reductant in ferroalloy production and chemical industry. 4.In iron industry,ferro silicon often used as inoculant and nodulizer and deoxidizer.
Sulphur in Granular and Lumps forms
Sulphur in Granular and Lumps forms
We are selling Turkemnistan Origin lump granuulated suplhur 99.95% purity Turkmenistan standard TDS127.1-93 Packed in Big Bag -1 MT FOB Port Banderabas
* Owing to our massive and sophisticated infrastructural unit, we are highly dedicated in offering qualitative IBR Carbon Steel Forged Fitting. Our product range is procured in compliance with variegated demands and needs of our client base. * These products are also checked stringently by quality analysts to ensure that defect free and best quality products to our honored clients. The exclusive range carbon steel forged fittings is available in different dimensions and alloys. Standard : ASTM / ASME A105/ A105N/ A694 F42/46/52/56/60/65/70 / A350 LF3/ A350 LF2 Sizes : 1/2" TO 4" Pressure Rating : 2000#, 3000#, 6000#, 9000# Grade : F42 / F46 / F52 / F56 / F60 / F65 / F70 Range : 150#, 300#, 400#, 600#, 900#, 1500# & 2500#. Type : Socketweld Fittings, Threaded Fittings Form : Tee, Union, Full Coupling, Half Coupling,Elbow 45 Deg & 90 Deg, Swage Nipple, Cross, Cap, Plug Bush
