Hollow sucker rod
Molybdenum rod
Self-controlled electrical heating sucker rod is a new generation of electric heating rod of the latest products. The product has high heat productivity, and its temperature is self-controlled. Polymer PTC (positive temperature coefficient of resistance) will be installed within the hollow rod as the semiconductor material thermal heating elements. Both ends (male and female) are sealed by fire resistant PTFE material. The temperature of this kind sucker rod can be adjusted according to the complexity of current automatically. Within the entire pitshaft oils temperature is uniform, which saves energy without destroying oil properties. The rod is designed sectional. There is a fuse in every installation of rods, which can protect it in the case of partial flow. Without prejudice to the overall work.
Connecting rod
Technical specifications: Contact rating : 230 v, 20 amps(can be modified as per customer's requirement). Temperature range :as per customer's requirment Tolerance on operating temperature : within +T-ª6 +T-ªc Maximum differential temperature : 10 +T-ªc. Insulation level : 1.0 kv for 1 minute. Stem lengths available : as per requirment Contact configuration : opening on temperature rise Details: Every thermostat is individually checked for quality & performance before despatch to ensure zero rejection. As per customer's requirment
Wire rod : 5, 5-14, 0 mm. Packing: in coils of 1100-1500 kg, 1500-2100 kg. The height of a coil is up to 1500 mm, 1750 mm; od - 1250 mm; id - 850 mm. Binding with wire rods diam. 5, 5-7, 0 mm: 4 radial bindings and 1 transverse binding. Wire rod + mm as per gost 30136-95 can be also packed in coils up to 550 kg. Dimensions of a coil: height up to 400 mm; od - 1400-1450 mm; id - 850-900 mm. Binding at 2 places. The wire rod is produced according to the following standarts: Wire rod of carbon steel of ordinary quality as per gost 30136-95 (dstu 2770-94); Steel grade as pergost 380-94 Mass fraction of elements, % C Mn Si S P Cr Ni Cu Steel grade Mechanical properties Ultimate tensilestrength, n/mm2, max Relative contraction, %, min Mass of scale, kg/t, min 1kp 430* 66 10 3kp/ps 540 60 10 Wire rod of low carbon and alloyed steel as per tu 14-15-345-94 (for manufacturing welding wire). Steel grade Mass fraction of elements, % C Mn Si S P Cr Ni Al Max Max Max Max Max Max Max Sv 08 0, 10 0, 35-0, 60 0, 03 0, 04 0, 04 0, 15 0, 30 0, 01 Sv 08a 0, 10 0, 35-0, 60 0, 03 0, 03 0, 03 0, 12 0, 25 0, 01 Steel grade Mechanical properties Ultimate tensilestrength, n/mm2, max Relative contraction, %, min Mass of scale, kg/t, max Sv 08, sv 08a 420 60 10 Wire rod as per american standard astm a 510m.
Heavy duty tie rod kids The maximum angles for the rod heads are 60 (by the specific material )with high precision and specially treat ( seal not necessary )
1.Rod end. 2.Link ball. 3.Spherical bearings. And we can manufacture all kinds of rod ends.
Drill bits
Diameter: 32mm---42mm Shank: 108mm*22mm Effective length: 0.4m---3m
Tapered rods
Beam-pumping units Pumping Unit Rated Load of Suspension Point kN Max Stroke of Polished Rod m Rated Torque of Decelerator kN.m (kgf.m) 8-3.0-37 80(8) 3.037(3700) 10-3-53100(10)3.053(5300) 12-4.2-73120(12)4.273(7300) 12-4.8-734.8
Beam-pumping units Pumping Unit Rated Load of Suspension Point kN(tf) Max Stroke of Polished Rod m Rated Torque of Decelerator kN.m (kgf.m) 8-3.0-37 80 (8) 3.0 37(3700) 10-3-53 100(10) 3.0 53 (5300) 12-4.2-73 120(12) 4.2 73(7300) 12-4.8-73 4.8
Spec:115-290cm Capacity:30kgs 1pc/box, 10pcs/ctn, measurement:116.5x23x32.5cm
Extension support rod Capacity:30kgs Spec:115-290cm 1pc/box, 10pcs/ctn, meas:116.5x23x32.5cm
Connecting rod
Acrylic rods
Rectangle bar or with bevel bar of tungsten carbide Neutral packing
Tungsten carbide cylinder According to customer's opinion and neutral packing.
Vibration Damper/ Armour Rod Vibration Damper Armour Rod Preformed Cable Fittings 1. Usage and characteristics 4D Vibration damper is composed of two different weight hammers stranded galvanization steel wire with high elasticity and high-intensity, and aluminum alloy clamp. The 4D series Vibration dampers we provided are Stock-bridge Tuning Fork, with four resonant frequencies, the frequency range is from 3Hz to 150Hz. with wide frequency range, the 4D vibration damper can highly consume vibration energy, and effectively dissipate the energy caused by cable Aeolian vibration, reduce cable vibration horizontal, extend the cable service life. Vibration Damper can be installed on both OPGW and ADSS cable. Armor rods are needed when it is installed on OPGW and ADSS cable. Armor rods are also called Vibration damper hyperactive rods. Because of the concentrated stress, vibration damper will cause some damages to the cable. the armor rods provide proper stress distribution on the optical cable and protect the cable. 2. Product Specification Model Clamp Dia.Range(mm) Min.(mm) Max.(mm) 4D-20-14.0 12.2 14.0 4D-20-16.0 14.0 16.0 4D-20-18.0 15.0 18.0 4D-20-20.3 16.5 20.3 4D-20-23.4 19.5 23.4 4D-20-27.0 22.3 27.0 4D-30-14.0 12.2 14.0 4D-30-16.0 14.0 16.0 4D-30-18.0 15.0 18.0 4D-30-20.3 16.5 20.3 4D-30-23.4 19.5 23.4 4D-30-27.0 22.3 27.0 3.Packing/shipping/Terms of Payment Packaging: preformed guy grip according to the concrete product cartons, wooden cases(as customer's requirements) Delivery: usually, it will take about two weeks for the order of 10000sets for production Terms of Payment: By T/T 4. The product is also named what in form as follows: Preformedhelicalfittingsaluminiumstockbridge CableStockbridgedamper cablefittingstockbridgedamper
