1.Ammonium chloride is a kind of neutral fertilizer were widely used for most crops like rice, corn, sorghum, wheat, cotton, vegetables, and other crops 2.The nitrification rate is slow, not easy loss, fertilizer efficiency long, ,high effective utilization rate of nitrogen 3.To reduce crop lodging, rice blast, bacterial blight, root rot and other disease occurrence
Chlorinated Polyethylene is used for plastic and rubber products, it is used as impact modifier in pvc products, such as pvc profile, pvc pipe ect. It can improve the physical properties of pvc products. And it is also used to produce rubber products.
The ion exchange method for chromium removal has good practical performance, low cost, convenient operation, simple equipment, good water quality, stable performance, and easy recycling. The efficiency is high, and chromium and water can be recovered and reused. Compared with the traditional method, the amount of sludge is reduced by about 80%, and the discharge standard can be met. a special ion exchange resin for chromium removal. It has high exchange capacity, strong regeneration capacity and good mechanical strength. It is widely used in the removal of chromium from wastewater
A catalyst is a chemical substance that increases the rate of a chemical reaction without being consumed in the process. Catalysts work by providing an alternative reaction pathway that requires less energy than the uncatalyzed reaction, which makes it easier for the reactants to form the desired product. Catalysts are used in a wide range of chemical processes, including the production of fuels, plastics. Auxiliaries, also known as auxiliary agents or chemical additives, are substances that are used in conjunction with catalysts to improve the performance of a chemical reaction. Auxiliaries can improve the selectivity of a catalyst, which means that they can help to direct the reaction towards the formation of a specific product. They can also improve the stability of a catalyst, which means that they can help to prevent the deactivation of the catalyst during the reaction. Auxiliaries are used in many industrial processes, including the production of petrochemicals, fine chemicals, and polymers.
Introduction Sodium lignosulphonate is an anionic surfactant. It is a reaction product of wood pulp and sulfur dichloride aqueous solution and sulfite. It is a by-product of pulp production. Specifications Appearance : Yellow Brown Powder PH value : 12-14 Solid content 93% Lignin content 55% Application 1. In construction industry.it can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. 2. In the briquetting procedure,it can be adopted as the adhesives. 3. In the fields of pottery and porcelain and refractory materials,it can be used as embryo reinforcing agents. It can increase the fluidity of the slurry and thus to improve the strength of the embryo. 4. In the field of water-coal paste, it can be adopted as the main compound materials. 5. In agriculture, it can be applied as the dispersant agents of pesticides and pelleting adhesives of friliers and feedstufs. 6. In leather industry,it can be used as tanning agent. 7. In dye,it can be used a fling agent and dispersant of vat dye and disperse dye. 8. In the boiler,it can be used a scale remover.
Introduction Sodium lignosulphonate is an anionic surfactant. It is a reaction product of wood pulp and sulfur dichloride aqueous solution and sulfite. It is a by-product of pulp production. Specifications Appearance : Yellow Brown Powder PH value : 12-14 Solid content 93% Lignin content 55% Application 1. In construction industry.it can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. 2. In the briquetting procedure,it can be adopted as the adhesives. 3. In the fields of pottery and porcelain and refractory materials,it can be used as embryo reinforcing agents. It can increase the fluidity of the slurry and thus to improve the strength of the embryo. 4. In the field of water-coal paste, it can be adopted as the main compound materials. 5. In agriculture, it can be applied as the dispersant agents of pesticides and pelleting adhesives of friliers and feedstufs. 6. In leather industry,it can be used as tanning agent. 7. In dye,it can be used a fling agent and dispersant of vat dye and disperse dye. 8. In the boiler,it can be used a scale remover.
Introduction Sodium lignosulphonate is an anionic surfactant. It is a reaction product of wood pulp and sulfur dichloride aqueous solution and sulfite. It is a by-product of pulp production. Specifications Appearance : Yellow Brown Powder PH value : 12-14 Solid content 93% Lignin content 55% Application 1. In construction industry.it can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. 2. In the briquetting procedure,it can be adopted as the adhesives. 3. In the fields of pottery and porcelain and refractory materials,it can be used as embryo reinforcing agents. It can increase the fluidity of the slurry and thus to improve the strength of the embryo. 4. In the field of water-coal paste, it can be adopted as the main compound materials. 5. In agriculture, it can be applied as the dispersant agents of pesticides and pelleting adhesives of friliers and feedstufs. 6. In leather industry,it can be used as tanning agent. 7. In dye,it can be used a fling agent and dispersant of vat dye and disperse dye. 8. In the boiler,it can be used a scale remover.
Specifications: Total Acidity as HCOOH 85 % by mass min. Water Rest Total Insoluble Matter To pass the test Heavy Metals as Pb 20 ppm max. Chlorides as Cl 0.005% max. by mass Non Volatile Matter 0.08% max. by mass Sulphate as SO4 0.005% max. by weight Iron as Fe 50 ppm max. Boiling Point 107 C Melting Point 15 C Specific Gravity 1.192 at 25 C CAS No. 64-18-6 UN No. 1779 Uses: Used as a coagulant for obtaining rubber from latex. As an auxiliary for delining and pickling of fur, fixing of dyes-in leather industry and in processing in textile industry.- As an intermediate in manufacturing of basic drugs, plant protection agents, pesticides, vulcanisation accelerators, antioxidants and cleaning agents. Used in preservation of silage and grams. Used in electroplating and as a solvent as well. Packaging and Supply:- Available in 35 kg HDPE carboys. All the packings are UN/IMDG approved.
Rhenium Extraction resin Rhenium is a precious rare metal, which is widely used in scientific research and modern industry. Rhenium is mostly associated in metallic minerals, and the content is very low. The particularity of the distribution of scattered metals makes it difficult to extract and recover them. Extraction of rhenium by ion exchange is a simple and efficient method. The rhenium extraction resin provided by has the advantages of good stability, convenient separation, large exchange capacity, high mechanical strength, and reusability, and is widely praised by customers.
Calcium and Magnesium removal ion exchange resin from lithium solution Salt lake brine contains trace amounts of calcium and magnesium ions. In order to purify lithium solution, calcium and magnesium ions need to be removed. The removal of calcium and magnesium ions by ion exchange resin is a simple and effective method. The operation is simple, the resin may be regenerated, and it has high economic benefits
Lithium adsorption Material lithium resin is a specially designed and synthesized lithium ion screen. Based on the small radius of lithium ions, the special pore structure of the extraction agent can make lithium ions enter the crystal layer, but magnesium, sodium and calcium plasma can not enter, so as to achieve the efficient selective adsorption of lithium ions. The adsorption, desorption and regeneration of lithium extraction agent are carried out at room temperature. For ph5.5-7, the ratio of magnesium to lithium is tens to hundreds. Lithium content in dozens to hundreds of PPM brine has excellent adsorption separation effect
Nickel extraction resin In the process of nickel production and nickel electroplating, nickel-extracting resin will produce a large amount of low-concentration nickel sulfate solution, generally containing Ni2+ is 1~10 g/L, and the amount of wastewater discharge is large. If it is discharged directly without recycling, it will not only cause resources waste and pollute the environment. Ion exchange technology is widely used due to its advantages of good effluent quality, recovery of useful substances, and suitable for treating nickel-plating wastewater with low concentration and large amount of wastewater. Professional Nickel Extraction Resin has the characteristics of high mechanical strength, easy analysis and regeneration, and long service life.
Hastelloy C-276 Alloys Chemical Composition is C -0.010 max ,Mn - 1.00 max,Si- 0.08 max, S-0.03 max, Co- 2.50 max, Ni-50.99 min, Cr-14.50 - 16.50, Fe- 4.00 - 7.00, Mo- 15.00 - 17.00, P- 0.04 max. Benefits of Hastelloy C-276 Alloys Hastelloy C-276 Alloy has excellent resistance to a wide variety of chemical process environments, including: Strong oxidizers (such as ferric and cupric chlorides) Hot contaminated media (organic and inorganic) Chlorine Formic and acetic acids Acetic anhydride
Synonym: OH-terminated polydimethylsiloxane, -Dihydroxy Polydimethylsiloxane Cas no: 70131-67-8 Appearance: Colorless Transparent Liquid Product Features: 1. High and low temperature resistance 2. High flash point 3. Low freezing point (it can be chronically used in the temperature from 50 to 250 ) 4. Small viscosity-temperature coefficient 5. Big compression ratio and low surface tendency 6. Water-repellent and moisture resistant Appilication: Low viscosity hydroxy silicone oil can be used as a processing aid for silicone rubber. It can be used as an anti-structural control agent to improve the processing properties of silicone rubber. It can also be used as a fabric post-treatment agent to improve the smoothness and sewing of polyester threads, make fabric soft, smooth and elastic. At the same time, it can be used as a release treatment for high-grade paper, leather brighteners, mold release agents, etc.
Chlorine dioxide (Clo2) has been described as the ideal biocide. it is a powerful oxidizing agent, Chlorine dioxide is very effective in killing pathogens such as funguses, mold, algae, bacteria and viruses. It kills micro-organisms by attacking and penetrating their cell wall, disrupting the transport of nutrients across the cell wall and inhibiting protein synthesis. it is widely used in water treatment, aquaculture, food processing, odor removal and other industrial operations. Itâ??s now included in many drinking water hygiene programs around the globe. Product: Chlorine dioxide-0.5 GRAM TAB Perfect for dropping in a spray bottle for surface disinfection, or in an open container for deodorizing and air decontamination, on demand for small to medium scale application. Package: 6 tablets/sheet Features Chlorine dioxide generating is more than 10% Very rapidly an active chlorine dioxide solution on site. The chlorine dioxide solution has a long shelf life of 30-60 days.
Dispersant MF,with excellent diffusion and thermal stability, non-permeability and non-foaming,it can be used with anionic and non-ionic surfactants. 1. In construction industry.it can be applied as common water reducing admixture and built material of series multifunction high-performance water reducing admixtures. 2. In the briquetting procedure,it can be adopted as the adhesives. 3. In the fields of pottery and porcelain and refractory materials,it can be used as embryo reinforcing agents. It can increase the fluidity of the slurry and thus to improve the strength of the embryo. 4. In the field of water-coal paste, it can be adopted as the main compound materials. 5. In agriculture, it can be applied as the dispersant agents of pesticides and pelleting adhesives of frtilizers and feedstuffs. 6. In leather industry,it can be used as tanning agent. 7. In dye,it can be used a flling agent and dispersant of vat dye and disperse dye. 8. In the boiler,it can be used a scale remover.
FUSO is the LARGEST MALIC ACID MANUFACTURER OF WORLD and is found The Best Malic acid in World used by fortune 500 companies of world. is the exclusive and only distribution partner for FUSO MALIC ACID We supply our Fuso malic acid to 500 companies in including top 10. (For example :- ITC, Dabur, Parle Agro and IFF) Use Malic acid with combination of Citric acid to enhance flavors in your beverages, confectionary, Bakery, supplements, functional foods etc Malic acid used with the combination of citric acid (as citric acid only gives sour taste and malic gives mellow pleasant taste with long lasting flavor) or can be used without Citric Acid. Malic acid is widely used as an acidulant and/or flavor enhancer in Carbonated drinks, non -carbonated drinks, Snacks products, Confectionary, Bakery, Seasoning, Flavor, Instant Mix, sauce, Pickles, ORS Supplements, Dairy Division - whey protein cheese, Fermented milk, Pharmaceuticals - cough syrup, Effervescent tablet, ORS, lozenges, cough syrup. toothpaste etc. FUSO MALIC ACID is also used in Cosmetics Products as AHA such as Shampoo, Anti-aging cream body lotions, and serums etc
LARGEST MALIC ACID MANUFACTURER OF WORLD and is found The Best Malic acid in World used by fortune companies of world. is the exclusive and only distribution partner for FUSO MALIC ACID , We supply our Fuso malic acid to Use Malic acid with combination of Citric acid to enhance flavors in your beverages, confectionary, Bakery, supplements, functional foods etc Malic acid used with the combination of citric acid (as citric acid only gives sour taste and malic gives mellow pleasant taste with long lasting flavor) or can be used without Citric Acid. Malic acid is widely used as an acidulant and/or flavor enhancer in Carbonated drinks, non -carbonated drinks, Snacks products, Confectionary, Bakery, Seasoning, Flavor, Instant Mix, sauce, Pickles, ORS Supplements, Dairy Division - whey protein cheese, Fermented milk, Pharmaceuticals - cough syrup, Effervescent tablet, ORS, lozenges, cough syrup. toothpaste etc. FUSO MALIC ACID is also used in Cosmetics Products as AHA such as Shampoo, Anti-aging cream body lotions, and serums etc
ACP-105 899821-23-9
Chemical Name: N-Cyclohexyl-2-benzothiazole sulfenamide Properties: Gray-white powder(granule).A slight odor. Specific gravity: 1.31--1.34. Soluble in benzene, chloroform, carbon disulfide; Insoluble in water. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone, when activated by Accelerator DPG, Accelerator TMTD and Accelerator TMTM. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 1 years when stored under normal conditions.
