Hammer mill crusher Application Hammer mill crusher is suitable for mid-hard and light erosive Materials, whose pressureresistance strength is no more than 100Mpa and humidity lower than 15%, suchas coal, salt, chalk, gypsum, blocks, lime Stone, etc. Hammer mill crusher Operating Principle The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw Materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammerto small size. There is a screening plate under the rotor, so that Materials with size smaller than the screen mesh will be screened out and others are left tobe further hammered and ground until reach the st and ard size. The size of the final product can be adjusted by changing the screening plate. The gap between therotors and the screening plate can also be adjusted according to different requirement. Hammer Mill Design The major components of hammer mill, shown in the picture, include: - a delivery device is used to introduce the material to be ground into the path of the hammers. A rotor comprised of a series of machined disks mounted on the horizontal shaft performs this task. - free-swinging hammer that is suspended from rods running parallel to the shaft and through the rotor disks. The hammer carries out the function of smashing the ingredients in order to reduce their particle size. - a perforated screen and either gravity- or air-assisted removal of ground product. Acts to screen the particle size of the hammer mill to ensure particles meet a specified maximum mesh size. Feeder Design Materials are introduced into the paths of the hammers by a variable speed vein feeder. This type of feeder can have its motor slaved by a programmable controller to the main drive motor of the hammer mill. The operational speed of the feeder is controlled to maintain optimum amperage loading of the main motor. Screen Design The amount of open area in hammer mills screen determines the particle size and grinding efficiency. The screen must be designed to maintain its integrity and provide the greatest amount of open area. Screen openings (holes) that are aligned in a 60-degree staggered pattern optimize open area while maintaining screen strength. This method will result in a 40 percent open area using 3.2 mm (1/8 inch) holes aligned on 4.8 mm (3/16 inch) centers. Read more: evelyn@cncharcoalmachine.com
Multi Span Greenhouse (CMR5030) Width:6.0m-8.0m*n Length:4.0m*n, Apex Height:2.5m-4.5m Wall Height:1.8m-2.5m Cladding�Poly Film, Pipe Diameter�Φ32,�50*50*1.5 Advantage High quality steel structure and long service life, The frame works structure is assembled by prefabricated parts, All the greenhouses we designed are easy&quick to be installed and dismantled.No welding involved,all connected by clips and clamps,bolts and screw,slot and springs, The most economical greenhouse for large growers, Optional systems are available for agriculture usage greenhouse: Internal shade system or exterior shade system Cooling and heating system Irrigation system Side Ventilation and roof ventilation(with manual or automatic open-close operation control system is optional ) Hydroponic system
Greenhouse for vegetable (CMB4020) Width:8.0m,9.0m*n Length:20m-100m Apex Height:4.5m-6.0m Wall Height:2.5m-4.5m Cladding:Poly Film Pipe Diameter:Φ40,Φ48,Φ60 Advantage High quality steel structure and long service life, The frame works structure is assembled by prefabricated parts, All the greenhouses we designed are easy&quick to be installed and dismantled.No welding involved,all connected by clips and clamps,bolts and screw,slot and springs, The most economical greenhouse for large growers, Optional systems are available for agriculture usage greenhouse: Cooling and heating system Irrigation system Side Ventilation and roof ventilation
Hydroponic System Hydroponic is a subset of hydroculture and is a method of growing plants using mineral nutrient solution without soil. Terrestrial plants may be grown with their roots in the mineral nutrient solution only or in an medium, such as perlite, gravel, mineral wool, expanded clay pebbles or coconut husk. Advantage: Suitable for vegetable, lettuce or flower, etc. Save the land, no soil is needed for hydroponics All the growing conditions can be controlled with hydroponics system Stable and high productivity with NFT channel Environment friendly. Plants grow healthier and easy to harvest
We are leading manufacturer and supplier of milling vice at all over india level from last 15 years and now we start our export at world wide.
We are manufacturing different types of vice from last 15 years and distributed it national level but now we start our export at worldwide.
Multi Span Greenhouse (CMB1230) Width:9.0m,8.0m*n Length:20m-100m Apex Height:4.5m-6.0m Wall Height:2.5m-4.5m Claddingï¼?Poly Film, Pipe Diameterï32,â?¡80*60*1.5 Advantage High quality steel structure and long service life, The frame works structure is assembled by prefabricated parts, All the greenhouses we designed are easy&quick to be installed and dismantled.No welding involved,all connected by clips and clamps,bolts and screw,slot and springs, The most economical greenhouse for large growers, Optional systems are available for agriculture usage greenhouse: Internal shade system or exterior shade system Cooling and heating system Irrigation system Side Ventilation and roof ventilation(with manual or automatic open-close operation control system is optional ) Hydroponic system
Pruducts Name :MESP-09 End mill Group of Product :Milling Cutter:Indexable End Mill Place of Origin :China Brand Name :HAFFMAN Typ :MESP-09 Material :SC Insert and Holder Diameter :20-40 Category :End mill Coating :TIN Length L :120-160 Nummber of Inserts Z :2 to 4 Cutting length L1 :40-80 Diameter of Shank d :25-40 angle of insert :90° Innnen cooling :upon inqiury length of insert a :9 Typ of inserts :SPMW09T308,SPMT09T308-M Finishing :Yes Rouging :Yes Stock :on Stock
HongSheng Saws Manufacturing band saw blade is made of superior material with excellent technology. Our heat treatment technology ensures excellent flatness, stable straightness, homogenous surface, and reduces machining time remarkably. In order to meet sophisticated and diversified customer needs, we provide our customers a variety of sizes, tooth profiles with prompt delivery. Condition of supply & treatment of saw blades: 1- setting teeth left and right 2- teeth point hardening 3- welded in loops / endless 4- packed in coils (100 meters per coil)
HongSheng Saws Manufacturing band saw blade is made of superior material with excellent technology. Our heat treatment technology ensures excellent flatness, stable straightness, homogenous surface, and reduces machining time remarkably. In order to meet sophisticated and diversified customer needs, we provide our customers a variety of sizes, tooth profiles with prompt delivery. Condition of supply & treatment of saw blades: 1- setting teeth left and right 2- teeth point hardening 3- welded in loops / endless 4- packed in coils (100 meters per coil)
1.Sand Mill for Dyestuff instruction:The sand mill for dyestuff is a horizontal sander.Horizontal sand mill is a high-efficiency wet superfine grinding and dispersing machine widely used in non-metallic mineral industry such as paint,Website:http://www.sfjxsandmill.com, dye, paint, ink, medicine, magnetic powder, ferrite, photographic film, pesticide, paper-making and cosmetics. The horizontal sand mill can be divided into ordinary horizontal sand mill, wheel pin horizontal sand mill, toothed disc horizontal sand mill and turbine horizontal sand mill according to different structures.2.Features:The sand mill for dyestuff has advanced design concept and closed continuous production, which can make the production process environmentally friendly. The product has fine grinding, uniform fineness, good quality and high production efficiency. The material is produced in a closed state, which effectively prevents the dry crust and solvent evaporation of the material. Double mechanical seal, double protection, zero leakage. The new dynamic separation structure makes the discharge more smooth and less wearing parts.3.Specifications:ModelSW-15SW-30SW-50SW-100SW-200Volume(L)153050100200Beads(mm)0.8~2.50.8~2.50.8~2.50.8~2.50.8~2.5Motor Power(kw)1518.5304575Weight(kg)85010501350195022404. Product Advantage:�Dynamic gap is made of special alloy steel and it is self-cleaning, non-clogging, abrasion-resisting.�The sand mill for dyestuff is made of a mechanical seal made by the world-leading BORGMANN company. The surface of the moving and static rings is made of silicon carbide, and the O-type ring uses PTFE to withstand the corrosion of highly corrosive solvents.�In order to solve the special requirements of users, the  sand mill for dyestuff is optional for several materials, such as zirconia, composite materials, which have lots of excellent characteristic such as resistant to solvent, zero pollution, highly wear resistance.5.FAQ: Q1. What is your terms of packing?A: Generally, we pack our goods in plywood cases. Q2. What is your terms of delivery?A: EXW, FOB, CFR, CIF.Q3. Can you produce according to the samples?A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.Q4: How do you make our business long-term and good relationship?A: We keep good quality and competitive price to ensure our customers benefit;6.Our Company:The company covers an area of about 15,000 square meters, and the plant area is about 8,000 square meters. The annual production capacity of the company is over 30 million. In terms of delivery, the production is started after the deposit is paid. The production time is determined by the number of equipment. After the completion of the payment, the goods are delivered after delivery, and the delivery is generally completed within 30-40 days.In the country and the well-known Nippon, three tree paint, Bardez paint, etc., have a long-term cooperative relationship.
Single Shaft Shredder In Zibo United Tech Machinery Co., Ltd. - Introduction: Single shaft shredder is available to recycle wide range of material. It is an ideal machine for plastic, paper, wood, fiber, rubber, organic waste a wide variety of non-metallic materials. As per our customerâ??s requirements, such as the input size of materials. Capacity and the final output size etc. We could work out a suitable proposal for our clients. After being shredder by the machine, the output material could be used directly or go int to the next step of size reduction. -
Oil sluge Shredder/Oil sluge bags shredder machine/Oil sluge recycling machine : The Oil Sluge Shredder/Oil sluge bags shredder machine/Oil sluge bags recycling machine have been design for a wide array of applications and industries, suitable for shredding solid material such as car tire, truck tire, e-waste, metal, wood,plastic, scrap tires, packaging barrel, pallets, etc. Depending on input material and the following process the shredded material can be used directly or go into the next step of size reduction. It is widely used in industry waste recycling, medical recycling, electronic recycling, pallet recycling, municipal solid waste recycling, plastic recycling, tire recycling, papermaking industry and etc. -
Double shaft shredder have been designed for a wide array of applications and industries,suitable for shredding solid material such as E-waste, metal, wood, plastic, scrap tires, packaging barrel. Pallets, etc.And particularly well suited to the size reduction of bulky or voluminous materials which could include contamination such as metals or stones. Depending on input material and the following process the shredded material can be used directly or go into the next step of size reduction. It can efficient to increase the bulk density and decrease the transportation cost. Zibo United Tech Machinery Co., ltd. It is widely used in industry waste recycling, medical recycling, electronic recycling, pallet recycling, municipal solid waste recycling, plastic recycling, tire recycling, paper making industry, etc. -
Double Shaft Shredder has two rotors built into the machine that rotate at low speeds, high torque and low noise. With the function of microcomputer control system, it is possible to control automatically start, stop. Automatic reverse sensors to protect the machine against over loading and jamming. -
A type keg spearWith safety latch/Without safety latchThread: 2"-14TPISealing material: EPDMSupply Ability: 10000Pieces per DayPayment Terms: L/C,Website:http://www.hibro-kegspear.com, D/P, T/T, Western UnionPackaging Details: Carton&PalletDelivery Detail: 30-45 daysOur Advantages:1Food grade, we had passed SGS, FDA certification.2Smooth appearance without scratch and burrs3Less foam, quick to fill, easy to clean and long life4Providing any length6First spears in China and world top37Real manufacture since 1993 Our products are widely exported to many countries, such as:USA, England, France, Germany, Belgium, Australia, New Zealand, Brazil, Ethiopia, Japan, Korea, Southeast Asia etc.
Calf weaner cattle mainly used in the calf with weaning, put this product on the nose), when the www(dot)livestocktool(dot)com mavs will eat milk, nose sore point will become the cow, the cow won't let the calf to eat milk.
The Plasson bell chicken nipple drinkers is made from a rugged plastic made to stand the test of time in spite very active activity from chickens. www(dot)livestocktool(dot)com Approximately 10 to 12 of the Plasson bell chicken nipple drinkers are needed to serve 1000 adult chickens. In hot climates, experience shows that you might need 12 to 14 drinkers for 1000 chickens. Adjust drinkers to the proper drinking height, always keeping the drinker lip a little higher than the birdâ??s back. The water pressure can be regulated with the pressure regulator.
Hammer Mill >> Simple structure >> High reduction ration >> Easy operation and maintenance >> Low investment >> High manganese or high chrome hammers for option >> Suitable for small scale grinding Description Crushing by the collisions between high-speed hammers and materials, the hammer mill were developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries. The hammer mill can be equipped with motor engine or diesel engine as per requirement. Structure The hammer mill is mainly consist of frame, rotor, hammers, and other parts: 1. Feeding chute 2. Impact plate 3. Hammer 4. Rotor disc 5. Shaft 6. Metal trap 7. Hammer rod 8. Screen 9. Discharging port Working Principle 1. Material is fed into the millâ??s chamber typically by gravity. 2. The material is struck by ganged hammers which are attached to a shaft which rotates at a high speed inside the chamber. The materials are crushed or shattered by the repeated hammer impacts, collisions with the walls of the grinding chamber as well as particle on particle impacts. 3. Perforated metal screens, or bar grates covering the discharge opening of the mill retaining coarse materials for further grinding while allowing qualified sized materials to pass through as finished product. Models: 200*500, 300*500, 400*600
PC Hammer Crusher >> Hammer headwork adopt new technology casting, with wear and impact resistance >> Adjusting grain size to meet customers' need >> Seal body structure solved the problems of crushing plant dust pollution and gray body leakage >> The overall design has attractive appearance, compact structure, less easy damaged parts, easy maintainance. The products are upgraded. Description Hammer crusher is a crushing equipment which utilizes impact energy to crush materials . As a primary crusher, the hammer crusher could crush materials directly from maximum 600-1800mm to 25mm and below. It is suitable for crushing all materials of brittle, medium hardness, and compressive strength less than 150Mpa. So the hammer crusher is applicable to crush medium hardness materials in industries of beneficiation, cement, chemical, metallurgy, and so on, such as the secondary and fine crushing of limestone, coal, etc. This equipment can be adjusted to reach various discharged granularity as the customers' requests. Working Principle Hammer crusher mainly consists of frame, rotor, trapezoidal iron plate, bar grate, etc. And the frame consists of the upper part and the lower part. The rotor consists of main shaft, disk,hinge pin and hammers .The bar grate is below the rotor. The motor drives the rotor to rotate at a high speed. When the materials get into the crushing cavity, they are crushed by the rotating hammers, the crushed products which meet the required size can be discharged from the bar grate and become the final products, the products in larger size are brought back for re-crushing until they reach the required size.
