PTFE Lined Centrifugal Pump, with mechanical seal and FLP motor of 380 V, 60 HZ. Stable for highly acidic / alkaline material.
Branded Pumps
Fuel Pressure Regulator For " Audi & Volkswagen " Part Number : 7P0919679A
Radial bearing and double-direction thrust bearing are installed in the sealing bearing cavity of the motor rotator with the impeller. The dynamic seals of the rotary bearing cavity adopt floating seals or mechanical seals to prevent water from entering into the bearing cavity. Nominal outlet diameter: 350-3200mm Head: 0-10m Flow rate: 0.4-25 m3/s Power:22-1500kw Voltage: 380v, 660v 3kv, 6kv, 10kv Water conditions: Water temperature=50 deg.C Ph value: 4-10 Water quality is mild sewage water. The equivalent diameter of allowed articles =1/10 of nominal outlet dia., and there is no plenty of fiber sundries.
To transfer the extract from storage tank to evaporator balance tank in Herbal and Solvent Extraction Plants. To transfer the liquid and process the liquid from one to other vessel in Pharmaceutical Plants and Chemical Plants.
Syringe pump : Body weight and adjustable occlusion sensitivity ! Syringe 20 ml: 0.1~600 ml/h Syringe 30 ml: 0.1~900 ml/h Syringe 50 ml: 0.1~1300 ml/h
Product features: 1. Safety: water and electric separately. 2. Hot water ( 55° c ) an be provided constantly even ambient temperature down to -25° c. 3. Evi special compressor of copelnd, sanyo or hitachi will be used, relibale quality with high performance. 4. Auxiliary eletric heater, insulation materials used for compressor protection. 5. Convenient: intelligent microprocessor with touch screen display. Trouble shoot shows on display board automatically. 6.World famous brand compressor, 4-way valve, motor, pcb, heat exchanger, emerson alco expansion valve used. 7. Multiple protection function: high pressure, low pressur, overheating, overload anti-freezing, phase sequence, Discharge temperature, suction temperature and so on. 8. All weather operation: stable operation without being influenced by weather. 9. Anti-corrosion: plastic case, coated steel or sus304# stainless steel case are available. 10. Refrigerant of r22, r407c, r134a are for optional. 11. automatically defrosting function included. Technical parameter: Unitsdbt-24wl Heating capacitykw24.00 Heating power inputkw5.70 Operating currenta8.70 Copw/w4.2 Power supply v/ph/hz380/3/50-60 Rated output water temp.°c55 Maximum output water temp.°c60 Compressortypescroll(evi compressor) Refrigerant typer407/410a Lengthmm715 Widthmm715 Heightmm1050 Unit noise level de(a)56 Net /gross weight kg135-160 Certificationcb, ce, emc, rohs, saso, ccc
Features Size range (discharge) 2¡à to 14¡à 50 mm to 350 mm Capacities To 14, 000 gpm To 3, 150 m3/hr Heads To 120 ft To 37 m Heavy duty froth pump for tough flotation froth duties Designed to handle heavy froth, the yaobang horizontal froth pump has a unique inlet and impeller design that is very successful at pumping froth. Benefits Bearing assembly ¡§c a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. Liners ¡§c easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Casing ¡§c casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Impeller ¡§c unique impeller inducer blade handles heavy froth and higher viscosity dense slurries with ease Throatbush ¡§c wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. 1200*1000*900mm 3inch 1950kg
To 37 m Heavy duty froth pump for tough flotation froth duties Designed to handle heavy froth, the yaobang® horizontal froth pump has a unique inlet and impeller design that is very successful at pumping froth. Container
Details: Yn series dredge pumps are horizontal cantilevered single stage , single suction pump. Generally. Large dredging depth, high density of dredging mud, good npsh and strong suction lift ability. It is used in submarine. Can meet all the requirements from the dredge. Specification: Capacity/flow: 1800-25000m3/h Head / lift: 20-78m Speed: 180-550 rpm Medium density: Ph of medium: 5-12 Caliber: 300mm -1000mm Container
• Heads To 150 ft To 46 m Container
Specification: Capacity/flow: 4-2500m3/h Head / lift: 9-130 m Speed: rpm Power: 0.55-800kw Medium density: Ph of medium: 5-12 Caliber: 40mm -300mm Container
4 flow range :0-200ml / min (without speed control circuit) 7 standard pump tube: inner diameter 2.5 * outside diameter 4.5 (mm) silicone tube (pump tube can be changed according to required flow rate ) 8 product weight: 85g 9 hole pitch for set-up: 47mm 10 pump head design is for easy disassembly, easy cleaning and maintenance 11 24 hours soak test is recommened for pump tube before the use of acid / alkali medium.
Peristaltic dosing pump ab12 1 applicable power: dc6v 2 working environment: temperature 0-40 ¡ã c, relative humidity
Arcing is eliminated. Connect the red battery clamp to the positive battery terminal. Connect the black Clamp to the negative or ground to a rigid metallic surface on the engine. The connection should be 12 to 19 inches from the battery. 4.Hose: Since the pump has a lower discharge pressure it is ., recommended that anoncolapsiable hose be used for maximum pumping capacity. 5.Hoisting & lowering: Use the attached nylon line. Do not use the power cord ., for handling the unit. 6.Operation of unit: Lower the unit into the liquid to be pumped(note: this unit is not to used to pump Flamable liquids).Then turn on the switch. Pump can be run for a few minutes(less than 5) without liquid. Do not run completely dry for any extended period(less than 5 min.).This will prevent. 7.Running time peroids: The unit draws 20-25 amperes and can be operated for approximately 1 hr. On a fully charged 60 amp-hour battery and still be able to start the vehicle under normal conditions. Caution should be used when running times exceeds 25 !v 30 minutes without the engine running to recharge the battery. Also be mindful of cold temperatures which lowers battery
Spe3 series 1/3 hp effluent pumps 1.1/2" solids handling 2.Heavy duty lip & mechanical seals in tandem 3.115 & 230 volts available 4.60hz 5.Durable cast iron motor housing 6.115 & 230 volt piggyback power plug and switch Plug w/20' cord as standard
Dsgp1-2021-60hz Dsgp1-2023-60hz 2 hp grinder pump 1.Double mechanical seal 2.Silicon carbide (main) !v grit 3.Resistant 4.Carbon ceramic (secondary) 5.Dual sealing chambers with 6.Moisture detection for optimum 7.Motor protection ductile iron 8.Impeller, recessed, clog-free 9.30 year proven design 10.Stainless steel grinder assembly 11.Effectively macerates domestic 12.Into a fine slurry
Dshhgp1-2021-60hz 2 hp grinder pump 1.Ideal for long discharge runs or high static heads 2.2 piece motor housing 3.Separate cord cap assembly 4.Internal capacitors - no control box req'd ductile iron impeller, recessed, clog-free dual silicon carbide seal - grit resistant stainless steel grinder assembly effectively macerates domestic sewage into a fine slurry 5.30 year proven design
Digp-7023/7043-60hz (patented) 1.Available with 2.7.5 hp grinder pump 3.High head, double stage 4.Doubled output pressure 5.Unmatched performance 6.350 shut-off head 7.Flows to 100 gpm 8.Balanced design 9.Ideal for long discharge runs or high static 10.Heads 11.Potentially replaces higher hp pumps 12.Ductile iron impeller, recessed, clog-free 13.Silicon carbide seals !v grit resistant
7w 9w 12w air cooler pump for mideast market. Popular in iraq Long life good quality best price According to your requirements
