RIT001 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC0.01, Overload Capacity: 200% for 1 minute, Power Supply: DC14.2V to 15.8V, Output Voltage: ±1V, Accuracy: 1%, Linearity: 0.2%, Zero Offset Voltage: ±10mV, Dynamic Response Time: 2ms, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
HIT600 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC600A, AC424A, Overload Capacity: DC720A for 1 minute, Power Supply: DC14.2V to 15.8V, Ratio: 3000:1, Secondary Burden Resistance: 2 ~ 5�©, Accuracy: 0.05%, Linearity: 50ppm, Current Change Rate: 100A/us, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
IIT200 has a high gain and measurement accuracy in the full bandwidth range, due to the application of the multi-point zero-flux technology system and high-frequency ripple sensing channel on top of currently existing DC sensor technology. Primary Nominal Current: DC200A, AC141A, Overload Capacity: DC240A for 1 minute, Power Supply: DC14.2V to 15.8V, Ratio: 2000:1, Secondary Burden Resistance: 10 ~ 25, Accuracy: 0.02%, Linearity: 20ppm, Current Change Rate: 200A/us, Frequency bandwidth(-3dB): up to 100KHz, Insulation Voltage (Between primary and secondary): 5KV, Operation Temperature Range: -40 ~ 85.
DIT600-SG high-precision digital current sensor products are a new generation of digital sensors developed and produced by Hangzhi. This product adopts brand-new software and hardware design, can measure single-phase AC and DC current and frequency at the same time. The high-precision digital current sensor provided by Hangzhi for the above equipment plays a key role in the measurement of current in its process control. The digitalized data output reduces the difficulty for customers to collect current signals and greatly reduced the cost of the customers.
AIT1500-10V has a high gain and measurement accuracy in the full bandwidth range, due totheapplicationof the multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. Measuring range: ±1500A Output signal: standard 0-10V voltage signal Accuracy: 50ppm (Parts Per Million) Linearity: max 20ppm; Time stability: 0.5ppm/month; Temperature stability: 0.5ppm/K; Frequency Bandwidth (-3dB): 500kHz; Dynamic response time: di/dt=1.5V/us.
inner gold and outer tin
JT-KL gas alarm Description JT-KL gas alarm is a kind of wall-mounted household gas alarm designed to detect the concentration of combustible gas or vapors using high quality air-sensitive component and manufactured with advanced technology. It provides visual and audio signals when the gas concentration reaches the presetting alarm range, and reminds you taking prompt favorable action. You may start up other link equipment, open windows orshut off gas supply to avoid fire, explosion, suffocation, or other malignant accidents. JT-KL gas alarm Features Sensor lifespan7 years High sensitivity and fast response Easy installation Compliance with EN50194-1:2009 JT-KL gas alarm Application It provides visual and audio signals when the gas concentration reaches the presetting alarm range, and reminds you taking prompt favorable action. You may start up other link equipment, open windows orshut off gas supply to avoid fire, explosion, suffocation, or other malignant accidents. JT-KL gas alarm Specifications Model JT-KL Working voltage AC220V+15% 50Hz PowerConsumption 11.2W Environment Temperature: -10 C 55 C, Humidity:
Specification of Gastec Gas Detection System Detector Tubes/gastec stain tube detectors 10 Tube No.: 10 Gas to be measured: Nitrogen oxide(NO) Measuring Range: 2.5-200ppm Shelf life: 3 years (after production) We have more than 600 types of tube, for other tubes and specification details, please contact us . Features of Gastec Short-term quick-measuring detector tubes (1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time (2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube (3)An extensive measuring range can be obtained by adjusting the sampling volume (4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube (5)Long shelf-life with excellent long-term stability Product description of Gastec Short-term quick-measuring detector tubes As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world. GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends. Our Competitive Advantage 1.With 20 years exporting experience 2. Certificate: ISO, SGS, SEI 3. Price at least 5% Lower Than other competitors in China 4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days 5. Technology Support: According to customer's exact requirements, supply valuable solutions 6. Service: your inquiry can be replied within 24 hours during working days
Contact Material Brass Insulator: Black Polyester UL94V-0 Standard: PBT+30%G.F Current Rating 1.5Amps/contact max Withstanding Voltage: 450V AC/minute Plating Gold Plated/ Tin Plated
Contact Material Brass Insulator: Black Polyester UL94V-0 Standard: PBT+30%G.F Current Rating 1.5Amps/contact max Withstanding Voltage: 450V AC/minute Plating Gold Plated/ Tin Plated
Contact Material Brass Insulator: Black Polyester UL94V-0 Standard: PBT+30%G.F Current Rating 1.5Amps/contact max Withstanding Voltage: 450V AC/minute Plating Gold Plated/ Tin Plated
Contact Material Brass Insulator: Black Polyester UL94V-0 Standard: PBT+30%G.F Current Rating 1.5Amps/contact max Withstanding Voltage: 450V AC/minute Plating Gold Plated/ Tin Plated
Contact Material Brass Insulator: Black Polyester UL94V-0 Standard: PBT+30%G.F Current Rating 1.5Amps/contact max Withstanding Voltage: 450V AC/minute Plating Gold Plated/ Tin Plated
Contact Material Brass Insulator: Black Polyester UL94V-0 Standard: PBT+30%G.F Current Rating 1.5Amps/contact max Withstanding Voltage: 450V AC/minute Plating Gold Plated/ Tin Plated
Product Introduction The wet gas flowmeter is a volumetric gas flowmeter. Its measurement range ranges from 0.016L/min for small flow to 200L/min for large flow. It has high accuracy, no leakage, and good stability. It is suitable for gas volume or flow measurement in laboratories, research institutions, environmental measurement, production sites, etc. It can also be used as a transmission standard and working standard, and is widely used in gas appliances, energy, chemical industry, environment, medicine, calibration and other industries. The products have been exported to Europe, America, Asia and other countries and regions. � Product Features 1. Extra-wide flow range 1:300 2. Repeatability better than 0.1% 3. Intelligent correction (Volume and flow rate automatic correction) 4. Various automatic measurement methods (constant volume output, timing output, and fixed whole revolution output) 5. Full digital flow meters (Temperature, Pressure, Volume, High-precision measurement of flow, RS485 Bus Communication) 6. Intelligent wire control start and stop 7. Each is strictly calibrated with � 0.05-stage active piston prover to ensure accuracy 8.� No leakage (using advanced magnetically coupled transmission technology, non-oil seal) � Precision (Repeatability) Standard Flow Range: �± 0.1% (Standard deviation) Entire Flow Range: �± 0.15% (Standard deviation) � Material (Anti-corrosion) 304 stainless steel 316 stainless steel (customized) Temperature measurement: 0-50 Pressure measurement: 0-10kPa
This product is a smart home security alarm system, which combines home security, healthy life and elderly care. It transmits alarm information through dual network of Wi-Fi and GSM, simple, safe and fast. Bluetooth network configuration, faster and more stable! Wherever you are in office, or on a business trip at abroad, it is with you. You could know the status of your smart intruder alarm system, monitoring whatâ??s happening in the house, keep close to your parents, even whatâ??s the humidity and temperature indoor and outdoor. It make you enjoy a safe and smart life. Features are as follows: (1) APP supports Apple and Android systems. (2) Bluetooth network configuration, faster and more stable! (3) There is no limit to the number of alarm hosts that can be bound to each smartphone; each user of the alarm host can log in through administrator or general member mode, of which the administrator is limited to one person and the number of general members is unlimited. (4) Can set 5 groups of SMS alarm numbers and 5 groups of phone alarm numbers. (5) Supports 99 wireless defense zones, 30 fire defense zones, 8 emergency call defense zones, 8 medical rescue defense zones, 4 water leakage defense zones, and can be equipped with 20 remote controllers or access control keypads (the remote controller can also be used for emergency alarm); 4 wireless sirens can be configured. (6) Scan the QR code to add wireless accessories to the host, accurate, convenient and fast. (7) The default setting includes seven languages and voice switching (Chinese, English, Russian, Spanish, French, German, Italian). (8) Two-way intercom function; (9) Timed arming, timed disarming and timed stay function (each timer can be set for three groups of time); (10) WIFI failure and telephone network failure prompt function; (11) Door and window open reminder function; (12) Detector low battery prompt function, detector offline prompt function (13) Supports delayed alarm function, delayed arming and delayed disarming function (0-99 seconds optional); (14) When the host alarms, the srien sounding time can be selected (0-254 seconds or always sounding); (15) In addition to the APP, you can also remotely control the arming and disarming of the host by SMS or dial buttons during a phone call; (16) The host has the function of staying on defense (only valid for intrusion defense zones 1-99); (17) Can record 10 seconds of alarm voice; (18) External power failure/recovery alarm function (optional to turn on or off); (19) Remote arm/disarm siren sound prompt function (optional to turn on or off); (20) Remote controller arm/disarm SMS reminder function (optional to turn on or off); (21) Door and window opening/closing reminder function in disarmed state (optional to turn on or off).
Type: Lithium Iron Phosphate(Lifepo4)Cell Model: LF230 Nominal voltage: 3.2V Nominal capacity: 230Ah Charge cut-off voltage: 3.65V Discharge cut-off voltage: 2.5V Max charge current: 230A Max Continuous discharge current: 230A Peak discharge current: 460A(1-3S) Charge temperature: 0~55â?? Discharge temperature: -20~65â?? Internal Resistance: â?¤0.25m�© Cycle life: 4000 cycles @0.5C/0.5C at 25 Battery Weight: Approx 4.3Kg Battery Dimension: 173.9 ±0.5mm*53.85 ±0.5mm*207.2 ±0.5mm Terminal: M6*10mm
Hp Zbook 14 u g5/g6 i5 8th gen 8gb/256ssd 250 pieces available
Type: Lithium Iron Phosphate(Lifepo4)Cell Model: LF150 Nominal voltage: 3.2V Nominal capacity: 150Ah Charge cut-off voltage: 3.65V Discharge cut-off voltage: 2.5V Standard Charge Current: 75A Max charge current: 150A Max Continuous discharge current: 150A Peak discharge current: 300A(1-3S) Charge temperature: 0~55â?? Discharge temperature: -20~65 Internal Resistance: 0.4m Cycle life: 4000 cycles @0.5C/0.5C at 25 Battery Weight: Approx 2.9Kg Battery Dimension: 200.70.5mm*33.250.5mm*207 0.5mm Terminal: M6*10mm
Contact material: Brass Insulater Material: Black Polyester UL94V-0 Standard: PA6T+30%G.F
