Asian Communication Devices Suppliers and Manufacturers

USPACE&EAGLE FA series signal and spectrum analyzer not only provides excellent RF performance, but also a standard analysis bandwidth of 100MHz, which can demodulate multiple communication standard signals (such as WCDMA, NB-IOT, LTE, 5G NR). I/Q develop interface can be opened for special application requirements. USPACE&EAGLE FA series signal and spectrum analyzer provides a three-year warranty service, and ultra-low maintenance cost. The platform adopts high-performance x86 architecture and the host is equipped with Windows10 operating system. The platform is equipped with high reliability solid-state drive, highresolution screen, and excellent human-computer interaction performance.

USPACE&EAGLE VS series vector signal generator not only provides excellent RF performance, but also a standard 100MHz baseband generator, which can generate multiple communication standard signals (such as WCDMA, NB-IOT, LTE, 5G NR , NB-IOT). Meanwhile, the generator also generate different signals from Matlab software. USPACE&EAGLE VS series vector signal generator provides a three-year warranty service, and ultra-low maintenance cost. The platform adopts high-performance x86 architecture and the host is equipped with Windows10 operating system. The platform is equipped with high reliability solid-state drive, high-resolution screen, and excellent human-computer interaction performance.

CPM-80 multifunction power analyzer is a competitive product for power monitoring with following key features: - High Accuracy: 0.2S - Ethernet communication (Modbus TCP/IP) - Swell/ Sag - Waveform Capture - 3.5'' TFT LCD Full color screen It provides high accuracy single phase and three-phase energy measuring and displaying, energy accumulating, power quality analysis, data logging and data communication. CPM-80 series multifunction power analyzer are able to measure bi-directional, four quadrants kWh and kVarh. It provides maximum/minimum records for power usage and power demand parameters. Hardware standard built in 1 RS485 Modbus communication port , 4 Digital inputs, 2 Relay outputs, LCM and 2MB flash for data-logging. In addition , also provide TOU , voltage and current THD, harmonics up to the 63rd and auto wiring change via software .

Wavetel Hybrid IPPBX HG100 is a Multi-function Integrated Service Switch System with All-in-one solution. It applies TDM, VoIP, advanced and soft-switch technology, and it could also be used as trunk gateway or signaling gateway. HG100 provides multiple types of interfaces including Ethernet, FXS, FXO and E1, so that it could work with IAD, PBX, analog phone, IP phone, soft phone, Fax, POS, etc. HG100 can be interconnected with third-party gateway, soft-switch or IMS through SIP and other agreements. At the same time, it can also be interconnected with PSTN or traditional PBX through SS7, PRI, etc.

Voip Gateway IAD series to meet the NGN requirement of Telecom carrier, Internet Service Provider, SMB/SME users and home users.It is able to provide safe and high-efficiency voice services, with all kinds of protocols and functions.

Model Number: UIYCDC6432A1900T2200NF Frequency Range: 1900~2200MHz Bandwidth: 25% Insertion Loss:0.8dB Isolation: 40dB VSWR: 1.25 Forward Power: 200W Reverse Power: 200W Connector Type: N Female Temperature: -30 +70C Dimension: 64 32 18mm A RF Microwave Components Manufacturer and Communication Equipment RF Module Supplier. We specialized in: RF Isolator / Circulator Coaxial Termination / Attenuator Waveguide to Coaxial Adapter Filter / Duplexer / Power Divider / Splitter Hybrid Combiner / Directional Coupler Tx & Rx Multicoupler

Driver: mr-h ACN series ssc-net compatible AC same service rated output: 0.2KW The same server controller can easily convert the operation module and Fieldbus module through the automation interface At the same time, different fieldbus modules are used to realize different control modes (RS232, RS485, optical fiber, INTERBUS and PROFIBUS), while the control mode of general frequency converter is compared with single-mr-pwcns5. The servo controller is directly connected to the resolver or encoder to form a closed-loop mr-pwcns5 for speed and displacement control, while the general frequency converter can only form an open-loop control system mr-pwcns5 The control indexes of servo controller (such as steady-state accuracy and dynamic performance) are better than general frequency converter. Optical fiber length: 0.5m. Sscneti application cable (standard optical fiber used in the control cabinet). Connector for cn1a and cn1b, Shenji general AC servo amplifier melcervo-j3 series mr-pwcns5, rated output: 5.0kw. Interface type: sscnet optical fiber communication type. Power specification: three-phase AC400V. By using sscnet III high-speed serial communication with the fastest communication cycle of 0.44ms between the motion controller and the servo amplifier, a fully synchronous control system can be constructed. Just insert the special optical fiber into the connector to form the sscnet network, which greatly reduces the wiring work and the possibility of miswiring. Due to the use of optical fiber communication, the anti noise ability is greatly improved, and the original mr-pwcns5 can realize long-distance wiring up to 800m (the maximum 50m x16 axis between stations) Provide servo amplifier mr-j3-b-rj006 meeting the full closed-loop control function. It is suitable for the optimization and adjustment of the same clothes of dry machinery More advanced optimization adjustment function and control function to maximize the mechanical performance. Electric general AC servo amplifier melcervo - J3 series. Rated output: 7.0kw original mr-pwcns5 interface type: sscnet optical fiber communication type. Special specification: full closed loop control type. Power specification: three phase ac200v. High precision and high response positioning control. The full closed-loop control with high response can be realized through double feedback control, The dual feedback control can be performed when switching between the servo motor encoder and the load side encoder. Mr-j3-b-rj006 can be used with linear encoders from many manufacturers. Users can build the original mr-pwcns5 system according to their own accuracy requirements. The ABS linear encoder with serial interface can easily build an absolute position detection system without installing a battery on the servo amplifier.

Wavetel Hybrid IPPBX HG100 is a Multi-function Integrated Service Switch System with All-in-one solution. It applies TDM, VoIP, advanced and soft-switch technology, and it could also be used as trunk gateway or signaling gateway. HG100 provides multiple types of interfaces including Ethernet, FXS, FXO and E1, so that it could work with IAD, PBX, analog phone, IP phone, soft phone, Fax, POS, etc. HG100 can be interconnected with third-party gateway, soft-switch or IMS through SIP and other agreements. At the same time, it can also be interconnected with PSTN or traditional PBX through SS7, PRI, etc.