Alumina Ceramic Alumina ceramic is kind of structural ceramics, with insulation resistance, voltage resistance, high strength, good thermal conductivity, dielectric loss, stable electrical performance characteristics. Used in electronic ceramic substrates, ceramic electrical insulation, vacuum devices, devices porcelain, spark plugs and other products. We can make the part by hot injection pressing, dry pressing, 200T isostatic pressing and extrusion productive technology etc. Properties of Alumina/Aluminum Oxide (Al2O3) Very good electrical insulation (1x1014 to 1x1015 �©cm) Moderate to extremely high mechanical strength (300 to 630 MPa) Very high compressive strength (2,000 to 4,000 MPa) High hardness (15 to 19 GPa) Moderate thermal conductivity (20 to 30 W/mK) High corrosion and wear resistance Good gliding properties Low density (3.75 to 3.95 g/cm3) Operating temperature without mechanical load 1,000 to 1,500°C. Advantages Application Excellent mechanical strength Power semiconductor modules Excellent electrical insulation Concentrator Photovoltaic Arrays (CPV)solar arrays High thermal stability solid-state relays High thermal conductivity High frequncy switch mode power supplies(SMPS) The thermal expansion coefficient is close to that of silicon Electronic heating devices may be structured just like printed circuit boards Automobile electronics Power LED module Electronic heating devices DBC substrate are composed of a ceramic insulator,Al2O3 or AIN onto which pure copper metal is attached by a high temperature eutectic melting process and thus tightly and firmly joined to the ceramic, DBC substrates have high thermal conductivity,excellent electrical insulation,excellent current carrying capability, and good mechanical strength,and the thermal expansion coefficient is close to that of silicon etc.As a new and high capability substrate.DBC substrates have been used widely in electric power and electronic industry.
BeO ceramic materials.BeO has high thermal conductivity, high melting point (2530 ± 10°C), high strength, high insulation, high chemical and thermal stability, low dielectric constant, low dielectric loss and good adaptability properties,etc.Widely used in special metallurgy,vacuum electronics,nuclear technology,microelectronics and optoelectronics. Especially in high-power semiconductor devices,integrated circuits, package microwave vacuum devices and nuclear reactors. Beryllium oxide (BeO), also known as beryllia, is an amorphous solid. Its high melting point leads to its use as a refractory material. Sintered beryllium oxide is a very stable ceramic. BeO-ceramic has a high range of thermal conductivity between 300 500 W/(m.k), the highest among all ceramic materials used in electronic technology. It is used in many high-performance semiconductor parts for applications such as radio equipment ,a filler in some thermal interface materials such as thermal grease, a structural ceramic for high-performance microwave devices, vacuum tubes, magnetrons, and gas lasers,etc... Features 1. High thermal conductivity 2. High melting point 3. Excellent insulation 4. Low dielectric constant 5. Coating Layer: Molybdenum-Manganese(Mo/Mn) T: 8~30m Plated Layer: Nickel(Ni), Copper(Cu), Gold(Au), Etc. T: 2~9m 6. Excellent thermal shock resistance
HTCC/LTCC High /Low Temperature Co-fired Ceramic material.Co-fired ceramic devices are fabricated using a multi-layer approach. The starting material is composite green tapes, consisting of ceramic particles mixed with polymer binders. The tapes are flexible and canbe machined, for example using cutting, milling, punching and embossing. Multilayers based on Low or High Temperature Co-fired Ceramics (LTCC/HTCC) have a wide range of applications in different fields of electronics and Micro systems.With its ability to become three-dimensional structure.It is possible to integrate electrical circuits, to build up mechanical, fluidic or optical based sensory solutions and to realize ceramic packages for Sibased Logic or MEMS.
Ceramic Glaze Frits Our frit companies have made its mark as a Manufacturer and Supplier of Ceramic Glaze Frits in Indian Ceramic Industries The wide range of the Ceramic Glaze Frits, offered by the company, is available in numerous variants of OPEC, TR and ENGOB. The quality and cost-effective pricing of the Ceramic Glaze Frits makes them a popular choice for the ceramic industry. Ceramic frits are used as raw materials in elaborating ceramic glazes. Ceramic glazes can be applied either dry or wet in the ceramic tile manufacturing process, although the wet application predominates. There are different types of glazes, in terms of their physical state and form of packaging, and a great part of the frits produced are used in the formulation of compositions, mixed in proportioning facilities with other raw materials, additives and ceramic colours. Frit Applications Wall Tiles Single and Double fast fire, Floor and Glazed Porcelain Tiles, Sanitary ware and Bone China ware Frits, Special Bonding application Frits.
Harmony of emotion and sensationArrezo Bianco with Polished - Size : 120x180 cm
1)Physical property : Melamine formaldehyde molding compound price are based on melamine-formaldehyde resins fortified with high-class celluloseas reinforcement and further modified with minor amounts of specialpurpose additives, pigments, cure regulators and lubricants. 2)Usage: For making dinnerware ,tableware ,fridge food box , insulation parts , electrical parts , aviation use cups and tableware . 3)Advantage : Melamine moulding compound finished item with surface hardness . With excellent resistance to abrasion, boiling water,detergents,weak acids Are specifically approved for food contact.
SEPPE PETRO is a professional supplier and manufacturer of ceramic proppant such as Ultra lightweight, light weight proppant, Intermediate strength proppant , Ultra-High density sintered bauxite proppant that are used in the exploitation of hydraulic fracturing in gas&oil fields. Our company is the largest and most technologically advanced high-tech enterprises of ceramic proppant in China. The company has own independent mining resource, modern production technique and advanced technical force. Our proppants have good sphericity, smooth surface, high compressive strength, and perfect long term conductivity, which have fully exceeded the standards of ISO13503-2 and API RP60. We follow the business concept of Trust, Innovation and Development and provide our clients with professional and individual service in logistics transport.
Ceramic micro powder MB-1 MB-2 TOPFINE® MB-1 MB-2 Ceramic powder is a kind of lightweight non-metallic multi-functional materials, main composition is SiO2 and Al2O3, good dispersibility, high covering power, high whiteness, good suspension, good chemical stability, good plasticity, high heat resistance, small density, low ignition loss, good light scattering and good insulation. Can improve the coating adsorption, corrosion resistance, durability, scrub resistance, corrosion resistance and high temperature resistance, improve the mechanical properties of the paint film, increase transparency and improve fireproof performance, can be used for corrosion protection, fire prevention, high temperature resistant, powder, architectural coatings, and various industrial, civil coatings, particularly suitable for specular half optical coatings and its agent, dosage of alternative titanium dioxide, eliminate the light caused by the use of titanium pigment flocculation phenomenon, prevent coating yellowed, and can reduce production cost. PRODUCT HIGHLIGHTS � Suitable for high gloss semi-gloss coatings and other capacitors. � Replace titanium dioxide, prevent paint from yellowing � Reduce factory produce cost � Good dispersion, high hiding power and high whiteness � Improve the adsorption of paint � Increase transparency and improve fire performance � The hollow structure weight reduces the weight of the product. Item modified hollow ceramic powder MB-1 modified hollow ceramic powder MB-1 application Appearance � white powder 1 Civil building paint 2 Solid industrial coating 3 Solvent industrial surface paint, electrophoretic paint 4 Maintenance coating 5 Powder coating 6 Coil coating 7 primer paint 8 Especially suitable for water-base coating Whiteness GE >70 >93 Particle size (μm ) 3-5μm Packing density(g/cm3) 0.6-0.8 Oil absorption value 32-38 325 mesh residues% �0.1 PH value 6-7 Mohs scale 5-6 Heating loss % � 0.10
Ceramic beads is high grade green casting material, made of high Alumina Calcined Bauxite, processed through fusing, spraying, sieving, get rid of impurity and special procedures. With ideal spherical shape, excellent fluidity and filling property, Ceramic beads is widely used in various sizes of steel/iron/alloy casting parts. It is suitable for various bonds of casting mold and can meet different needs of various customers. Specification (Size): AFS20/AFS30/AFS40/AFS50/AFS55/AFS65/AFS75/AFS90/AFS100 Special grades can be customized. Shape: Spherical  Shape
Bauxite proppant, also known as ceramic proppant, is an engineered material used in hydraulic fracturing (fracking) to enhance the extraction of oil and natural gas from unconventional reservoirs. The most common proppant is sand, but there is growing interest in engineered proppants. Engineered proppants are made from ceramics, typically derived from bauxite, offering advantages such as uniform size and shape, as well as high strength. The ability to strictly control particle size maximizes porosity, thereby maximizing the extraction of natural gas. Sintered bauxite proppants can be widely used in deep wells and high-pressure oil and gas reservoir fracturing treatments. Using high-quality bauxite as the main raw material, it is crushed, finely ground into powder, mixed with various additives, repeatedly kneaded, granulated, polished, and sintered at high temperatures to form the product. The product features high compressive strength, low density, sphericity, good roundness, high smoothness, and strong conductivity. What role does bauxite soil play in making proppant for petroleum fracturing?
Product Application: Ceramic salt cores are primarily used in the casting process of liquid forging aluminum alloy pistons. By forming cavities inside the piston, ceramic salt cores help achieve an internal cooling structure for the piston. Features: High Strength: By adding ceramic additives, ceramic salt cores achieve high strength, enhancing their ability to withstand high temperatures and pressures of aluminum liquid. High Density: Multiple granulation techniques are employed to achieve high density in ceramic salt cores, contributing to the overall quality of the castings. Low Linear Expansion Coefficient: Through innovative sintering techniques, ceramic salt cores achieve a low linear expansion coefficient, reducing the impact of thermal expansion on aluminum alloy pistons. Ceramic salt cores are typically used in the casting of liquid forging aluminum alloy pistons. Compared to traditional salt cores, ceramic salt cores meet the requirements of high-pressure casting processes for salt cores by increasing ceramic additives, using multiple granulation techniques, and innovative sintering techniques to achieve high strength, high density, and low linear expansion coefficient performance.
We can provide you with high-quality cork products in a timely manner. The cork products produced by our factory are: 1+1 cork stoppers, glass bottle stoppers, natural cork stoppers, synthetic cork stoppers, plastic caps and cork stoppers. Cork grips, cork coasters, cork message boards, cork balls, cork coils, rubber stoppers, plastic wine corks, electric hot bucket water pine handles, cork floors, cork decorative materials, etc.; And can be stamped, sanded a variety of shapes
Pvc sequins Details of the sequins Material: pvc thickness: 24c-26c Colors: silver base color, laser bright color, transparent color, transparent bright color, cream bright color. Dull bright color Shape: flower, people, tree, leaf. Shell, round , maple, star, butterfly , and other requested. Oem: yes Package:500g/bag, 22.5kgs/carton Payment term: tt, lc , western union, money gram. Trade term:exw, fob, cfr , cif Moq: 100kgs/color Delivery time: about 20 days after receiving the lc or the deposit . Advantage: We are the factory, so the price will be much competitive. And the quality can be well controled. We can control all the production line so that can make everything going well. For about twenty years' exporting, we know clearly the quality in different countries. 500g per bag, 50 bags per carton
