1.1 Main dimension: 11400 x 1600 x 1800mm 1.2 Total weight: 14000kg 1.3 Main motor: 18.5kW 1.4 Hydraulic motor: 5.5kW 1.5 Hydraulic pressure: 15-20MPa 1.6 Steps of rollers: Feeding & guiding: two sets Leveling: one set, seven rollers Main forming: 17 steps Rib making: one step Rectifying: one step 1.7 Forming speed: 15 m/min maximum 1.8 Changing speed from one profile to another or from one size to another size: 3 minutes. 1.9 Purling specifications: For C purling: 100-350mm For Z purling: 100-350mm 1.10 Suitable material: 1.6-3.2mm, Q195~235 cold rolled steel, hot-zinc coil 1.11 Material of rollers: GCr15, 9CrSi, quenched 1.12 Material of rib roller: GCr15, 40Cr, quenched 1.13 Shape of rib: slash rib 1.14Dimension of punch adjustable:45-500mm Seaworthy
Eps sandwich panel machine, sandwich panel machine, rock wool sandwich panel machine, pu sandwich panel machine, sandwich panel machinery, sandwich panel line Seaworthy
Optional trolleyáwheel ModelZS60 EngineAir-cooled,4-cycle cylinder Engine typePetrol,Honda GX 160 Power kw(hp) 4.0(5.5) Weight kg(ibs) 64(140) Frequency(vpm) 5600 Centrifugal Force(kN)10.5 Compaction Depth cm(in)20(8) Travel Speed cm/s(in/s)40(16) Efficiency m2/hr(ft2/hr)450(4800) Plate Size cm(in)53+35(21+14) Dimension cm(in)102+40+97(40+15+38) Packing way: Steel frame outside the carton Gross weight:69KG. Packing size: 720*410*620á
Sand washing machine Model Wheel Size (mm) Max feed size (mm) Power (kW) Weight (t) Capacity (t/h) Overall dimension (mm) XSD2610 2600 1000 10 5.5 2.7 20-50 3255 1982 2690 XSD2816 2800 1600 10 11 3 30-60 3540 3000 2880 XSD3016 3000 1600 10 15 3.3 50-100 3845 3000 3080 In bulk
This machine is the latest model that is developed for minimizing the manpower. On this machine, the system is working from roll to roll or roll to cut piece. The machine is formed of the following units; Roll feeding unit with edge control Side sealing unit Reserve unit Spout sealing unit -1 (bottom spout sealing) Spout sealing unit -2 (top spout sealing) Perforation unit Bottom sealing unit Roll re-winder unit (optional) Length cutting (cold cut) unit
Removable tunnel kiln of making clay bricks
Scarifier Description:- This is the latest in grinding technoiogy for rernoving all types of coatings, stains, contamination and flooring inperfections. High performance machine for concrete floor preparation. Ideal machine for preparing ondustrial floors to take epoxy or other toppings. Removes up to 4mm in one pass. Handwheel for precise grinding depth. Two speed forward and reverse transmission. High performance octagonal carbide tipped cutters. Vacuum attachment, lifting sling, safety switch. 7.5 KW, 440 w motor, Weight 350 Kg. Working width 300mm. Output : 50 m2/hr.
Rammer Specifications:- Length of compaction shoe - 700mm Width of compaction shoe - 500mm over all length - 1500mm over all width - 500mm over all height - 1500mm Travel speed - 10m/min Depth of compaction - 30cm Weight - 150kg
Ride on Trowel Description:- Engine - Honed 24 HP/B & S vanguard 22 HP Start - Elrc.starter Overlap - No Net weight - (kg) 270 Working Weight - (kg) 330 Blades speed - (RPM) 140 WORKING Width - (MM) 1880 Size (MM) - 1900 x 1000 x 1050
Vacuum Dewatering System Double beam screed vibrator Jamshedji double beam screed vibrator is self-traveling and only requires guiding along the formwork dragged by two operators and they do not need to work in concrete. It is light in weight, economical to maintain, durable high quality heavy-duty spring steel, portable stressing bars for leveling. Beams of different sizes can be provided, if ordered.
Walk Behind Roller Description --------------- Value Working weight --------------- 180kg Working width --------------- 560 mm Actual load --------------- 2.9 kg/cm Walking speed --------------- 1.6 km/hr Frequency --------------- 4620/rpm Centrifugal Force --------------- 10 km Engine --------------- G X 160 5.5hp (Petrol)
JKY60/60-3.8 JKY55/55-3.8 JKY50/50-3.8 JKB55/55-3.0 JKB50/50-3.0 JKR45/45-2.0 JKR40/40-2.0 JKR35/35-1.5 Production capacity (standard brick packs/h) 13000-15000 11000-13000 10000-12000 12000-14000 11000-13000 12000-14000 9000-12000 8000-11000 Reamer diameter (mm) 600 550 500 550 500 450 400 350 Extruding pressure(MPA) 3.8 3.8 3.8 3.0 3.0 2.0 2.0 1.0-2.0 Forming liquid water content (%) 14~16 14~16 14~16 16~18 16~18 18~22 18~22 18~22 Vacuum (MPA) í_-0.092 í_-0.092 í_-0.092 í_-0.092 í_-0.092 í_-0.092 í_-0.092 í_-0.092 Power (KW) 75/200 75/160 55/132 55/132 55/110 45/90 45/75 37/55 The JKY modelíóJKB modelíóJKR model are advanced twin-stage vacuum Brick Presses which draw lessons from the developed domestic, abroad experiences and design to make .They are mainly made of high quality steel with features of reasonable structure, sturdy and durability. And they have strong applicability, high efficiency, easy maintenance but lower energy consumption. They are applicable for the production of high-rate hollow bricks with the materials of coal gangue, shale, high-volume fly-ash, urban construction waste, gangue waste, inferior soil.
Functional process: Load the material for grinding evenly and continuously into the grinding chamber of the main frame. Due to the centrifugal force in rotation, the roller swings outward and presses closely upon the ring. The shovel carries the material to the space between the roller and ring. When the roller rolls, the material is thus ground. After being ground, the material is to be routed to the sorter along the wind belt of the blower and the coarse powder will be put back to the mill for regrinding. The fine powder flows into the cyclone collector together with airflow and is expelled from the discharge pipe as final product. In the grinding chamber, since the material may contain moisture to some extent, the heat generated during grinding makes the moisture evaporated; since the pipeline joints are not airtight, the external air is sucked in and the circulation air amount increases. In order to enable the mill to work under negative pressure, the increased airflow is guided to the deduster anew sequentially to the atmosphere after purification.
Ball mill Ball mill is an efficient tool for grinding many materials into fine powder. The Ball Mill is used to grind many kinds of mine and other materials, or to select the mine.2 It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry way and the wet way. It can be divided into tabular type and flowing type according to different expelling mine. To use the Ball Mill, the material to be ground is loaded into the Neoprene barrel that contains grinding media. As the barrel rotates, the material is crushed between the individual pieces of grinding media that mix and crush the product into fine powder over a period of several hours. Quite simply, the longer the Ball Mill runs, the finer the powder will be. Ultimate particle size depends entirely on how hard the material you're grinding is, and the time how long the Ball Mill runs. Our Ball Mills have been used to grind glass, powder food products, creat custom varnishes,make ceramic glaze, powder various chemicals, and make Black Powder.
The application of cone crusher: The py series cone crusher has been developed to crush high or medium hardness material , such as iron ore , copper ore, limestone, quartz, granite, and sand stones, ect. And it is used in metallurgical, construction, road building, chemical, silicate industries.The cone crusher has the advantage of reliable construction, high prod activity , easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher, use dry oil, water, two kinds of sealed formation. Cone crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depend upon the size of feed and fineness of the crushed product. The standard type is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head is applied to fine crushing. The main features of cone crusher: 1.The py series crushers crushes by the change of the gap in the crushing cavity .The gap is opened and closed by the gyration of main shaft, which is derived by motor through cone gears. 2.The py series cone crusher is of high reduction ratio, high performance, low power consumption, and uniform size products. It has been used in the secondary and tertiary crushing. 3.The cone crusher consists of body frame, transmission shaft, eccentric sleeve, cone bearing, breaking cone, supporting sleeve, adjusting sleeve, feeding part, spring, elastic coupling , lubrication part , electric part, ect.
PLC Control spare parts
Fully-auto main machine, plc control, one whole spare parts, PVC pallets. 7250mm*6000*3500MM
Fully-auto main main machine, semi-atuo production line, one whole sets spare parts.
For polishing granite tiles 1 Unit
Granite double blade edge cutting machine 1 Unit
