FLYING FO-GR Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing.
Product Description
Strong Point of FLYING FO-GR Sublimation Offset Ink   :
 1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.
 2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.
 3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.
 4) Have no skinning within 36 hours in ink-box and no crust in 7 day s at normal temperature, save 20% ink when printing.
 5) Good ink-water balance. Good sun-proof performance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance.
Use Method of FLYING FO-GR Sublimation Offset Ink  :
1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink .
2)Â Put the printed paper on substrates,such as polyester and nylon fabric .
After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates.
3) Put both the paper and substrates on the heat press.
And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image.
4) Finally ,take out paper and fabric from heat press ,the final product will be born .
Typical Uses of  FLYING FO-GR Sublimation Offset Ink  :
Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
FLYING FO-GR Sublimation Offset Ink was designed for offset printing . It was used on all kinds offset printing machine such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing.
Product Description
Strong Point of FLYING FO-GR Sublimation Offset Ink   :
 1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives, totally environmentally-friendly.
 2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced. Ink granula is less than 5um.
 3) All colors are very intense and gives good coverage. Excellent color reproduction, with high printing performance and outcome. Strong dye degree and excellent transfer ability.
 4) Have no skinning within 36 hours in ink-box and no crust in 7 days at normal temperature, save 20% ink when printing.
 5) Good ink-water balance. Good sun-proof perfor mance and high light fastness. Transferred pattern washable, no peeling, no fading and good weather resistance.
Use Method of FLYING FO-GR Sublimation Offset Ink  :
1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink .
2)Â Put the printed paper on substrates,such as polyester and nylon fabric .
After offset printing, put the printed paper on the surface of the substrates , and with printed  surface facing downwards on the surface of substrates.
3) Put both the paper and substrates on the heat press.
And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image.
4) Finally ,take out paper and fabric from heat press ,the final product will be born .
Typical Uses of  FLYING FO-GR Sublimation Offset Ink  :
Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.
Price: US $1,069
Site: suwantoro.com
Accept Paypal
Parts Name : Print Head
Brand : Epson
Parts Code : FA10010
Reference : 560
Type : PRINT HEAD
Condition : Original ,100% Brand-new, Unused, Undamaged, Original Packaging
Compatible Model : Epson SureColor T3000/T3070
Epson SureColor T5000/T5070
Epson SureColor T7000/T7070
Service Manual : No
Packaged Weight(Kg) : 0.5
Packaged Size(cm) : 14*10*9
We are a factory for producing spares and inks for inkjet printers: Domino, Imaje, Linx, Hitachi, Citronix, Willett and Videojet.
Good quality with competitive price.
Please contact me for more information.
2.Acid and alkali resistant,good durability,accurate plate making,can produce fine pattern;
Usage
Apply to squeegee or magnetic rotary screen printing machine in printing and textile industry;
Packing
;1kg per bottle and 15 bottles per carton
;5kgs per barrel and 4 barrels per carton
;10kgs per barrel and 2 barrels per carton
;20kgs per barrel
2.Quick development,high resolution, excellent durability,can produce fine pattern and also can us as thick-plate adhesive
Usage
1.Used for 80~300 meshes;
2.Applicable scope: Network plate-making printing of textile,ceramic and tile;
Packing
;1kg per bottle and 15 bottles per carton
;5kgs per barrel and 4 barrels per carton
;10kgs per barrel and 2 barrels per carton
;20kgs per barrel
Squeege: Â 60-65 SHORE
Mesh: Â 120/inch
Tension:� 25 N/cm2
Clean Up: Â Water
Strokes: Â 3
Rounds: Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege: Â 60-65 SHORE
Mesh: Â 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: Â 3
Rounds: Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege 60-65 SHORE
Mesh: Â 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege: Â 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Â Water
Strokes: Â 3
Rounds  2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege:70-75 SHORE
Mesh: Â 120 190/inch
Tension:Â 25 - 35 N/cm
Clean Up:Â Water
Strokes:Â 3
Rounds:Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege:60-65 SHORE
Mesh:Â 120/inch
Tension:� 25 N/cm2
Clean Up:Â Water
Strokes: Â 3
Rounds: Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 -4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
