Acetone Methly Ethyl Ketone (MEK) Methyl Isobuty Ketone (MIBK) Cyclohexano
Propylene Glycol (MPG-99.5%) TDS | MSDS Mono Ethylene Glycol TDS | MSDS Tri Ethylene Glycol MSDS Diethylene Glycol (DEG) TDS | MSDS Others Alcohol Ester TDS | MSDS Plasticizers DBP TDS | MSDS DOP TDS | MSDS Esters Ethyl Acetate Iso Butyl Acetate TDS | MSDS Iso Propyl Acetate TDS | MSDS N-Propyl Acetate TDS | MSDS N-Butyl Acetate TDS | MSDS Methyl Acetate TDS | MSDS Glycol Ethers Butyl Glycol Ether (BGE) TDS | MSDS Methoxy Propanol TDS | MSDS Methoxy Propyl Acetate TDS | MSDS EGA TDS | MSDS
Butanol (Technical Grade) PRODUCT CODE 2051 DESCRIPTION C4/C5 alcohol distillation cut. Appearance ASTM E2680 Colour Pt-Co Clear and bright 5 max ASTM D1209; ASTM D5386 Water mass % 0.10 max ASTM D1364 n-Butanol mass % 60.0 min GC sec-Pentanol mass % 20.0 max GC Total alcohols mass % 99 min GC Carbonyls as propionaldehyde mass % 0.30 max B124 Properties Units Limits Test Methods Density at 20â?? 0.808-0.811 ASTM D4052 Distillation at 101.3 kPa: Initial boiling point Dry point â?? g/ml 115 â?? 118 ASTM D1078 Iso-butanol mass % 12 GC Further Properties Units Typical values Test Methods The sales Specification values are continuously checked, documented and stored within the scope of Quality assurance Further properties are of an informational nature only and are not checked regularly. If the Sales Specifications are complied with; it can generally be assumed that all further properties and typical data Conform to the values given.
A properly designed and purified catalysts can obtain faster process times, better yields and higher product purity. Bojietech Catalysts are easy to handle and show a low degree of corrosivity. They are the catalysts of choice for some large markets such as fuel ethers, and bisphenol A. Catalysts are supplied either completely water-swollen, or dried to specification. 25L/bag
Amber colored low cost mixed bed for EDM.Suzhou X Chemical offers a complete line of EDM resins ready to use mixed bed and separate component versions specifically designed to meet the needs of the EDM market. The ratio of component resins has been specifically tailored for full demineralization of water to provide the maximum throughput of water of the highest quality. It is suitable for use in regenerable or non-regenerable cartridges and other suitable vessels.
Industrial grade high capacity resin for removal of radium.Radioactive contaminants include radon (an inert gas), radium (a radioactive cation similar to hardness ions) and uranium (almost always present as a radioactive anion). Suzhou X Chemical provides products for all three contaminants. These products are WQA certified ANSI/NSF 61 standard for minimal leachables
high capacity highly regenerated, low sodium hydrogen form cation resin."Condensate Polishing is normally applied to the treatment of condensed steam from turbines operating in the power industry. It is a specialty application where ion exchange resins are used for removal of corrosion transport products as well as removal of trace ionic impurities. This requires the use of resins that have excellent filtration characteristics as well as ion exchange capacity, and that can withstand the high temperatures and flow rates encountered in condensate systems. Polishing resins must also have low levels of both organic and ionic impurities such that they do not leach any objectionable contaminants into the treated water Suzhou X Chemical offers a variety of coarse grade and uniform particle size resins specifically for condensate polishing, including highly crosslinked resins with excellent thermal stability. These resins are available in a variety of ionic forms such as ammonia and amine forms for cation resin and hydroxide form for anion resin, suitable for immediate use without preconditioning or regeneration. "
Overview Quick Details CAS No.: 0 Other Names: Light curing resin MF: 0 EINECS No.: KS-3854 Place of Origin: Guangdong, China Type: Synthetic Resin And Plastics Brand Name: KS Model Number: KS-3854 Purity: 0 Color: Transparent Weight: 1000g Material: UV resin Liquid Density: 85D Viscosity (25�°C) (cps): 300 Wavelength: 395-405 Curing time: 3-5s Shrinkage: 100 Est. Time(days) 5 To be negotiated Video Description 00:00 02:21 Product Description Brand Name/Model No. KS-3854 Color Transparent Weight 1000g Material UV resin Hardness Shore D 85D Viscosity (25�°C) (cps) 300 Liquid Density 1.08-1.2 Elongation at Break % 25% Wavelength (nm) 395-405 Curing time (s) 3-5s Shrinkage %
Overview Quick Details CAS No.: 0 Other Names: Light curing resin MF: 0 EINECS No.: KS-3852C Place of Origin: Guangdong, China Type: Synthetic Resin And Plastics Brand Name: KS Model Number: KS-3852C Purity: 0 Color: Red Weight: 1000g Material: UV resin Liquid Density: 1.08-1.2 Elongation at Break: 22% Wavelength: 395-405 Curing time: 3-5s Shrinkage: 100 Est. Time(days) 5 To be negotiated Product Description 3D Printer Resin 405nm SLA UV Curing Resin with High Precision and Quick Curing Excellent Fluidity for LCD 3D Printing Model No. KS-3852C Color Red Weight 1000g Material UV resin Hardness Shore D 85D Viscosity (25�°C) (cps) 300 Liquid Density 1.08-1.2 Extension Strength (mpa) 37.9mpa Elongation at Break % 22% Wavelength (nm) 395-405 Curing time (s) 3-5s Shrinkage %
Overview Quick Details CAS No.: 0 Other Names: Light curing resin MF: 0 EINECS No.: KS-3852C Place of Origin: Guangdong, China Type: Synthetic Resin And Plastics Brand Name: KS Model Number: KS-3852C Purity: 0 Color: Red Weight: 1000g Material: UV resin Liquid Density: 1.08-1.2 Elongation at Break: 22% Wavelength: 395-405 Curing time: 3-5s Shrinkage: 100 Est. Time(days) 5 To be negotiated Product Description 3D Printer Resin 405nm SLA UV Curing Resin with High Precision and Quick Curing Excellent Fluidity for LCD 3D Printing Model No. KS-3852C Color Red Weight 1000g Material UV resin Hardness Shore D 85D Viscosity (25�°C) (cps) 300 Liquid Density 1.08-1.2 Extension Strength (mpa) 37.9mpa Elongation at Break % 22% Wavelength (nm) 395-405 Curing time (s) 3-5s Shrinkage %
Overview Quick Details CAS No.: 0 Other Names: Light curing resin MF: 0 EINECS No.: KS-3852C Place of Origin: Guangdong, China Type: Synthetic Resin And Plastics Brand Name: KS Model Number: KS-3852C Purity: 0 Color: Red Weight: 1000g Material: UV resin Liquid Density: 1.08-1.2 Elongation at Break: 22% Wavelength: 395-405 Curing time: 3-5s Shrinkage: 100 Est. Time(days) 5 To be negotiated Product Description 3D Printer Resin 405nm SLA UV Curing Resin with High Precision and Quick Curing Excellent Fluidity for LCD 3D Printing Model No. KS-3852C Color Red Weight 1000g Material UV resin Hardness Shore D 85D Viscosity (25�°C) (cps) 300 Liquid Density 1.08-1.2 Extension Strength (mpa) 37.9mpa Elongation at Break % 22% Wavelength (nm) 395-405 Curing time (s) 3-5s Shrinkage %
Overview Quick Details CAS No.: 0 Other Names: Light curing resin MF: 0 EINECS No.: KS-3981 Place of Origin: Guangdong, China Type: Synthetic Resin And Plastics Brand Name : KS Model Number: KS-3981 Purity: 100 Color: Green Weight: 1000g Material: UV resin Liquid Density: 1.05-1.1 Elongation at Break: 30-50% Wavelength: 395-405 Curing time: 1.5-3s Shrinkage: 50 Est. Time(days) 6 To be negotiated KS-3981 Suitable for casting resin,applied to all kinds of jewelry, ornaments, and large size casting products. Characteristics. I00% no residual ash burnout,it can be cast directly. With the combination of toughness and hardness, the printing of large-size cast products will not collapse. The maximum casting temperature is 730-750 degrees, which completely replaces the traditional process. �·Perfect casting quality and reduce surface polishing time. This special resin can be used for any type of DLP and LCD curing 3D printer. Product Description Model No. KS-3981 Color Green Weight 1000g Material UV resin Hardness Shore D 85D Viscosity (25C) (cps) 200-350 Liquid Density 1.05-1.1 Extension Strength (mpa) 15-25mpa Elongation at Break % 30-50% Wavelength (nm) 395-405 Curing time (s) 1.5-3s Shrinkage % 1% Shelf Life One year
Overview Quick Details CAS No.: 0 Other Names: Light curing resin MF: 0 EINECS No.: KS-3860 Place of Origin: Guangdong, China Type: Synthetic Resin And Plastics Brand Name: KS Model Number: KS-3860 Purity: 100 Color: White Weight: 1000g Material: UV resin Liquid Density: 1.02-1.2 Elongation at Break: 30% Wavelength: 395-405 Curing time: 3-5s Shrinkage: 100 Est. Time(days) 5 To be negotiated Product Description Model No. KS-3860 Color White Weight 1000g Material UV resin Hardness Shore D 85D Viscosity (25�°C) (cps) 100-150 Liquid Density 1.08-1.2 Extension Strength (mpa) 32mpa Elongation at Break % 30% Wavelength (nm) 395-405 Curing time (s) 3-5s Shrinkage %
Overview Quick Details CAS No.: 0 Other Names: Light curing resin MF: 0 EINECS No.: KS-3854 Place of Origin: Guangdong, China Type: Synthetic Resin And Plastics Brand Name: KS Model Number: KS-3854 Purity: 100 Color: Transparent Weight: 1000g Material: UV resin Liquid Density: 85D Viscosity (25�°C) (cps): 300 Wavelength: 395-405 Curing time: 3-5s Shrinkage: 100 Est. Time(days) 5 To be negotiated Product Description Brand Name/Model No. KS-3854 Color Transparent Weight 1000g Material UV resin Hardness Shore D 85D Viscosity (25�°C) (cps) 300 Liquid Density 1.08-1.2 Elongation at Break % 25% Wavelength (nm) 395-405 Curing time (s) 3-5s Shrinkage %
Overview Quick Details CAS No.: / Other Names: Photosensitive resin MF: / EINECS No.: KS-3850B Place of Origin: Guangdong, China Type: Synthetic Resin And Plastics Brand Name: Kongshi Model Number: KS-3850B Color: Red Weight: 1000g Material: UV resin Liquid Density: 1.05-1.2 Elongation at Break: 43% Wavelength: 395-405 Curing time: 3-5s Shrinkage: 100 Est. Time(days) 5 To be negotiated Product Description Product Paramenters Model No. KS-3850B Color Red Weight 1000g Material UV resin Hardness Shore D 85D Viscosity (25�°C) (cps) 240 Liquid Density 1.05-1.2 Extension Strength (mpa) 26mpa Elongation at Break % 43% Wavelength (nm) 395-405 Curing time (s) 3-5s Shrinkage %
CNSL Mortar Cashew CNSL Resin Mortar is widely used for Acid Resistant Bricks/ Tiles lining as bedding and jointing mortar. It can be used for jointing Chemical Resistant Stoneware Pipes. It is also used for ETP Plants. It is suitable where excellent resistant property and heavy impacts subjected to the surface of floors and tank is required. Cashew CNSL mortar adheres strongly on the Ceramic, Concrete surface and metals so, it can be used as a monolithic lining for the construction of dilute acids storage tanks. Resistant It is resistant to Acids, Alkalies, mixed alkaline solutions with acids. Resistant to temperature 170�° C (Max.) Preparation of Mortar Preparation of Mortar generally consists of Solution & Powder. In order to obtain good working consistency, the average mixing ratio is 1 Pbw of Solution & 3 pbw of Powder. This ratio will slightly vary depending upon the temperature and working conditions. Prepare small batches of Mortar. Stirrer the Solution thoroughly before use. Place the Solution in a suitable mixing pan and add powder in it. Mix thoroughly with a spatula or Trowel. The mixing operation shall be continued until a uniform mixture is obtained. Make sure that all the Mortar is used from the mixing pan before another batch is prepared. Surface Preparation The cement plastered surface shall be slightly rough in line & level , dry & clean, free from dust, dirt, grease, oil etc., maintaining required slope etc. as no slope can be adjusted or altered in Acid proof lining works. Setting / Curing Cashew CNSL Resin Mortar is a Self-hardening due to its chemical reaction which occurs when the Powder & Resin are mixed together. An initial setting occurs in 10 hrs. at 30�°C Final Setting occurs in 24 to 48 hrs. at 30�°C Curing time: 7 days at 30�°C Please ensure that no water shall be spilled over the bricks lining works before it completely cured. Storage Life Solution: 12 Months at the temperature 30�°C (+2OC) Powder: 6 Months at the temperature 30�°C (+2OC) All two components are stored in cool and dry place under the roof until ready to use it original unopened (Sealed) containers. Packing Solution: 25 Kg. in M.S. Drum Powder: 25 Kg. in Plastic Bag.
Damar Batu Calcutta Grade Bombay Grade Dust Grade Yellow in color Packaged using dual layer bag with nett weight 50 kgs per bag Loaded into 20ft container for 16MT Shipment schedule weekly 4 containers
Identification Chemical substance: short oil alkyd resin short coconut Specifications Solids content: 70%(� 1%) Color - gardner scale : 2 max (50% solution) Acid number: 10 max.(mg koh/g - solids) Viscosity: 10 max.(mg koh/g - solids) 10-15 poise at 50%(25) Main characteristics oil type: c 12 fatty acid Solvent: mixed xylene Standard applications - nc systems - coating for metal - force air drying - oven drying - primer - top coat
Short Oil Alkyd Resin, which find application in nitrocellu-lose based automotive refinishes as a plasticizer and as a binder for stoving finishes in combination with butylated melamine formaldehyde resin. Key Specifications/Special Features "Solid content: 70± 2% Color â?? Gardner Scale: 2 max (50% solution in Xylene) Acid Number: 15 max.(mg KOH/g â?? solids) Viscosity: 10 â?? 15 Poise at 25°C in 50% Xylene." Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG BARREL
Product Description : A medium oil alkyd resin is a alkyd binder made with a medium oil to alkyd resin ratio. Price of product ( USD price or FOB price) : $ 1441/MT Product origin : INDIA Key Specifications/Special Features : Solids content: 40� 2% Color - Gardner Scale: 4 max. Acid number: 12 max.(mg KOH/g) Viscosity(at 33% in MTO) : 45-65 seconds in FC4 at 30�1�C Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 190 KG Barrel
